bing tracking image

Customers compare V2092SP-28 to these similar products

  1. RV Vents and Fans
  2. Ventline
  3. Vent
  4. Roof Vent
  5. No Fan
  6. 14W x 14L Inch
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White

Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White

Item # V2092SP-28
Our Price: $53.12
You Save: 27%
RV Vents and Fans
Shipping Weight: 5 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank. Great Prices for the best rv vents and fans from Ventline. Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White part number V2092SP-28 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (650)
  • Q & A (0)
  • Photos

Ventline RV Vents and Fans - V2092SP-28

  • Vent
  • Roof Vent
  • No Fan
  • 14W x 14L Inch
  • White
  • Ventline
  • Manual Lift
  • 4-1/2 Inch
  • Plastic and Metal

This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank.


  • Roof vent allows fresh air to enter, and heat to escape, while trailer or RV remains locked and secure
  • Simple, hand-operated crank rotates to open and close dome and eliminates the need for wiring
  • Translucent cover allows some light through
  • Aerodynamic, wedge-shaped dome made of durable polypropylene
  • Galvanized steel roof flange won't rust or corrode
  • Snap-out screen is easy to clean
  • Polar White interior trim piece (or garnish) is included
  • Made in the USA


  • Included garnish fits roofs 1-7/8" to 3" thick
    • Garnish leg length (depth): 2-1/8"
    • Garnish color: Polar White
    • Other garnish sizes are available (sold separately)
  • Cover color: white
  • Rough opening size: 14-1/4" wide x 14-1/4" long
  • Vent extends above roof:
    • 4-1/2" Closed
    • 10-3/4" Open
  • 2-Year limited warranty

Note: Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.

V2092-28 roof vent

Installation Instructions

  1. Mark desired location for vent. Be sure to choose a location between roof joists.
  2. Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
  3. Apply sealant to bottom of flange. Be sure to surround each screw hole.
  4. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
  5. Mount to roof with #8 screws.
  6. Attach interior garnish piece with #8 screws.

V2092SP-28 Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White

Customer Satisfaction Score:

Customer Reviews

Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White - V2092SP-28

Average Customer Rating:  4.7 out of 5 stars   (650 Customer Reviews)

This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank.


What I'd like to know is how ETrailer got my Roof Vent stuff to me so quickly. Not only that, but I get a note right after I ordered referencing a prior order (for the same thing...different trailer) and I'm saying to myself, "These folks take customer service to another level." Everything ordered was in the box and delivered intact.


Easy installation and operation.


Great product, perfect product without the handle


This was a great vent for my family's pop up camper that was passed down the family to me. The vent cover in the middle of the camper was broke into peices and was covered up for many years. No damage was down from the rain so I was thankful. This vent is great and It was real simple to install. And works perfectly and is for sure brand new in the box. Note: it did not come with screws, so you will need to get those along with your caulk tape and caulking of your choice. The instructions calls for size #8 screws. I used 1" long self tapping screws which worked perfectly for the job.

Thanks your fast shipping and reasonable prices, which got my camper as good as new now. I will be using you guys from now on, if anymore parts are needed in the future.


this rating is for the service, have not installed the roof vent, the service and ordering process were outstanding, i had the item in hand 3 days after placing the order. Thanks for the quick turn-around, if i need anything else for my trailer you are definitely the first choice for me


Delivery was timely and arrived complete and intact. The Vent dome kit fit perfectly and I was able to install the assembly in a short time with excellent results. I will definitely return to e trailer for future projects.


Good product, easy to install.


Trailer roof vent was of high quality and was self installed with no problems. Very pleased with


Appears well made and easy to install. One of the great things is Etrailer sells repair/replacement parts so you don't have to replace the whole unit if something breaks or wears out. Nice unit and great price


So easy to install. Did it in one half hour.



After ordering the wrong one customer service was awesome and finally installing the correct one, it works great. It was easy to install too.


Fit the old opening just fine. Easy install, I had to install backwards because of the roof slope on my A-Frame trailer.


These were exactly what we were looking for to replace our existing yellow speakers. Perfect fit in our 2006 Kodiak Hybrid. Quick delivery and reasonable price.


