The built-in rain shield on this manual roof vent protects the interior of your RV or camper from rainwater. The 4-speed fan provides efficient airflow inside your RV. Ceiling fan mode circulates air when vent is closed.
Features:
Specs:
Note: Not for use above tubs, showers, or range cooking surfaces.
The MaxxFan Deluxe has a built-in rain shield that, along with the dome, surrounds and encloses the vent opening. The shield blocks rainwater and other precipitation from entering through the vent and damaging the interior of your RV or trailer. This means you can run the fan during any weather without having to worry about the consequences. With the rain shield, there is also no need to install a separate vent cover.
The white dome on the rain shield is constructed of durable high-density polypropylene. When it's closed, the dome provides a seamless, low-profile appearance.
The 12-volt, variable-speed fan operates in manual mode. You can choose from 4 different speeds to increase or reduce the airflow as needed.
This fan also exhausts stale air out of your RV. To enter ceiling fan mode, close the vent while the fan is still running. The fan then circulates the air inside your RV like a ceiling fan.
The fan has a fuse-protected, ball bearing motor that is sealed to keep out dust, dirt, and moisture.
The flush-mounted keypad on the vent enables you to operate the fan, including turning the fan on or off. You can also control the fan speed.
The dome on this roof vent is constructed of durable high-density polyethylene, and it is translucent so that some natural light can shine through. When it's closed, the dome provides a seamless, low-profile appearance that blends into the roof of your RV.
Unlike a dome that has only 1 arm, this manual-lift dome is supported by 2 sturdy arms so that it will not flutter during high winds or while you are driving.
And a manual hand knob is built into the underside of the vent to allow you to open and close the dome. Pull the knob outward, turn it to where you want it, and push it in to lock the dome into place.
This vent has a bug screen that helps keep insects and debris out of your RV. It is secured to the vent with 4 built-in retainer clips. These clips make it easy to remove the screen for cleaning or maintenance. Just rotate the clips, and the screen will pop out.
The MaxxFan Deluxe vent fits standard 14" x 14" openings in the roof of an RV, camper, or enclosed trailer. A white interior trim piece (or garnish), insulated electrical connectors, and hardware are included for installation. The included mounting flange is lined with a rubber weather seal, which helps prevent leaks. Roof sealant (sold separately) is required for installation.
To install, first secure the mounting flange to the roof. Then connect the two wires on the vent to your RV's electrical system. The black wire is for power, and the white wire is for ground. Next insert the vent into the flange and fasten it down using the metal mounting points on the flange. To finish, trim the garnish as needed to fit the thickness of your roof and install it.
Do you have a question about this RV Vents and Fan?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.