Kwikee 35 Series Electric RV Step - Single - 5" Rise - 22" x 8" Bolt Pattern

Kwikee 35 Series Electric RV Step - Single - 5" Rise - 22" x 8" Bolt Pattern

Item # LC3691461

lowest price pledge

Retail:$799.95

Our Price: $554.17

You Save: $245.78
RV and Camper Steps

This item qualifies for Free Shipping

Shipping Weight: 43 lbs

Arrives before Christmas with Ground or Free Shipping.
Quantity: 
In Stock, Ships Today
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos

Videos

Powered RV entry step with 25-1/2" mounting plate automatically opens and closes with your RV door. Motor and control unit extend and retract step. Switch kit lets you override step extension. Amber light illuminates when step extends. Lowest Prices for the best rv and camper steps from Kwikee. Kwikee 35 Series Electric RV Step - Single - 5" Rise - 22" x 8" Bolt Pattern part number LC3691461 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (5)
  • Q & A (4)
  • Videos (1)
  • Photos
  • Why etrailer?

Kwikee RV and Camper Steps - LC3691461

  • 1 Step
  • Electric Step
  • Kwikee
  • Motorhome
  • 24 Inch Wide
  • 5 Inch Drop/Rise
  • Steel
  • No Ground Contact
  • 300 lbs

Powered RV entry step with 25-1/2" mounting plate automatically opens and closes with your RV door. Motor and control unit extend and retract step. Switch kit lets you override step extension. Amber light illuminates when step extends.


Features:

  • Electric RV step automatically extends when you open the door and retracts when you close the door
    • Motor, control unit, switch kit, and light included
  • Integrated motor automatically retracts step if it strikes an obstacle during extension
    • Features a fully-sealed gearbox with brass ball bearings and linkage
  • Control unit connects step and step light to the opening and closing of the RV door
    • Ignition override safety feature retracts step when the vehicle's engine is started
  • Switch kit allows you to override automatic extension and lock step in extended position
    • Mounts to door and doorframe and stops retraction when they touch
    • Keeps the step out when parked, whether the door is open or closed
  • Amber incandescent light illuminates step to make it easy to see at night
  • Non-slip tread on step surface ensures solid footing
    • Reflective strip provides additional visibility
  • Sturdy, powder coated steel construction with weatherproof wiring withstands the elements
    • Solid steel drive rods and stainless steel bushings provide additional durability
    • Air pressed rivets at pivot points ensure long-term strength
  • Simple installation with existing mounting holes and wiring harness
    • Hardware sold separately
  • Made in the USA


Specs:

  • Entry height: 5-7/8"
    • Height when folded: 5-3/4" tall
  • Mounting plate dimensions: 25-1/2" wide x 11-3/8" deep
  • Bolt pattern: 22" wide x 8" deep
  • Step dimensions: 24" wide x 10-3/4" deep
  • Drop/Rise: 5"
  • Voltage:
    • Motor: 12V
    • Switch kit: 250V
  • Control unit amperage: 10A
  • Light bulb type: C193, incandescent
  • Control unit wire gauge:
    • Green: 12 AWG
    • Purple: 16 AWG
  • Weight capacity: 300 lbs
  • 1-Year warranty


Kwikee 3691461 July 2019

Lippert 1461 Dims Part 2

Lippert 1461 Dims Part 2 (3)

Kwikee electric RV entry steps provide an effortless, convenient way to enter and exit your RV. The steps are wired to your RV's door and feature an automatic extension, unfolding when the door opens and retracting when it closes. This differentiates the steps from the alternate manual pull-out steps.


Motor, Gearbox, Linkage, Control Unit, and Switch Kit

The updated Kwikee steps manufactured since 1999 require the integrated motor, gearbox, and linkage (IMGL) setup to power the steps. The motor provides the power, the gearbox turns the linkage arm, and the linkage pushes the steps out and pulls them back in when rotated by the gearbox.


As the motor provides power to the control unit and linkage arm, the control unit that is wired to your RV power senses when the RV door opens and closes, and extends and retracts the steps in tandem. When you activate the rocker switch from the switch kit, the control unit will override the automatic retraction when the door closes. This will lock the steps in the extended position.


The switch kit consists of three pieces. The two magnetic sensor tabs mount in the doorframe and on the door. When the third piece, the rocker switch, is activated, and the two door pieces come in contact with each other, the steps will not automatically retract when the door is closed. This allows you to keep your steps extended when parked at the campsite.