Was very pleased with the service and quick response. It got here sooner than promised and have already gotten it installed. It was used in the conversion of an enclosed utility trailer.


Easy to install ( I highly recommend a good quality elastomeric caulk) the dome is a light weight plastic, had I known I would have spent more money for a heavier fiberglass unit.


Everything was great. Loved doing business with you.


Received the vent faster than expected, installed is and work great! Removed the old vent and installed this unit, fits great and the screen is much better than the old one. Great price, fast delivery, installed easily.


Easy installation. Great for daytime light, and ventilation.


everything i ordered fit well with no i ssues


Material could be a bit stronger but does the work! Good bang for the buck


I bought this vent to replace the one in my Pace American cargo trailer. The only alteration needed was to trim 1/2 inch off the inside trim, my roof was thinner. I found butyl tape & sealant at Lowes to complete the job. Vent looks great & I like the knob better than the crank, doesn’t stick down to snag stuff.



1 year later I wouldn’t change a thing, works great, looks great!


I was pleased and surprised when installing the new vent, that it was not only a perfect fit in the opening in the camper roof, but the screw holes in the flange lined up precisely with the holes from the previous unit I had removed! This may be because there is some kind of industry standard on hatch flange layouts, or I just got lucky. But boy, did that make the install simple and fast. I ran out of my Dicor Self-leveling sealant, before getting completely around the unit, but the job is virtually done and the new vent looks great!



Sorry, but the camper has been parked for a long time. But no question, the new vent is fine: no leaks, functions well. Thanks!


Due to packing of shipment, heavy items were put on top of vent and vent plastic was cracked




Order came on time and as promised. Good quality, good price.


Great item when covering a roof mounted vent! Replaced the vent on my enclosed car trailer and this as a higher level of protection. With this MaxAir II you can leave the vent open when warmer.



Like the products as much as before.

