Vent Cover for Pre-1995 Elixir Trailer Roof Vent - Smoke

Vent Cover for Pre-1995 Elixir Trailer Roof Vent - Smoke

Item # 61635

lowest price pledge

Retail:$23.98

Our Price: $15.38

You Save: 36%
RV Vents and Fans

Orders above $99 qualify for Free Shipping

Shipping Weight: 1.25 lbs

Quantity: 
In Stock
Ventmate RV Vents and Fans - 61635
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Roof Vent
  • Replacement Lid
  • Ventmate
  • 14W x 14L Inch
  • Tinted
  • Continuous Hinge
Lowest Prices for the best rv vents and fans from Ventmate. Vent Cover for Pre-1995 Elixir Trailer Roof Vent - Smoke part number 61635 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (21)
  • Q & A (13)
  • Videos (1)
  • Photos
  • Why etrailer?

Ventmate RV Vents and Fans - 61635


Features:

  • Fits 14" x 14" plastic frame vents for Elixir trailer roof vents manufactured before 1995
  • Easy to install and operate
  • Continuous hinge
  • Smoke color


63118 Vent Mate Lid for Pre '95 Elixir - Smoke







Video of Vent Cover for Pre-1995 Elixir Trailer Roof Vent - Smoke


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Ventmate RV Vents and Fans - Roof Vent - 61635 Review

Today we have the Vent Cover for Pre-1995 Elixir Trailer Roof Vents in smoke finish part number 61635. This vent cover comes in a translucent smoke finish. Its designed to fit 14" by 14" plastic frame vents. It includes a new aluminum bar as well as an aluminum hinge on the back. And that does it for the Vent Cover for Pre-1995 Elixir Trailer Roof Vents in smoke part number 61635.


Customer Reviews

Vent Cover for Pre-1995 Elixir Trailer Roof Vent - Smoke - 61635

Average Customer Rating:  4.6 out of 5 stars   (21 Customer Reviews)


- 61635
by:

Website was set up so I could find the vent covers needed easily. I called to remove doubt I had and it was cleared up professionally. My order was complete and delivered as scheduled. Great fit for vents covers on 2 different types of trailers Thanks for the help and supplying the product 703124



- 61635
by:

So easy to install! Didn't replace old slide bar with the new one provided, just screwed the four original screws into the old slide bar. and that was about it! 699093



- 61635
by:

Perfect replacement for our 1993 Gulf Stream Ultra’s vent covers. I searched the internet for an hour to locate a replacement. Installation was easy, the old covers had aluminum braces on the outside where the screws go holding the track. Reused those braces. 697562



- 61635
by:

Tinted vent covers received really fast and as advertised. Thank you for such quick service. 579375



- 61635
by:

The product was delivered promptly , was exactly what I ordered. I was very happy with the experience. 557258



- 61635
by:

this vent cover was a perfect replacement for my broken one. installation was quick and i received it in record time. it was a great transaction. 549162



- 61635
by:

I am happy you had this old type roof vent cover and at a great price they are getting hard to find thank you. 526391



- 61635
by:

The final result after some custom fitting was great although the cover itself is smaller than the truss brace. This held true wether I used the new trusses provided with the new covers or my old ones. This confirmed that the space provided for the truss on the cover was too small. I ground off 1/8 of an inch from the end off the extruded aluminum truss and the truss then fits and all else works well. I have a bench sander so it was easy for me to grind and fit trusses. Once fitted they are very nice. 448819



- 61635
by:

My Motorhome is a 1986, so the vents were obsolete and could not find replacement covers locally. Universals were not even close. These covers are exactly as the originals, fit perfectly, and were delivered in a very prompt time. Next time I need parts, this will be my first stop. 408534


Comments

Still as new, working just like it should

Steve O - 07/20/2018

41211

- 61635
by:

Easy to install. 315675



- 61635
by:

Vent lid was a direct replacement for my old cracked lids. Came with all necessary installation hardware and arrived quickly. Great value! 267716



- 61635
by:

Good Price. On time shipping. Excellent fit.Would highly recommend. 201040


Comments

Still looks great. No fading or cracking.

