Reese Eclipse 4 Bike Rack for 2" Hitches - Tilting

Reese Eclipse 4 Bike Rack for 2" Hitches - Tilting

Item # 63124

lowest price pledge

Retail:$189.26

Our Price: $160.12

You Save: $29.14
RV and Camper Bike Racks

This item qualifies for Free Shipping

Shipping Weight: 30 lbs

Quantity: 
In Stock
Reese RV Hitch Rack - 63124
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Motorhome
  • Towable Camper
  • Fifth Wheel
  • RV Hitch Rack
  • Hanging Rack
  • 4 Bikes
  • Reese
  • Fits 2 Inch Hitch
  • Locks Not Included
  • Class 3
  • Frame Mount
This economically priced, single-arm bike carrier lets you access the rear of your vehicle by simply pulling a pin to tilt the rack down. Heavy-duty straps secure your bikes in the rubber-padded cradles. Anti-rattle hitch pin holds the rack steady. Lowest Prices for the best rv and camper bike racks from Reese. Reese Eclipse 4 Bike Rack for 2" Hitches - Tilting part number 63124 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (578)
  • Q & A (173)
  • Videos (4)
  • Photos
  • Why etrailer?

Reese RV and Camper Bike Racks - 63124

This economically priced, single-arm bike carrier lets you access the rear of your vehicle by simply pulling a pin to tilt the rack down. Heavy-duty straps secure your bikes in the rubber-padded cradles. Anti-rattle hitch pin holds the rack steady.


Features:

  • Hitch-mounted rack carries up to 4 bikes on the back of your vehicle
  • Tilting upright mast allows access to your vehicle's rear cargo area
    • Pull pin is secured to bike rack with a cable so that it can't be lost
  • Sturdy cradles with heavy-duty hook-and-loop straps secure bikes to rack
    • Rubberized pads line the inside of each cradle to protect the finish on your bikes
  • Single-arm design works with many bikes that have alternative frames and frames with large tubing
    • Women's and children's bikes may require a bike adapter bar (sold separately)
  • Anti-rattle hitch bolt reduces movement of rack in hitch receiver
  • Slots in the top plate allow you to thread a cable lock (sold separately) through the rack to deter theft of your bikes
  • Safety reflector provides nighttime visibility
  • Powder coated steel is durable and corrosion resistant


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Carrying capacity: 4 bicycles
  • Weight capacity: 120 lbs
  • Maximum bike top tube diameter: 2-1/4"
  • Distance from center of hitch pin hole to upright bar: 8"
  • Distance between cradles (center to center): 5-3/4"
  • Limited 1-year warranty


Approved for use on cars, trucks, vans, SUVs, RVs, motorhomes, and towable campers

Note: A bike frame adapter bar (sold separately) may be required to mount certain bikes or keep your bike level on the rack. Most women's, children's, or alternative frame bicycles will require a bike adapter bar.

63124 Reese Eclipse 4-Bike Carrier for 2 Inch Trailer Hitches - Single Arm - Hanging Style - Tilting

Replaces Highland 2002700

Replaces Tow Ready 63124



63124 Installation InstructionsInstallation Details 63124 Installation instructions



Video of Reese Eclipse 4 Bike Rack for 2" Hitches - Tilting


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Reese Eclipse 4 Bike Rack Review

Speaker 1: Today we're going to be taking a look at the Reese Eclipse tilting 4-bike rack for 2" hitches. Part number is 63124. The Reese Eclipse is a hanging-style 4-bike rack. It's got very sturdy construction and it's a really good cost-effective solution to transport all different types of bikes anywhere you might want to go.Another great thing about the Eclipse rack is that it is approved for use on motor homes, fifth wheel, and bumper-pull campers. Now the Eclipse is designed to work with all different types of bikes, whether that's mountain, road bikes, women's bikes, children's bikes. Rather than having the traditional two arms that come out, we're just going to have one center cradle in all four positions for our bike to rest down and on.

Here you can see we're using a bike adapter bar. That just helps us maintain the levelness of our bike. If we weren't using that, we could still put it underneath our tube here. But you could imagine that back end would be kicked up a little bit higher than the front, and it's not going to allow them to sit as even as with the bar.Also to help increase visibility you'll see here on the back we've got a built-in reflector. As lights hit that, people will be able to see that and determine that you do have a rack on the back of the vehicle.Now all along the top section here you're going to see six oblong holes.

These are designed so we can pass a cable lock through and around each of our bikes, and then reconnect it at the back. This will allow you to lock the bikes to the rack. By using a cable lock you're able to secure the bikes to the rack so you won't have to worry about them disappearing. Now with bikes loaded we are able to tilt the rack away from our vehicle. Now when you do this with this type of rack, you want to keep in mind your bikes are probably going to make contact with each other, and it's likely the larger bikes will touch the ground.

So while you can do it, if you have higher end or nicer bikes, not something we necessarily recommend.You're also probably going to need two people to do this if you have it fully loaded. We'll have AJ come in and help us out. He's going to lift on the back of the rack slightly. That's going to help us remove the pin. As you can see, you just want to guide it down pretty gently until either one of the tires on your bikes makes contact with the ground or it rests on that rubber gasket or that rubber piece there.