The included 4-way plug fits into the existing wiring harness on your RV. Most vehicles should having this wiring already set up. In the event that your RV is missing the wiring, a 4-way pigtail is included to help you hardwire the unit to your RV.


Safety Features

The Kwikee steps include several safety features in an effort to prevent injury to you or your passengers and damage to the RV steps. If an obstruction is detected while extending, the steps will halt and retract back into the stowed position. The steps will also retract when you turn on the vehicles ignition, even if the automatic retraction override has been activated, in case you forget to stow them before driving away.


A built-in safety light is located underneath the mounting bracket for low-light conditions. The amber light automatically illuminates the steps when they extend. It will not illuminate, however, if you have the automatic extension turned off, which cuts power to the steps.


For added safety, the steps have a non-skid, textured coating. This textured surface provides traction and ensures that you have secure footing even when the steps are wet.


Installation

Installing the steps on your RV is simple. Pre-drilled holes in the step's mounting plate match up to holes in your RV's frame for an easy, bolt-on installation. You will need (4) 3/8" x 1" carriage bolts and 4 flange nuts, available in Lippert's mounting hardware kit (LC118155-72 - sold separately) to bolt the steps into place. Use 2 carriage bolts and 2 locknuts on each side to attach the mounting brackets to your RV's frame. If additional brackets are needed to mount the steps to the RV frame, and none are already installed, outriggers (LC301704 - sold separately) may be needed for installation depending on the model of your original stairs.



3691461 Lippert Components (LCI) Quickie 35 Series Motorized Motorhome Entry Step - 1 Stair - 5" Drop/Rise - 24" Wide - 300 lbs

Kwikee Part Number 903509025







Video of Kwikee 35 Series Electric RV Step - Single - 5" Rise - 22" x 8" Bolt Pattern


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Lippert Components Kwikee Single Electric Step Review

Speaker 1: Today you're going to be taking a look at the lifter components quickie 36 series single electric step. Stepping up into your RV can be a bit of a challenge. Especially if the steps aren't working. That's where our replacement steps are going to come into play. With our step installed, when we open the door it's going to automatically come out allowing us to step in easier getting in our RV but at the same time when we close the door, they're going to automatically retract making sure they're not going to catch on anything when we're driving down the road.Now from the top where it's mounted behind this panel, our step is going to drop down a total of five inches. In our application and the step we're using is going to be 24 inches wide by 10 and three quarter inches deep.

There is another step that is available that's going to be 30 inches. To see our website for your specific application and it's going to be made of a nice solid steel construction and have a nice black powdered finish for long lasting durability.The hidden amber light underneath our step is going to make it a lot easier for us to find that step in low light situations and have confidence when we're getting in or out of our RV. The included motor on our step is going to have a solid steel drive rod as well as stainless steel bushes for extended life of the motor. Our steps come with a door switch allowing it to know when to open up and when to close.Now our step is also going to come with a rocker switch in case you choose to manually turn it on and off and not use that door switch. Now that we've seen our steps and gone over some of the features, we do realize that every RV is going to be slightly different but we'll go ahead and give you a brief overview of how to get them in place.To begin our installation, you're going to need to remove your steps and disconnect al the electrical components that are on the steps themselves.

So I got our new step here and we're going to have our pigtail that we're going to wire into our motor home. Then the pigtail is coming off the step as well as the ground wire.So to get our step extended to make it a little easier to work with, I'm going to go ahead and plug in our pigtail and then I have a jump box here which is going to provide my power and grout. So I'm going to take the green wire with the ring terminal on it. I'm going to hook it to ground. I'm going to take my red wire, hook it to power, and then now we're going to take our jump box and turn it on and that should extend the step out.

We've made it a little bit easier to get access to our mounting holes.It's a good idea to have something underneath the step to support it. I'm using a floor jack to help me get the new step in place. It takes a little bit of patience to get everything lined up because it is rather hard to see but once we get the holes lined up, we can put our hardware in hand tight so that step will support itself and we can come back and tighten it all down.Typically you're going to have four bolts, one on each corner holding your step in place. There may be more but you just want to make sure that you replace them all and get them all nice and tight. Now these are the wires that we cut and as you can see they have some inaudible 00:03:15 connectors on them.