Rod F - 06/05/2016

18323

- 61635
by:

Great product. Shipping was fast and company was great. 200281


Comments

I do like them they still work well. They are starting cracking around the edges. I thought they would last at least 5 years but it looks like Im going to have to purchase them again this year.

Marlin - 06/18/2016

18773

- 61635
by:

prodct was good appairently they changed the hinge but with a slight alteration is fine 178569



- 61635
by:

Awesome fast delivery n just what I ordered n the price excelent. Love it was a perfect fit. ?? 159810



- 61635
by:

The vent covers were exactly the ones I needed. They were a perfect replacement. Thank you for your service, fast delivery and always courteous. 105551



- 61635
by:

Fit perfectly! 96863



- 61635
by:

Fit just like the original. Good servi ce. 88820



- 61635
by:

The product is fine, although I have to say I was surprised it was not damaged in shipping, because it was shipped loose in a box with a trailer hitch! 83098



- 61635
by:

just what i ordered they fit and look perfect thank you 69943



- 61635
by:

This cover fit my trailer just fine, it took a bit of grease to get the hinge to slide smoothly into position but it was due to the part on the trailer not the cover. I did get some hairline cracks in it when I placed the crossbar on it so be careful how tight you put the four screws in. I have no complaints about the product itself and the company shipped it rather quickly. 64499


21
21

Ask the Experts about this Ventmate RV Vents and Fans

Do you have a question about this RV Vents and Fan?


  • Replacement Roof Vent Lid for 2017 Rockwood Mini Lite 2506S Travel Trailer
  • We can help you with a replacement lid for the 14 x 14-inch roof vent on your 2017 Rockwood Mini Lite 2506S. Thank you for the photo. There are four hinge types used on the majority of trailer roof vents. Each one is shown in the photo I linked for you. Have a look at your vent's hinge to determine which type you have and then simply click on that type at the top of the page I linked for you. You will then see all color options in that hinge style. Based on your photo I think you...
    view full answer...

  • Will White Replacement Vent Cover Last Longer Than Smoke Colored Cover For Pre-1995 Elixir Roof Vent
  • We offer one metal replacement vent cover. It is part # BV0534-00 but it is designed for a 14-1/4 x 14-1/4 inch vent. The # 61635 and # 61634 are designed for a 14 x 14-inch vent. The 63116 and 61635 are both made of plastic so I don't think there will be a lot of difference in the length of time either replacement lid will last.
    view full answer...

  • Replacement Vent Cover for an Elixir Vent
  • The part numbers you have referenced are numbers for the manufacturer of the vent, Elixir. I do not carry the Elixir vents but I do carry replacement vent covers for Elixir that are made by Ventmate and Ventline. To determine the cover you will want to check the size of the vent cover (14 inches x14 inches, 14-1/4 inches x 14-1/4 inches) and the hinge system that it uses. Since your vent cover says Elixir you will want to look at the Ventmate Vent Cover for Pre-1995 Elixir Trailer Roof...
    view full answer...

  • Replacement Roof Vent Lid for Older Jensen Roof Vent on a 1993 Chevy Van
  • The Vent Cover for Pre-1995 Elixir Trailer Roof Vent # 61635 is actually a replacement for Jensen roof vents. I went out to take some measurements and I was able to confirm that it has an overall 14-1/2" length/width but I wasn't able to measure the center piece because it was boxed up. I did however see that the instructions speak directly to Jensen roof vents just like what you have.
    view full answer...