As you can see, full access into the hatch. Now that's going to save you a lot of time and a lot of headaches as compared to unloading all of the bikes and tilt it away. But remember those things that we talked about. Then to bring it back up, just going to reverse the process.Now when not in use, the shank of the rack will also fold up against the mast so it's not sticking out there. This is going to allow you an easier time storing it. Now to install the rack we need to line up the threaded hole that's here on the left side with the pin hole in our hitch, so we'll just be sliding that in. Then we'll thread in our provided anti-rattle bolt. This should be threaded in from the left side. You want to be sure that you've got your lock washer on there when you do it. We'll get that ran down hand tight. Then we're going to tighten it with a 24mm socket. We'll want that to be nice and snug. Then we can install the clip. That's just going to slide right in.Now a couple things I like. You can see the steel cable here. That's going to help ensure we don't lose our pin. As the rack comes down, it's going to rest on the rubber portion right here. That'll help make sure that we don't have any scratches or anything on that powder coat to help resist corrosion for a long time.Now in all four of our cradles you can see we've got the V-shaped rubber that's in place here. That allows the top tube of our bike to rest down and in. We're not going to have to worry about damage. Also, that larger groove you see on the bottom can help accommodate your brake and shifter cables.Now the cradles, the main portion of the rack, and the shank going into your car have all been treated with a nice powder coat finish. This should help to resist corrosion for a very long time.Now to get your bike installed on the rack you're of course going to want to remove the hook and loop straps, get them open. Then we're just going to place the top tube of the bike into the cradle. At that point we'll bring our strap through the ring on the other side and pull it down tight just like that. We can do the same thing for our other one.Now the cradles and straps have been designed to work with the smallest top tubes on the market all the way up to 2-1/4" in diameter. Now at this point you're ready to load up the rest of your bikes. You do want to keep in mind the rack has a 120 pound maximum capacity so you want to keep your bikes to about 30 pounds a piece. The heaviest bike should go in the front. As you go back you want those to get lighter. We found it's generally best to alternate the direction of the handlebars, so we have this one loaded this way. Our next one we would load that way.Now we can take just a second and compare the Eclipse to another very, very similar bike rack. In this case we're going to go with the Swagman Trailhead. Really good, well built bike rack just like what we have here with the Eclipse. It has a dual-arm setup and some pretty big cradles on it with rubber straps. Now those cradles are going to offer anti-sway control. This rocking motion that we have hr with the bikes will be eliminated slightly using that setup. But it can be harder to get bikes loaded up on there. Especially with when you've got the smaller areas like this, it's going to offer you a little bit more of a challenge. It's a 4-bike hanging-style rack just like what we have here. Tilts away from the vehicle very similarly to what this is going to do.Now a few other things to keep in mind. The Trailhead will work with 1-1/4" or with 2" hitches, where the Eclipse is going to be limited to just the 2" hitch. The weight capacity on that Trailhead is a little bit higher. Where the Eclipse is at 30 pounds per pike, the Trailhead's going to be at 35. Now that's really only going to come into effect probably if you've got ebikes that you're trying to load up. Then the last thing would be that while we can tilt this one away from our vehicle with the bikes loaded, it's not going to be something we can do with the Trailhead.Now one area I think the Trailhead does have an advantage over the Eclipse is going to be in the shank design. With the Trailhead, it comes up about 3" as it comes back. That's going to help to give us more ground clearance. That can be especially important if your hitch is very close to the ground. Now in another area where the Eclipse is going to have an advantage over the Trailhead is that we're able to use it with fifth wheel and bumper-pull campers. With the Trailhead, it's not approved for use on those.The Eclipse also receives really positive customer reviews. It's like Daniel A. said: "I was thrilled with how well packaged the rack was and I had no trouble assembling it and putting it on my vehicle. It fits great. The bikes I have fit on the rack well. It's one men's mountain bike, one women's 10-speed, and one child's bike. The child's bike is a close fit but it all works well. Great product." After one year out he said, "One year out and this product is still as great as it was when I first got it. No complaints here."Here on our test course we'll start by going through the slalom. This is going to show us the side to side action. This simulates turning corners or evasively maneuvering. Once we get to the alternating speed bumps, we'll see the twisting action. This will simulate hitting a curb or a pothole, or driving over uneven pavement. Once we get to the full speed bumps, we'll see the up and down action. This will be just like driving in and out of a parking lot, parking garage, or driveway.That'll complete our look at the Reese Eclipse tilting 4-bike rack, part number 63124.


Customer Reviews

Reese Eclipse 4 Bike Rack for 2" Hitches - Tilting - 63124

Average Customer Rating:  4.7 out of 5 stars   (578 Customer Reviews)

This economically priced, single-arm bike carrier lets you access the rear of your vehicle by simply pulling a pin to tilt the rack down. Heavy-duty straps secure your bikes in the rubber-padded cradles. Anti-rattle hitch pin holds the rack steady.

- 63124
by:

Arrived quickly. Assembled in a few minutes. I've used it 3 or 4 times and it is easy to load and secure the bikes. The velcro straps are better than rubber. 137750


Comments

Just a follow-up note concerning the bike rack: it is the easiest, most efficient bike rack that I have seen - simple, inexpensive, and faster loading than any of those of my friends. They envy this one.