Show More Reviews

See what our Experts say about this Ventline RV Vents and Fans

  • Roof Vent Recommendation for 1961 Little Gem Trailer
    The Ventline Roof Vent # V2092SP-28 is the standard size that requires a rough cut opening on the roof of your trailer of 14-1/4 inch by 14-1/4 inch. If you have a 13-3/4 inch square opening you'd need to open yours up a bit to get this to fit.
    view full answer...
  • Recommendation for Trailer Roof Vent with Metal Cover
    I wish we did, but the only replacement covers we offer for the # V2092SP-28 are plastic ones. If this is the vent you have then the only way to get a metal cover would be to replace the entire thing with the part # V2110SP-24.
    view full answer...
  • Will Ventline Non-Powered Trailer Roof Vent - White, # V2092SP-28 Fit an Interstate Cargo Trailer
    The Ventline Non-Powered Trailer Roof Vent - White, # V2092SP-28, will fit an opening in a trailer roof that is 14-1/4 inches square and 1-7/8 inches to 2-3/4 inches thick. If these dimensions match what is currently on your trailer, this vent should fit. Based on the research I did for this model trailer, it seems as though it does use the standard 14-1/4 inch square vent. I have included a link below to all of the vents and vent covers we carry.
    view full answer...
  • Determining Vent Lid/Cover Compatible with 1984 Starcraft Pop-Up Trailer
    There are many vent lid replacement options. The vent lid/cover you need will be dependent on the hinge style and the lift arm style/location. I've attached a photo to help with the hinge style options and I've attached the link to the page to all the options we carry. If you need further assistance, let us know and send a couple photos of the hinge and lift arm.
    view full answer...
    Image 1 for
  • Where to Measure Trailer Roof When Picking Out Replacement Roof Vent
    The hole size that our roof vents are designed to fit is 14 inch by 14 inch. If you measure the opening and get that figure what we have would fit. If you measure just the lid it'd be most likely right around 13-1/4 inch. This size is very popular on trailer roofs. So much so that we rarely ever see anything different. The part # V2092SP-28 is our most popular style of roof vent to fit that opening size.
    view full answer...
  • How to Determine Which Replacement Vent Lid for 2005 Lowe's 6x10 Utility Cargo Trailer
    It sounds like you're just needing a replacement vent lid. If just the existing lid is damaged, you can just replace the lid instead of the entire assembly. In order to determine the correct replacement vent, you'll first need to examine what's left of the old vent cover and the vent itself. Look for any brand name or part numbers. Most roof vents are made to fit an opening that is approximately 14-1/4 x 14-1/4. This size is often referred to as 14 x 14. The old vent in your trailer is...
    view full answer...
  • Replacement Roof Vent Lid for 2007 Haulmark Trailer
    I do not have any information about which particular vent Haulmark used on their trailers, but you can easily determine which replacement lid you need. The easiest way to do this would be to provide me with any manufacturer and model number information you might be able to find. With this information, I can check with the various manufacturers for a replacement lid. If you cannot find any info on the remaining vent, you will need to measure the existing vent. When measuring for a replacement...
    view full answer...
    Image 1 for
  • Replacement Roof Vent Recommendation for 1989 Mallard Sprint
    Most likely your 1989 Mallard Sprint uses a standard RV style roof vent like the Ventline # V2092SP-28 is designed to fit. If the opening for the vent measures right at 14 inch by 14 inch this vent will fit and work well. I attached an install video for this vent for you to check out as well.
    view full answer...
  • Roof Vent for 2005 Gulfstream Sidetrack Caravan
    We do not have a part # I3T131 but I may have a solution for you. Roof vents are fairly universal. The main thing you need to know is the size, and the common standard is 14-1/4 by 14-1/4 inches. Basically, as long as you replace your current vent with one that has the same measurements it will work for you. I've linked our selection of vents for you to take a look at so you can find one that matches what you currently have.
    view full answer...
  • Availability of a Ventline Replacement Trailer Roof Vent Cover
    We have the Vent Cover for Ventline and Post-1995 Elixir Trailer Roof Vents - White - Low Profile, # 63113. It fits 14 inch by 14 inch plastic frame vents.
    view full answer...
  • How to Remove an Old Roof Vent Cover
    There are a few different types of roof vent covers and the type of hinge they have is going to dictate how they are removed/installed and the tools required to do so. If your Haulmark trailer has a roof vent with a continuous hinge then you will most likely need a screwdriver to remove the screen/support arm and then a pair of pliers to slide the hinge out of the track. I have attached an install video on a roof vent with a continuous hinge for you. If you can let me know what type of...
    view full answer...
  • Replacement Roof Vent for 1979 Jayco Pop-Up Tent Trailer
    We do have many types of RV vent items you can see on the linked page including manual and fan-powered models, however, none measures 10 x 10. The vast majority of RV roof vents in use are 14 x 14-inches, like # V2092SP-28, and fit into roof openings that are generally 1/4-inch larger in each dimension, 14-1/4 x 14-1/4. If it happens that you measured the trailer's interior trim ring, or garnish, this could have the 10 x 10 dimension you noted. I know it is more challenging to remove the...
    view full answer...
  • Depth of RV Roof Mount Vent for installing through the roof
    I went out to the warehouse and the thickness of the rough opening in the roof for installing this vent can be from 1-7/8 inches to 3 inches.
    view full answer...