  • Replacement Vent Lid for an Elixir Vent
  • The part numbers you reference are numbers for the manufacturer of the vent, Elixir. We do not carry the Elixir vents but we do carry replacement vent covers for Elixir made by Ventmate and Ventline. To determine the cover you will want to recheck the size of the vent cover and the hinge system that it uses. The standard sizes are 14 inches x14 inches, 14-1/4 inches x 14-1/4 inches. Since your vent cover says Elixir you'll want to look at the Ventmate Vent Cover for Pre-1995 Elixir Trailer...
    view full answer...

  • Roof Vent Covers for a 1979 Holiday Rambler
  • As long as your trailer is pre-1995 Elixir, then I can guarantee the Vent Cover, part # 61635, will work. I dont have information if they are an exact replacement for a Holiday Rambler, but if you already have Ventline vents on there, I would feel comfortable replacing the cover with the part # 61635.
    view full answer...

  • Replacement Vent Lids for a 1988 Fleetwood Prowler
  • The only way to know for sure is to look at the vent and/or old vent lid to determine which, if any, of the replacement covers we offer will fit. We carry models for 3-point hinges, # 69284. For 4-point hinges we have # 61628 and # 63112. And for continuous hinges # BV0554-01, # BV0554-03, # BV0534-00, # BVD0449-A01, # BVD0449-A03, and # 61635. You might be able to Call Fleetwood with the serial number of the trailer and they might be able to tell you but given the age of the trailer...
    view full answer...

  • Replacement Roof Vent Covers for 2004 Fleetwood Prowler Travel Trailer
  • Since you are missing the original vent lids the best way to find the correct lid is to look at the vent and the hinges to determine which, if any, of the replacement covers we offer will fit. We carry a model for 3-point hinges, # 69284. For 4-point hinges we have # 61628 and # 63112. And for continuous hinges # BV0554-01, # BV0554-03, # BV0534-00, # BVD0449-A01, # BVD0449-A03, and # 61635. Another option is to call Fleetwood with the serial number of the trailer and they might...
    view full answer...

  • Available Replacement RV Roof Vent Lids with Continuous Hinge Design
  • Thank you for the detailed description of the replacement vent lid you need for a motorhome's 14 x 14-inch roof vent that uses a continuous hinge. We offer complete vent assemblies but also just the lids too, and in most hinge styles, including all those shown in the linked photo. All continuous hinge vent lids are displayed on the linked page. You can select from among several styles and colors. For instance, for an Elixir brand vent made before 1995 use # 61635.
    view full answer...

  • Vent Lid Recommendation for Pre 1995 Elixir Roof Vent for Trailer
  • Let me see the picture and I'll be able to tell what cover you'd need.
    view full answer...

  • Replacement Vent Cover for Elixir Trailer Roof Vent
  • When measuring for a compatible replacement vent cover on your camper, you will want to measure the opening that the vent assembly fits in. Typically, a standard size vent will be approximately 14 or 14-1/4 square inches. Looking at the picture that you attached and speaking with my contact at Ventline, it appears that you may have an Elixir Vent on your camper. The VentMate Vent Cover # 61635 fits 14 inch x 14 inch plastic frame vents for Elixir trailer roof vents manufactured before...
    view full answer...

  • Replacement Vent Lid for Pre-1995 Elixir Vent with Post 1995 Elixir Dimensions
  • It actually sounds like you need cover # BV0554-03 which has the continuous hinge and the track for the arm. But I assume that the track for the arm does not match this style. I have linked the replacement covers we have but none of them have all three features you are looking for in one lid: continuous hinge, Pre-1995 arm track, and fit 14-1/2 square vents.
    view full answer...

  • What Does the Vent Cover for Pre-1995 Elixir Trailer Roof Vent # 61635 Look Like
  • Attached to this page (and the linked product page) are some pictures of the Vent Cover for Pre-1995 Elixir Trailer Roof Vent # 61635. This lid is compatible with 14" x 14" roof vents that have the continuous hinge that you can see in both the pictures and the video.
    view full answer...


Do you have a question about this RV Vents and Fan?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality rv vents and fans for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv vents and fan information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.