Jack - 06/29/2015

12888

- 63124
by:

Just received last week, haven't had any opportunity to use yet. Wish you offered a locking pin a receiver hitch for more security, instead of the threaded pin. Thats it for now 130103


Comments

Good, on the heavy side thow

Rafael R - 05/12/2015

11620

- 63124
by:

solid unit with decent paint. should last quite a while. reasonably priced, good service follow up. happy customer. 92207


Comments

still going. safety attachment for the tilt release pin didnt last long but not a problem. mounts and dismounts easily, hook and loop straps still work well. maybe side mounted reflectors/labels would be nice as it protrudes quite a bit and is somewhat unobtrusive when no bikes are mounted on it. still a happy customer.

k h - 01/27/2015

8979

- 63124
by:

I'm from Canada, and strong well made products like this tend to be hard to find, and quite expensive. I bought this bike rack, and the to carry it. Both are extremely well made and were an excellent price. I would definitely recommend these products. Note that someone who is quite petit may find this bike rack a bit heavy to move around and mount into the hitch. 554382



- 63124
by:

I can't say enough good things about this product. It arrived on time and in perfect condition. It was also very easy to put together and only took me about 10 minutes total. The quality of the hitch is top notch and should last a long time. It's very easy to get our bikes on and off the hitch and we can't wait to go on some bike adventures. 228678


Comments

Love it.

Brian M - 09/30/2016

21338

- 63124
by:

Well made bike rack. Took a trip to Florida from Missouri and it held my bike and bike trailer very well. I like that it has anti-rattle pin that comes with it. Had to purchase a separate lock for it but that is fairly And reasonably priced - so no big deal. Specialty pin that holds the rack in upright position has a wire holder (so You dont loose the pin). So this wire holder snaped off after couple of short trips as it wasnt welded strongly enough, but I was able to re-attach it with home made ring/loop and a self taping screw. Overall good product and highly recommend it. 302279



- 63124
by:

When I purchased this rack I was assured that it would fit. I have a 2017 jeep and it doesn’t fit. I was told that since I didn’t have the original box, (I threw it away because the box was damaged when I received it) a 20% restocking fee would be applied. I also tried to return a bar adapter and was told the shipping would start at $12 to return. This entire order was a mistake. I will never purchase from them again! 562857



- 63124
by:

The bike rack was very easy to put together and it fit my Jeep perfectly. I wish I had followed the advice that I read before ordering that suggested I buy the lock for it. Perhaps you could include it as part of the package and increase the cost accordingly. 140447


Comments

Still love the bike rack a year later. Did the lock become part of the package? I have recommended this rack to many people.

Tammie - 07/09/2015

13227

Thanks for your follow up and feedback, a lock is not included with this bike rack but is listed as a related product.

-- Rachael H - 7/10/2015


- 63124
by:

Had some doubts since it was lot less expensive than the Thule Parkway that I've used in the past. But I was pleasantly surprised. The construction is solid. The design is simple and effective. Biggest difference being the single support vs. double bar of the Thule. Used it this weekend on a long road trip transporting a mt bike. Solid! Key is to balance the bike on the rails. The bolting hitch pin work great. Zero rattle. The support bar does not tilt like some of the ones out there but not a big deal for me. The whole rack does and is actually a far better design than the Thule.....much stronger. Can't go wrong with this one. Or etrailer for that matter. 63984



- 63124
by:

Just finished putting together and mounting my new bike rack on the back of my Highlander. It took less than 30 minutes to assemble and mount on vehicle. I then placed my bike on the rack and took a brief drive with it . The only thing I noticed is that you may want to use a bunge cord to hold the front wheel in place to keep it from swinging when driving. I may also consider looking for a small padlock to replace the hitch pin clip for security purposes. The tilting feature, for ease of access in to vehicle cargo area is also a plus. While I have not used it yet for a 'road trip', I feel very satisfied with the quality, function and price of the bike carrier. 347119


Comments

I use the bike rack on our Toyota Highlander and have been pleased with it. At first I thought a 4 bike rack was more than I needed, but now am glad I bought it instead of a two bike unit. A couple of nuisance items, not a big deal: The threaded locking pin that holds the unit on the trailer hitch, slides in from the left. For a left handed person, it is less convenient than I would have preferred. I was also curious about it being metric instead of standard, again not a big deal. Also - the hole it slides in to is recessed making it difficult to tighten up with anything other than a socket with an extension. Thinking ahead, it is not much of a problem, but I have to be sure i have a metric socket plus extension with me when it comes time to remove. Having said this, there may be a security reason for this design.

