See what our Experts say about this Ventline RV Vents and Fans

• Recommended Roof Vent that Can Be Installed Above a Shower
  You technically can use a powered roof vent like the MaxxFan Deluxe Roof Vent # MA00-06401K however it is not recommended because the moisture can ruin the electronics. So for above your shower, I recommend going with a manual roof vent like the Ventline Ventadome Trailer Roof Vent # V2092SP-28. This will do the same thing as the MaxxFan Deluxe Roof vent but is manually operated instead of powered.
  view full answer...
• Replacement Vent Cover for Ventline Roof Vent
  We have several selection for replacement vent cover for Ventline Old-Style Rounded Dome in smoke, # BV0554-03. Or in white # BV0554-01. In wedge shape, white, # BVD0449-A01. In wedge shape, smoke, # BVE0108-03. Rounded dome, white, # BBC0530-01. Rounded dome, blue/grey, # BBC-0530-04. Please note the links to product review videos and installations.
  view full answer...
• Replacement Trailer Roof Vent w/ Fan for a Ventline V2394 Fan
  Hey Stewart! To replace your Ventline V2394 fan, you'll want the Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" - White - Birch Trim item # V2094SP-28. This is almost an identical set up that will drop right into the cutout your V2394 fan occupies now. You'll also want to pick up the Roof Vent Installation Kit item # 344270KITW, which includes everything you need to not only install but reseal your vent. Why are you wanting to replace your Ventline V2394 if...
  view full answer...
• Replacement Vent for a 1975 Wilderness Camper Trailer
  We do have replacement vents and vent covers that you can choose from. It is most likely a 14 x 14 vent as that is the most common, but you will want to measure yours just to make sure. A great 14 x 14 option that looks clean and is functional is the Ventline Ventadome Trailer Roof Vent # V2092SP-28. It comes with a white cover and is operated manually so it is less expensive than an electronic option. I have attached a video of this vent being install on a trailer for you to check out....
  view full answer...
  
• Replacement Screen for Ventline Northern Breeze Vent
  I do have an option for you but the Replacement Bug Screen part # FVK2034-80 is not correct for your Ventline Northern Breeze Vent nor is the correct replacement available as it has been discontinued by the manufacturer. The only option we can offer you is a new unit, the Ventline Ventadome Trailer Roof Vent part # V2092SP-28 or part # V2094SP-30 with fan. These units will however be a direct replacement for the Northern Breeze Vent you have now. The screen is also replaceable using the...
  view full answer...
• Replacement Lid for 14 x 14 Ventline Trailer Roof Vent Model AS13M-V101
  We offer 14 x 14-inch trailer roof vent covers in many colors and styles. Based on your Ventline part number AS13M-V101 you can use either white lid # BV0554-01 or smoke lid # BV0554-03. Both feature a continuous type metal hinge, which is shown in the linked image. So long as this is your hinge type either replacement lid will work fine for you.
  view full answer...
  
• Solution for Needing Replacement Screen for Northern Breeze RV Roof Vent V2525
  The Northern Breeze trailer vent has been discontinued which means the replacement screen you are in need of is not available. While I know it is not exactly what you wanted to hear, the best option available is to replace your Northern Breeze vent. The good news is that these vents fit standard cut outs of roughly 14" x 14" and are economical of you go with the simple manual-crank vent like the Ventline Ventadome Trailer Roof Vent # V2092SP-28.
  view full answer...
• Roof Vent to Install Above Shower
  Since you are needing a vent that sits above your shower you need one that doesn't have power. Roof vents that use electricity, like the MaxxFan Deluxe Roof Vent # MA00-05100K, aren't built to resist the water that would be filtering through if installed above a shower. Because of this I recommend installing the Ventline Ventadome Trailer Roof Vent # V2092SP-28 which operates manually and fits a standard 14" x 14" vent opening. If you would like to leave the vent open when it is raining...
  view full answer...
• Do I Have to Replace the Entire Vent to Add a Hand Crank?
  Hey Jack. You would need to replace your entire bathroom vent if you wanted to add the crank up handle feature. The Ventline Ventadome Trailer Roof Vent item # V2092SP-28 you were looking at has a hand-operated crank that rotates to open and close the dome. It fits a 14-1/4" wide x 14-1/4" long opening. What kind of trailer do you have? You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
  view full answer...
• Replacement Trailer Roof Vent for a Ventline VB0568 Roof Vent
  We do not have any vent options with the attachment for the lift on the side, they are all in the middle. But the good news is, with a complete replacement, the attachment point does not have to be the same since the entire vent is being replaced. So the Ventline Ventadome Trailer Roof Vent # V2092SP-28 will fit as a replacement and is as close to the same as your VB0568 that we have available.
  view full answer...
• Options For Replacing A Lid Cover On A Ventline Northern Breeze BVB0568-01
  Thank you for the pictures. I do have a potential solution for you, but the Ventline northern breeze has been discontinued. We actually used to sell them here. The last one we sold was in 2018. I know this is not what you were hoping to hear, but replacement pats may be near impossible to find. At this point I recommend replacing the entire vent assembly. If you are in need of a new vent, a good replacement is the MaxxFan roof vent # MA00A04301K. This will be pretty similar to what you...
  view full answer...
• Replacement Parts for Vent Line Northern Breeze model V2425
  The Ventline Northern Breeze Roof Vents have been discontinued. We do some parts you are looking for. The Replacement Operator w/ Knob and Screw for Ventline Vent with Metal Dome and Old-Style, Rounded Dome, # BV0115-04 and I suggest the the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White, # BBC0530-01. you can use the Replacement Dome Seal for Ventline Ventadome Trailer Roof Vents, # BVD0455-01.
  view full answer...
• Will a Regular Vent with No Fan Fit in Place of a Ventline Northern Breeze Roof Vent
  Yes, you can replace the Northern Breeze vent with a regular vent with no fan. Both the Ventline Northern Breeze vents and a regular vent with no fan such as # V2092SP-28 fit in the same 14-1/4 inch rough square opening! I have linked a couple of helpful videos on the regular vent for you.
  view full answer...
• Can Blocks be Used to Install Garnish of Ventline Ventadome Trailer Roof Vent # V2092SP-28
  Blocks of wood is exactly what we used to install the Ventline Ventadome Trailer Roof Vent # V2092SP-28 on an enclosed trailer. Although the garnish isn't exactly necessary for the installation, it does help make the installation look nice and gives you some protection from the mounting screws that come through the roof. We have the Installation Kit # 344270KITW available as well which includes mounting screws and sealant. I have linked the installation video I referred to in for you to...
  view full answer...
  