That's because it was hardwired into the motor. Now we're going to use the other end of the pigtail and then just connect our wires here so we can have a quick disconnect and if any issues arise we can disconnect it. It would be a little bit easier rather than cutting and splicing every time.So we'll go ahead and cut back these butt connectors and strip the wires and start attaching everything color for color. We're going to take a heat shrink butt connector and now these don't come with our kit but if you need some you can pick some up on our website. Then we can take the other end of our pigtail and we'll find the brown wire. It's already prestrippe.d So we can just put it into the other end of our butt connector and crimp it in place. Now we're going to do that for each one of our wires and we're going to connect them color for color. You should have a white, a yellow, and a red left on the motor home end as well as the pigtail end.We'll be using a heat gun to shrink down the connectors. I just want to mention if you are using an open flame you want to be extra careful not to burn the wires or the connectors themselves. Now this is where our ground from our previous step was installed. I'm going to go ahead and remove that bolt, take our new ground wire, slide the bolt and washer around it, and line up the hole and reinstall that bolt. With the jack out of the way, we can go ahead and shut our door. We can go ahead and go back underneath and start cleaning up all those wires.That'll finish up your look of the lifter components quickie 36 series single electric step.


Customer Reviews

Kwikee 35 Series Electric RV Step - Single - 5" Rise - 22" x 8" Bolt Pattern - LC3691461

Average Customer Rating:  5.0 out of 5 stars   (5 Customer Reviews)

Powered RV entry step with 25-1/2" mounting plate automatically opens and closes with your RV door. Motor and control unit extend and retract step. Switch kit lets you override step extension. Amber light illuminates when step extends.

- LC3691461
by:

installed on 1999 Monaco Dynasty did have to drill mounting holes just a little to lineup.Works great, No problems at all. Finish seems to be holding up well. would highly recommend. 710806



- LC3691461
by:

Excellent product recommendation by etrailer. Excellent installation. 576062



- LC3691461
by:

The Kwikee step was a direct replacement for a damaged step and was a perfect fit. ETRAILER kept me informed of delays and offered suitable replacements. I chose to wait on my original order and still received it in a very timely manner. I have been very pleased all products I have purchased from ETRAILER. 525595



- LC3691461
by:

I hit a curb and damaged the RV step, I called etrailer and gave Pat my info and she put me on hold while she checked with Manufature for correct part #. She emailed me with timely progress of my order. Upon receiving my order I removed the damaged one and installed the replacement. It was correct replacement and only took I hour to complete and is working great. Thank you 470395



- LC3691461
by:

Couldn't be more happy with the product. 353240


5
5

Ask the Experts about this Kwikee RV and Camper Steps

Do you have a question about this RV and Camper Step?


  • Comparing Lippert 35 Series Electric RV Step Units
  • The four Lippert 35 Series RV electric step items are essentially the same product but they differ in some of the included components. In certain cases the original electronic control unit on the RV unit may still be functional and only the step and motor are needed. Part # LC3691462 includes the step, motor and switch kit. Part # LC369146 includes the step, motor and control unit. Part # LC3756271 includes the step, motor and switch kit. Part # LC3691461 includes the step, motor,...
    view full answer...

  • Powered Single Step Recommendation for 2002 Damon Escaper
  • You'll want to measure the distance between the mounting brackets on your RV that are holding your current steps so that you can pick out the steps that will fit as a replacement the easiest. Since you said your current step is close to the ground you'd most likely want to go with the Lippert Kwikee 35 part # LC3691461 as it has the smallest amount of drop from where it attaches to the RV of 5 inches. Other powered steps have a drop of 7 inches instead. The mounting bracket width of...
    view full answer...

  • Step Options for 2017 Ram ProMaster 136 Wheelbase
  • If a step was needed along one of the side doors on your 2017 Ram ProMaster 1500 you could install Carr Step for Cargo Vans - Grated Steel Platform - Galvanized - 24" Long - 500 lbs Item # CARR501090 which is a manually operated retractable step. You might be able to make it work at the back but I can't guarantee it. There aren't any electric options that will work. Another option, if the van has a 2 inch trailer hitch, is a step such as # CARR190011 or # HE3045. If it doesn't have a...
    view full answer...

  • Frame Only Step Needed for Kwikee 35 Series Electric Steps
  • For the Frame Only part of the Kwikee 35 Electric Step you will want to use part # LC3691461 on our site. I spoke with my contact at Lippert Components and confirmed that this is the correct part for your Kwiki 35.
    view full answer...


Do you have a question about this RV and Camper Step?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality rv and camper steps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv and camper step information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video by:
Andrew K
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Dustin K
Written by:
Chelsea B
Installed by:
Robert C
Updated by:
Brian T
Updated by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.