Roger D - 03/05/2018

35440

- 63124
by:

Very solid, ruggedly built receiver hitch rack. Spacing is good for four bikes. Design is best for road bikes or hardtail mountiain bikes with traditional diamond frame geometry. That's what I have, so it works well. May not be suitable for newer hardtail mountain bikes with more extreme frame geometry (can carry but bike will be nose down). Same for mixte frame (girls bikes, but they will be nose up). May or may not be a good fit for curved tube cruisers - depends on the design. Probably not suitable for full suspension bikes or bikes with radical departures from diamond frame design. But if you have a diamond frame bike with a traditional top tube, this rack is just what you need, and one of the most solid and easy to use racks you can get - just as good as the major brands at less than 1/3 of their price. Easy to install - insert in receiver then tighten the bolt with a wrench to secure the rack. Pivots down to allow tailgate to open on a van or SUV. May not fit on an SUV with tailgate mounted spare tire. A very good quality rack for traditional bikes. Couldn't be happier. 453864



- 63124
by:

Good, sturdy rack. Extremely fast delivery. Just installed and put four bikes on. Drove about 7 miles around the neighborhood hitting every bump and hole I could find. The rack swayed a little to each side with sharp turns but all stayed well secured. I'll probably put a shimmey on the inside the reciever to reduce the sway a little and tie wheels together etc... to make it more secure. I think it will suit might needs just fine. 570137



- 63124
by:

The value is excelent. As other reviews have indicated it is a bit heavy but it is very sturdy. the other racks we have had were lighter but the bikes scraped into each other a took the finish off. The racks were for a Rave 4 the back door doesn't open all the way but there is enough room for access. I don't usually do these types of evaluations, actually this is the first, but I felt that the customer service, product, price, assembly, and the quickness of delivery were cause to write this. 210878


Comments

We purchased this bike rack last year and mostly use it on the back of our camper when we travel. It is an excellent product I never worry that it is doing its job.

ski - 07/10/2016

19281

- 63124
by:

We have been using this rack for almost three months now. It is sturdy and easy to get the bikes off and on. We have only used it for two mountain bikes (one mens and one womens - we have not needed anything extra for the womens one). Although this is a great product and is a great price and we use it A LOT we are disappointed that we did not realize that is does not tilt down if you want to leave it on your vehicle without bikes. (This was our mistake by not paying better attention when we purchased it). It does stick out very far and I have hit my head on it several times. It is a bit heavy for me to put it on the car alone (my husband has to do it). Again, this is a great product BUT if you want to leave it on without bikes get one that tilts down when not in use, I would trade this one in a heart beat for one that does if I could. 43269



- 63124
by:

All of my purchases from e-trailer have been very good products. This bike rack is no different.. It was EASY to put together and is built very well. The price was the best around and I searched everywhere..! Good buy and a good Internet company..! 96633


Comments

I still love the rack... I read some reviews that were critical of the bikes moving and the rack wobbling in the receiver.. I think they are kinda silly... Its a great bike rack for the price..!!

Wade - 03/05/2015

9885

- 63124
by:

Another easy to install product that fit very well into the purchased receiver. Once installed and loaded with bikes, we drove approximately 400 miles before unloading the bikes and tucking the unit away. Reinstallation was quick adn efficient as was loading the bikes for the return trip. Well spent money. 219137


Comments

We repeated our trip from a year go and the bike rack still works very well. We did experience some spacing issues with a fat tire bike, but learned that if we removed the pedals and altered the positions of the bikes when loading, everything fit well. Very good investment and now when we take the bikes on vacation, it is saved money as the cost of renting bikes has been eliminated and in the second year, the money saved has exceeded the amount invested in this rack and the receiver.

Tom P - 08/14/2016

20228

- 63124
by:

This product truly exceeded my high expectations. The other reviews of this product are correct. The build quality is excellent. I had a Thule Hitch rack before and I think this is a much better build quality. Nice, heavy steel. The locking bolt for the hitch mount is just that....a bolt instead of a standard hitch pin which also makes it more sturdy. The bikes are very stable on this rack. It also sits higher than a typical hitch carrier which I like as well. It comes nearly completely assembled. You only have to install the 4 holders onto the top of the rack with 8 allen bolts (allen wrench included) and 2 bolts to put the top half on the bottom half. Does not take long at all to assemble. Etrailer was great as well and had my order to me within 3 days with standard shipping! 22528



- 63124
by:

Good rack at excellent price Strong rack, easy to use, really does hold 4 bikes securely in place. Used it on a 2500-mile road trip with no problems and minimal impact on gas mileage. Be careful if your hitch receiver is low, since the corner of the rack can easily hit the ground in driveway dips, speed bumps etc. Don't expect to use the tilt feature while bikes are on it; the weight of the bikes presses on the tilt pin so it can't be pulled out. The first one I got had a flaw in the base piece so the tilt pin holes wouldn't align properly when the pole was vertical. eTrailer Customer Service was very responsive and got me a replacement in time for our trip. I am also happy to see they have clarified the description about the hitch lock (this bit me because I tried to get keyed-alike hitch & cable locks); too many companies ignore suggestions like this. Again, Customer Service was great in sorting this out quickly. Thank you! And thanks also for your great Web site with instructional videos etc. - very useful! 1423



- 63124
by:

I have used etrailer.com before and it remains one of my favorite on line companies to trust. They not only have the best prices but they also have what I consider the best service. In this case I was able to watch a very well made video that showed a perfect, step by step instruction of just how my trailer hitch and trailer lights assembly was to be installed. The video was precise as to how to do the procedure. After watching the video I felt very able to complete this project without injuring my vehicle. On top of that I saved $170.00 and did the whole job in less time than I could have driven to the garage, waited for the installation and then driven home. Plus I saved the $10 in gasoline to drive to the shop and back. Etrailer.com played no games with me at any point in the transaction and they delivered the goods, via UPS, as promised in a timely manner. Then they checked up on the deal and made sure it was done as I wanted it to be. On top of that they carry a full line of the best quality products. I wish all companies, on-line or brick and mortar, could measure up to etrailer's level of performance. I doubt that this will ever happen. I really enjoy etrailer.com's professionalism. 24175