• Replacement For Discontinued Northern Breeze Vent
  The Northern Breeze trailer vent has been discontinued, and as such there are few replacement parts available now, and that includes the screen. While I know it is not exactly what you wanted to hear, the best option available is to replace your Northern Breeze vent. The good news is that these vents fit standard cut outs of roughly 14" x 14" and are economical of you go with the simple manual-crank vent. For that I recommend checking out the Ventline Ventadome Trailer Roof Vent # V2092SP-28. Or...
  view full answer...
  
• Replacement Roof Vent for RV with Northern Breeze VB0568
  Yes we have replacements for the Northern Breeze RV roof vent VB0568 that you have now. For a standard roof vent with a manual lift and no fan we have the # V2092SP-28 and you'd be set.
  view full answer...
• Availability of Replacement Parts for Ventline Rounded Dome Trailer Roof Vent
  The Ventline product you reviewed, part # V2092SP-28, is a complete vent assembly intended for a rough roof opening of 14-1/4 x 14-1/4 inches. It consists of a wedge-shaped white plastic dome attached to a galvanized steel frame with hand-crank assembly, a removable screen, and a white plastic 2-1/8-inch-deep garnish (interior trim ring). Please note that this part requires an installation kit, part # 344270KITW, which consists of mounting hardware and a urethane caulk sealer. If your...
  view full answer...
  
• Replacement Roof Vent Cover for Lid Marked AS-13M-VDO449 ANS Z26 1
  We have had a similar question to this come up and we were able to determine that the number AS-13 M-VDO449 that you listed is stamped on the vent cover part # BVD0449-A01. If you are looking for the entire fan setup and not just the cover you would want the part # V2092SP-28 for a white lid or part # V2092SP-29 for a smoked lid. The smoked lid would allow more light in.
  view full answer...
  
• Is There a Replacement Lid for Ventline Northern Breeze Vent
  The vent you have is a Ventline Northern Breeze, and the replacement lids have been discontinued for these vents. You do have an option if you like, which is to try a universal lid, the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent # MA00-335001. Otherwise, I recommend just replacing the vent altogether, and there are a number of options. For a standard roof vent you can use the Ventline Ventadome Trailer Roof Vent # V2092SP-28 or Ventline E-Z Lift Ventadome Trailer...
  view full answer...
• Solution for Needing Replacement Screen for Northern Breeze Roof Vent
  I do have an option for you but the correct replacement screen is not available as it has been discontinued by the manufacturer. The only option we can offer you is a new unit, the Ventline Ventadome Trailer Roof Vent part # V2092SP-28 or part # V2094SP-30 with fan. These units will however be a direct replacement for the Northern Breeze Vent you have now.
  view full answer...
• Can a Fan be Added to a Ventline Roof Vent
  You may be able to add a fan to your Ventline roof vent without removing it but it all depends on what part number you have. I spoke with my contact at Ventline who said that the VD0433 number you gave me is only for the screen on the vent. If you have the part # V2110SP-24 that has the metal roof then my contact said that there is no way to modify it for a fan. If you have the part # V2092SP-28 then there is a way that you could add a fan. The Replacement 12V DC Motor # BVD0218-00 and...
  view full answer...
• Recommended Roof Vent Upgrade To Replace Broken 12x12 Vent Lid
  I have a replacement option but you are correct that we do not carry any 12x12 vent lids. The 12x12 vent lid is an odd size that is difficult to find replacement lids for so I recommend changing your vent to the more common 14x14 vent like the Ventline Ventadome Trailer Roof Vent # V2092SP-28 that has easy to find replacement parts to make life easier in the future. The Ventline Ventadome # V2092SP-28 has a white lid, but if you prefer a smoke lid you can use # V2092SP-29 Installing...
  view full answer...
• Installing Ventline Ventadome Trailer Roof Vent # V2092SP-28
  The Ventline Ventadome Trailer Roof Vent # V2092SP-28 referenced in your question is designed to mount inside a 14-1/4 inch x 14-1/4 inch opening through the roof using # 8 screws and sealant like what is included in our Installation Kit # CAM25013. These sheet metal screws will go through the existing holes in the vent's mounting flange and through the trailer's roof. You will need to drill through the roof for a proper attachment. I have attached an installation video so you can see...
  view full answer...
• Roof Vent Recommendation for RV with 4 inch Thick Opening
  What you'd want is a roof vent like the Ventline # V2092SP-28 with a taller ceiling garnish part # VA0445-37 which is 5-5/16 inches tall and can be trimmed down to a shorter length appropriate for your ceiling opening.
  view full answer...

Do you have a question about this RV Vents and Fan?