  • Solution for Needing Replacement Circuit Board for V2510 Northern Breeze Roof Vent
    My contact at Ventline confirmed that the issue you're having with your model V2501 Northern Breeze 12V fan is related to the controller circuit board. The switch itself is not the problem. Unfortunately, he advised that replacement circuit boards are no longer available as this item went out of production back in 2009. In this case you'll need to install a new fan assembly to replace the existing unit. The Ventline Ventadome roof vent part # V2092SP-28 that you referenced would be a...
    view full answer...
  • Replacement Trailer Roof Vent for a Ventline VB0568 Roof Vent
    We do not have any vent options with the attachment for the lift on the side, they are all in the middle. But the good news is, with a complete replacement, the attachment point does not have to be the same since the entire vent is being replaced. So the Ventline Ventadome Trailer Roof Vent # V2092SP-28 will fit as a replacement and is as close to the same as your VB0568 that we have available.
    view full answer...
  • Choosing Correct Replacement Roof Vent Lid for Trailer
    When measuring for a replacement vent lid, you will want the outside dimension of the housing that extends through the trailer roof. This dimension is typically just under 14 by 14 inches, which means that the lid you'll need would measure right about 14 x 14, or a tiny bit larger. Closely examine the remaining portion of the vent, looking for a manufacturer name or model number. If you cannot find that information, you can examine the replacement lids we offer (see link) and match them...
    view full answer...
    Image 1 for
  • How to Remove a Broken Roof Vent Dome Cover on a Trailer
    The removal of an old vent cover is usually not very difficult, but the exact process will depend on the brand of the vent. Typically, the first steps are to remove the handle, the screen and, in some cases, the lower or interior trim piece. Next, you will want to determine how the arm is attached to the cover and base. The arms slide along either a plastic or metal track that is attached to the vent cover. The arms are usually held to the vent base and handle with screws, which would...
    view full answer...
  • Ventline Ventadome Trailer Roof Vent Retro Fit to 1974 Travelaire
    The Ventline Ventadome Trailer Roof Vent, # V2092SP-28 is a manual opening vent requiring a 14-1/4" x 14-1/4" opening. Please see the attached product review and installation video for assistance in deciding if this is the best option for your 1974 Travelaire.
    view full answer...
  • Pin Functions and Locations for Vehicle and Trailer Side 7-Way Connectors
    I have included a picture that shows how both a vehicle side and trailer side 7-Way are pinned. Ignore the colors and just look at the functions since, like you said, there isn't a standard color code. I have also included a link to the help article that contains the pictures.
    view full answer...
    Image 1 for Image 2 for
  • Will 14" x 14" Vent Work for 13" x 13" Roof Vent Hole on 1960 Fireball Camper
    It does sound like you have a standard 14" x 14" roof vent on your 1960 Fireball camper. I went out to the warehouse and measured the inside of the Ventline Ventadome Trailer Roof Vent # V2092SP-28 to find that the inside measures about 13-1/4" x 13-1/4" so it would work well for your application. This particular vent is manually operated like what likely originally came on your camper. We do have upgraded vents though that connect to power and utilize fans to help vent the air better....
    view full answer...
  • Installing Trailer Vent # V2092SP-28 on Snowmobile Trailer with 1/8 Inch Thick Roof
    The garnish that is included with the V2092SP-28 is 2-1/8 inches thick, which is the shortest one offered. You can certainly use the vent, but you will have to modify the garnish or use some lumber to make a frame around the hole to take up some of the additional room. Due to the very thin roof, I would suggest making a frame as it would add some stability for the rough opening and provide a strong attachment point for the vent.
    view full answer...
  • Replacement Garnish for a Ventline Trailer Roof Vent
    It sounds like you are talking about the ceiling garnish. I have included a link to the ones that we carry to the right. But they are all 14-1/4 inches square. This is the measurement of the part that fits in the opening though, not the overall width so one of these garnishes is likely to fit if you have a Ventline roof vent.
    view full answer...
  • Can Ventline Roof Vent Be Installed on Pop-Up Camper with Thin Roof
    The roof on your pop-up camper might be a bit thinner than what's on standard travel trailers but the Ventline Ventadome Roof Vent # V2092SP-28 that you referenced does include a garnish that allows it to fit with different thicknesses. With the garnish the vent can fit roofs that are as thin as 1-7/8 inches (or as thick as 3 inches). I simply recommend taking a quick measurement on your roof to make sure this will work well. If your roof is thinner than this then you will just need to...
    view full answer...
    Image 1 for
  • Is The Ventline Ventadome Trailer Roof Vent V2092SP-28 White?
    I was able to confirm that the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White # V2092SP-28 you were looking at is white in color. The # V2094SP-28 has a white lid, but uses a birch white trim which is an off white color. I included videos for both of the products mentioned for you to take a look at.
    view full answer...

Do you have a question about this RV Vents and Fan?

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Raymond P
Written by:
Raymond P
Employee Kathleen M
Updated by:
Kathleen M
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Adam Y
Updated by:
Adam Y
Employee Isabelle B
Updated by:
Isabelle B
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Robert C
Installed by:
Robert C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924