- 63124
by:

The Pro Series 4 bike rack was an excellent choice for my needs. Sturdy construction, features that bike racks costing 4 times as much have and ease of assembly (under 15 minutes) made it a good buy. We will use it occasionally when we want to go riding with grandkids so it has to hold 2 adult and 2 kids bikes. I might need to buy an adapter bar once I see how the kids bikes rest on the cradle. I attached the rack to the car hitch and it felt very sturdy with minimal looseness. The tilt feature is great since it was installed on an Audi Q7. Deliver was quick(3 days) and phone service by Cathy was informative. Pictures and reviews were helpful for determining what bike rack would work better for our needs. For $119 I am very satisfied. 158973


Comments

I used the rack numerous times this summer. It is easy to install and remove. Pretty heavy construction and good locking mechanism. Did not need to buy the adapter bar as bikes fit fine without it but with some maneuvering of bikes. Still satisfied with this purchase.

Ed S - 11/03/2015

15771

- 63124
by:

EZ PZ Good Experience no complaints only compliments. Very nice solid piece of equipment. Goes together quickly and had the product within three/four days of ordering. Very good experience. E trailer- was the way to go: Reviews helped so much I didn't need to do a thousand searches to make sure I was getting the best price and quality bike carrier. tnx 124444


Comments

I still stand by my original post good product. I have a 2009 Honda odysey that I bought the rack for. I literally can get going with three bikes in about eight to ten minutes. I love it.

J - 04/10/2015

10726

- 63124
by:

Haven't loaded bikes yet. Just finished assembly, which was a breeze. Feels a little loose when mounted, but don't know if that is any different than other bike racks. Only small issue with assembly was the supplied Allen wrench. The short leg is barely long enough to reach the screw inside each cradle. I used one that I had around so it went together smoothly. Did take about 15 minutes to put together, just like the box says. etrailer received my order, shipped it and I got everything installed in less than a week, start to finish. 362641



- 63124
by:

What a great product.... As a causal biker with kids I really wanted an inexpensive rack to save me from the torture of loading bikes into the back of my SUV. I looked around and found this Tow-Ready rack for $99. Not being an avid user and having little experience with other racks I can only say that I don't see it getting any better or easier than this. the rack was simple to put together in about 10 minutes(though I will add that a took the advice of another reviewer and assembled it in the hitch receiver which made things much easier), and seems strong, sturdy and durable. There is a little play in the rack, but not much, and during my "test drive" experienced little by way of noise or rattles. I do think a bungee cord or two are needed to keep the bikes from swaying and wheels spinning but nothing major. Overall for a much reduced price this rack seems like a dead bang winner. I am extremely happy and would recommend it to anyone. You will not be disappointed with this purchase. 2818



- 63124
by:

This is my first bicycle rack purchase. My wife and I just bought Haro mountain bikes and needed a transport method. I was concerned when we received the package because the box was pretty badly beat up and crushed. But when I opened it up there was no damage to the product detected. I bought this rack due to the large number of positive reviews and the positive experiences described with etrailer.com. I was very pleased with the build quality right out of the box. The steel is quite a bit heavier gauge than I expected, and the assembly was super easy. I've only used the rack a few times so far, but I don't expect to have any issues due to the quality of materials used. I'm also pleased to report that I did find the same rack elsewhere at a slightly lower price, but when I contacted etrailer about the price they honored their "Lowest Price Pledge" and returned 110% of the difference without any hesitation. I was concerned that the rubber-lined "saddles" wouldn't fit our bikes properly due to the oval/oblong shape of the Haro backbone. But the bikes fit very nicely, and the velcro straps that hold the bike in place are plenty long for the application. I am very pleased with the purchase and will definitely look here first for any future similar needs. 214614



- 63124
by:

I'm happy with the product and the price. Arrived very quickly too. As always, etrailer customer service is top notch. The only shortcoming for the item resides with the retaining clip for the pin that secures the unit to your car. Once you've screwed in the pin (though you'll need to have wrench available, perhaps left in your glove box, to tighten it), the hole in the pin that the retaining clip goes in may be oriented in such a way that you can't easily put the retaining clip on. (Not much space down there local to the trailer-hitch tube.) I could only do so from below, which means that if the retaining clip comes loose during a long and highly vibratory drive, it'll fall away. Ordinarily, you'd want to install a retaining clip from above, so that gravity helps keep it in place. I'll probably go and buy a circular key-ring-type of thing that'll work just as well. 502103



- 63124
by:

Very nice rack, well built, strong & easy to put together. I think I will get a lot of year's use out of it. J 201893


Comments

Im still very happy with the bike rack, I plan to use it plenty this summer.

J - 06/18/2016

18823

- 63124
by:

The detail on etrailer.com gave me a lot of confidence that the Pro Series Eclipse 4 Bike Rack would fit well on my 2013 Nissan Rogue. I was thrilled with how well packaged the rack was and I had no trouble assembling it and putting it on my vehicle (I am not handy man). It fits great! The bikes I have fit on the rack well (1 men's mountain bike, 1 women's ten speed, 1 child's bike). The child's bike is a close fit but all works well. Great product, from what seems a great company. I appreciate the detail and videos on the website. 140545


Comments

1 year out and this product is still as great as it was when I first got it. No complaints here.

Daniel A - 07/11/2015

13282

- 63124
by:

Reese bike rack is heavy built and should last a long time. 550622



- 63124
by:

Assembled and used the hitch over memorial day weekend. Attached to 2008 Dodge Ram 2500, carried 2 adult bikes, 2 children's bikes. PROS: - Sturdy - Heavy duty - Well made CONS: - Reflector on the end arrived broken - Weight. This thing is very heavy by itself. - Allen wrench included is useless; too small to be used to tighten the screws due to location - Tilt mechanism didn't tilt low enough to get my tailgate down; I removed the stop bolt to enable this. - When tilting down, the bikes obviously like to shift around, and depending on how they are mounted, this could (and did) result in some less than favorable 'handlebar-in-spokes' conditions. - Also when tilting down, it is pretty much a two-person job when bikes are loaded due to weight. One person supports the rack and the other pulls/inserts the pin. - Some slack is built into the hitch piece, the pivot pin, and the lock pin, so the bikes shake around side to side some. 1 layer of gorilla tape around the hitch removed some, but 2 layers was too much. - The pin that is included to lock the rack into your hitch is very strange. Its at least an inch longer than it needs to be for a 2" receiver, and for some reason its threaded for about 2" close to the non-pin end. The rest of the bolt is thinner as well. - Children's bikes may or may not be able to fit on here on the top rail of the frame. One of the bikes I had, I had to attach it to the bottom rail instead, since I couldn't get the frame around the mounting blocks. It still seemed to ride ok, its just a little worry-some. Overall summary: - This is a fine hitch, and most of the time it will be on the back of my fifth wheel trailer, so I won't need the tilt mechanism. If you are purchasing this mainly due to the tilt, I would look elsewhere, since it's pretty painful to use, even if your tailgate clears it. 198188



- 63124
by:

I am so excited to begin using this. Through the help of Etrailer.com, they were able to find me a bike rack and hitch that fit my Rogue. The employees were understanding of my budget and assured me that getting a hitch was a much safer bet. In a matter of a few hours I had fully installed a hitch and bike rack. What I love about this so far is that when I went to the store I was able to remove the pin and it gave me enough of an angle so that I could completely open my trunk without having to remove the entire product off the hitch. My only issue is that the instruction manual does not give you the tool size you need to tighten it to the hitch. Trial and error we found that a 7/8ths is what it needed. 546716



- 63124
by:

The bike rack arrived quick and was well packed. No damage or missing parts. It holds my bikes well with the use of a couple bungee cords. There is no vibration since the hitch pin is threaded into the bike rack. I keep the wrench in my truck in case I need to remove the rack. I would recommend this bike rack to my friends. 129099



- 63124
by:

I ordered this Bike Hitch 3 days ago, and it arrived today. It was securely packaged and easy to assemble with simple instructions. The bicycle mounts are cushioned with secure 2-point velcro wraps. The Hitch is sturdy and solid. I was very happy with the service I got from etrailer and I look forward to the new bicycling freedom that this bike hitch will give our family... and for a good price, as well. 93851


Comments

This bicycle rack has worked out great for us. We have used it on long trips and on short trips. It holds 5 bicycles, solid, but compact... unfortunately, the vehicle that we had with the trailer hitch on it a Honda van got totaled last fall, but I will look forward to using the bicycle rack with the next vehicle that we can put a trailer hitch on.

Brad B - 02/20/2015

9629

- 63124
by:

Just received it Friday & with all the rain we’ve been getting I haven’t had a chance to check it out. I did put it together & slapped it on my Jeep! It took about 5 minutes...real e z and it seems rugged & strong 555132



- 63124
by:

Very pleased with quality of product — no need to spend more on high dollar racks. We are the typical family of four with decent bikes — no carbon fiber etc.! Simple system to secure bikes, Velcro holds them securely. 440533



- 63124
by:

Installed it myself in my garage. Really had to clean our existing drill holes in the frame to get screws to go all the way in. I would really stress that if your car is five years old like mine. Has worked great! 648024



- 63124
by:

I love this bike trailer. It works easily to hold 4 bikes securely. 642354



- 63124
by:

Great product! Very well built and convenient...thank you! 642134



- 63124
by:

I am extremely happy with the Reese bike carrier. When I received my carrier it as missing a screw but a replacement was sent out immediately. The rack was easy to put together and I would recommend the product to anyone needing one 634236



- 63124
by:

Works as intended. Extremely durable & well-made The hinge is a great touch, for door access without removal. 633267



- 63124
by:

This bike rack has performed as expected. My son races mountain bikes as a high school student. We transport his bike and sometimes ours to his twice weekly practices and cross state races all spring. My only complaint is the cable that keeps the hinge pin connected to the rack broke at the rivet just this weekend. 629038



- 63124
by:

received my new bike rack quickly. I'm not fond of having to put things together, but this bike rack went together relatively easy. its a little heavier than I thought, but nothing I can't handle can't wait to get my bike back from its spring tune up so I can try out the new bike rack 627945



- 63124
by:

I am very pleased with the bike rack, it is easy to insert into the hitch mount. It does not sway and it has provided an easy way for me to transport my bike. 624237



- 63124
by:

This is an excellent product for my Mazda CX7. I've had other bike carriers that fall apart after a while. This one has lasted. It wasn't the easiest to install and I had to spend some additional money for a mechanic to install. But it is super easy to use. If I'm not using for an extended period I can easily remove the entire unit from the base and then put it back again when needed. It is sturdy and I'm not worried when I'm carrying my bikes. Definitely, recommend this product. 619230



- 63124
by:

Good quality 616095



- 63124
by:

Easy hitch install (used a small crowbar to get the rubber mounting retainers off of my Tuscon. No way to push them off with your hand.) The bike rack works great. Kinda heavy..but sturdy. Used it several times and put 4 bikes on it once. All four bikes on the back could mess with your blind spot sensors but that is a small negative. Good products. Would buy again. 615221



- 63124
by:

I love it. It's sturdy, takes up little room and holds my two adult and two kids bikes perfectly.I also bought four bike bars so bikes are level. Easy to load and unload bikes and secure bikes with the velcro straps. Great product! 608355



- 63124
by:

Excellent on-time delivery product excellent thank you 604167



- 63124
by:

Very solid, easy install. I put four adult size bikes on the rack. I haven’t made the trip yet, but the seem to fit on the rack nice and snug. The brackets for mounting the bike seem a lot more solid than other racks anywhere in this price range. 602767



- 63124
by:

Good product, easy to setup 601209



- 63124
by:

Very happy bike rack it is easy to mount and remove. The hinge makes access to the bed convenient. 600344


54
588
Show More Reviews

Ask the Experts about this Reese RV and Camper Bike Racks
Do you have a question about this RV and Camper Bike Rack?


  • Hitch Mount Bike Rack for 4-Bikes on the Back of a Travel Trailer Using Curt Bumper Hitch E-100
  • There are only certain bike racks that are rated for use on the back of an RV or trailer but the Thule Hitching Post Pro # TH934XTR is not one of them so I cannot recommend it. But there are several 4-bike racks that are rated for this application. You can use the Swagman Trailhead # S63381. This rack is most like the Thule. It features a 2-arm design and anti-sway cradles. It is a sturdy build to handle the riggers of being at the back of a trailer. Other racks that are rated for this...
    view full answer...

  • What Is Needed To Attach And Use Reese Eclipse 4 Bike Rack With 2013 Dodge Grand Caravan
  • Yes, you will need to purchase a 2 inch hitch as well which is not included. The Reese Eclipse 4 Bike Rack, Item # 63124, will come with the basic hardware needed to attach the rack to a 2 inch hitch. It does not include items you need to cable lock the rack. Adapters for women's and children's bikes or alternative frames are also not included. For a 2 inch hitch, I recommend the Draw-Tite Class III Max Frame Receiver Hitch, Item # 75579. This hitch is a confirmed fit for your...
    view full answer...

  • Trailer Hitch Bike Rack for 2017 Honda Ridgeline
  • The Reese Eclipse 4 Bike Rack, # 63124, is a fit for your factory 2 inch hitch receiver on your 2017 Honda Ridgeline. This rack will allow you to carry 1-4 bikes safely and securely. It has some nice features like the anti-rattle hitch bolt and the tilt away feature that allows you to access the bed of your truck. I've attached a video of this hitch on a Ridgeline. I'd recommend a lock for the anti-rattle hitch bolt, like the Pro Series Lock-Tite # PS63100, to secure your rack to...
    view full answer...

  • Which is Better For My Vehicles, The Thule Hitching Post Pro or the Reese Eclipse 4?
  • In this case, I recommend going with the Thule Hitching Post Pro, part # TH943XTR, over the Reese Eclipse 4 Bike Rack, part # 63124 The primary reason is the flexibility of the shank itself. The Hitching Post Pro can convert between 1-1/4" and 2" hitches, giving you the ability to use it on the available hitches for both of your vehicles. Additionally, the added Anti-Sway cradles on the Hitching Post Pro allows you to keep your bikes steadier and have less chance of damaging them...
    view full answer...

  • Trailer Hitch and Bike Rack for 2017 Subaru Forester
  • Yes, trailer hitch # E98839 fits your 2017 Subaru Forester and Reese Eclipse 4 Bike Rack # 63124 is compatible. This is a very good economical option for your Forester and the Eclipse will allow you to carry 4 bikes so long as they do not exceed the 30 lb per bike weight limit. If you are looking for locks to protect your investments you can use Cable Lock # CAB-10 to secure your bikes to the rack and Anti-Rattle Hitch Lock # HE6001 to secure the Eclipse to your hitch. Additionally,...
    view full answer...

  • Height Dimensions of the Reese Eclipse 4 Bike Rack Part # 63124
  • The distance from the top of the shank to the top of the mounting plate on the Reese Eclipse 4 Bike Rack part # 63124 is 35-1/2". I have attached a photo of this for you as well. Please keep in mind that this distance will increase by an inch or so for the last few bikes as the mounting plate is angled. Unfortunately, I do not have any information on the longevity of the frame cradles. If any of your bikes have an alternative frame then you will want to use an adapter bar like the Bike...
    view full answer...

  • 4-Bike Rack for 2014 Toyota Camry
  • There is not an adapter available to allow the Reese Eclipse 4 Bike Rack # 63124 to be used with a 1-1/4" hitch, but there are economical racks available that will work for you. For a hitch, the Draw-Tite # 36540 fits your 2014 Toyota Camry and is a Class II, 1-1/4" hitch and the 4-bike rack I recommend checking out that will work with it is the Swagman Trailhead # S63380. This rack secures your bikes with anti-sway cradles that prevent your bikes from coming into contact with each other...
    view full answer...

  • Hitch Recommendation for 2016 Chrysler Town and Country for Reese Eclipse Bike Rack
  • For your 2016 Chrysler Town and Country the Draw Tite hitch part # 75579 is the best hitch to use for a bike rack. The Reese Eclipse part # 63124 that you mentioned would fit this hitch and work very well together. I attached a review video for this rack on a similar 2014 Town and Country as yours for you to check out as well.
    view full answer...

  • Recommended Anti-Rattle Hitch Lock for 2-Inch Class III Hitch
  • There are more secure options than a standard hitch pin and clip like # C21504 for securing a ball mount or other accessory in a 2-inch hitch. I can offer you options for both stabilizing the installed item and for locking it for theft deterrence. So long as the ball mount is a hollow type like # C45036 you can use Let's Go Aero part # 63232 to both stop play and rattle in the hitch and to lock the ball mount, or any other hollow-shank item such as a bike rack like # 63124. Please...
    view full answer...

  • Trailer Hitch Mount 4-Bike Bike Rack that Wont Interfere with Opening Hatch on a 2010 Honda Odyssey
  • First, it is not recommended on the Reese Eclipse bike rack to tilt it down with the bikes loaded. The rack was not designed for the additional stress. Although you would be able to open the rear hatch with the rack tilted down as shown in the video I have linked. This rack would not be the best option for women's bikes and bikes with alternative frames. This is because the cradles do not rotate to compensate for the slant in those style bikes. You would likely need to use bike adapter...
    view full answer...

  • Trailer Hitch Mount Bike Rack that Will Clear the Spare Tire on a 2003 Jeep Liberty
  • On the trailer hitches that we installed on 2003 Jeep Liberty models the distance from the center of the hitch pin hole back to clear the spare tire measured from 10 inches up to 15 inches. You will need a bike rack that can clear that distance to fit with the spare tire in place. Reese Eclipse bike rack # 63124 measures 8 inches from the center of the hitch pin hole to the back of the upright mast so it would not work. The Thule Hitching Post Pro # TH934XTR measures 13-1/2 inches...
    view full answer...

  • Recommended Trailer Hitch for Keystone Alpine 5th Wheel to use with Bike Rack
  • For a trailer hitch on your 2016 Keystone Alpine 5th Wheel, I recommend the Curt Adjustable Width Trailer Hitch Receiver # 13703. This adjustable hitch can mount to frame widths between 22 and 72 inches and has a maximum tongue weight of 350 pounds, although you will likely be limited by the tongue weight capacity of your trailer. This can either be bolted to the vehicle frame or welded on for a no-drill application. I recommend having a certified professional perform any welding. I have...
    view full answer...

  • Will Reese Eclipse 4 Bike Rack Work with 2016 Subaru Forester
  • The Reese Eclipse 4 Bike Rack # 63124 referenced in your question will work great with the Draw-Tite Class III Trailer Hitch # 75876 installed on your 2016 Subaru Forester. The bike rack is compatible with 2 inch hitch receivers like what the Draw-Tite hitch provides and there will not be any clearance issues with the vehicle's rear bumper. This rack can hold up to 4 bikes with a total weight of 120 pounds and can tilt away to allow for rear cargo access. I recommend adding the Deadbolt...
    view full answer...

  • Will Reese Trailer Hitch Mount Bike Rack Fit a Curt 2 Inch Trailer Hitch on a 2011 Toyota RAV4
  • I have included a link to all of the trailer hitches that are designed to fit your 2011 Toyota RAV4. If you do not see a video specifically on a 2011 for a given custom fit product it just means that we have not had the chance to install that particular product on that particular vehicle. Most custom fit products fit a range of model years and even other vehicles. The most popular hitch for your 2011 RAV4 is Curt hitch # C13149. We do have a video of it on a 2011 and I have linked it...
    view full answer...


Do you have a question about this RV and Camper Bike Rack?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality rv and camper bike racks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv and camper bike rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Joe V
Updated by:
Leah B
Photos by:
Jackie C
Expert Research:
Michael L
Video Edited:
Zack K
Video by:
Andrew K
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Test Fit:
Nicholas E
Video Edited:
Jacob T
Test Fit:
Rick A
Expert Research:
John H
Updated by:
Adele M
Test Fit:
Matthew K
Expert Research:
Brandon M
Expert Research:
Adam R
Video Edited:
Kathleen M
Updated by:
Laura H
Video Edited:
Dustin K
Test Fit:
Cole B
Photos by:
Amber A
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Video Edited:
Sue W
Photos by:
Sam P
Test Fit:
Randy B
Video Edited:
Chris R
Test Fit:
Hayden R
Test Fit:
Joe B
Photos by:
Zach O
Updated by:
Sarah W
Updated by:
Ronnie R
Updated by:
Daron K
Video by:
Zach D
Updated by:
Jason W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.