The built-in rain shield on this powered roof vent protects the interior of your RV or camper from rainwater. The reversible, 10-speed fan has a thermostat to regulate airflow inside your RV. Ceiling fan mode circulates air when vent is closed.
Features:
Specs:
Note: Not for use directly above tubs, showers, or range cooking surfaces.
The MaxxFan Deluxe has a built-in rain shield that, along with the dome, surrounds and encloses the vent opening. The shield blocks rainwater and other precipitation from entering through the vent and damaging the interior of your RV or camper. This means you can run the fan during any weather without having to worry about the consequences. With the rain shield, there is also no need to install a separate vent cover.
The smoke dome on the rain shield is constructed of durable high-density polypropylene. When it's closed, the dome provides a seamless, low-profile appearance.
The 12-volt, variable-speed fan has 2 modes of operation: manual and auto. When the fan is in manual mode, you can choose from 10 different speeds to increase or reduce the airflow as needed. Auto mode works in conjunction with the fan's thermostat.
To enter auto mode, press the auto mode button on either the remote control or keypad. Once the fan is in auto mode, the thermostat is activated with a set temperature of 78 degrees F. Pressing the arrow keys on either the remote or keypad changes the set temperature in 1 degree increments. When the thermostat is set, it senses the room temperature and automatically turns the fan on if it is above the set temperature. The fan shuts off when the set temperature has been reached. If the room temperature rises, the fan turns on again. This keeps your RV cool and comfortable and saves you from having to adjust the fan by hand. The auto mode also saves energy by running the fan no more than necessary, especially while you're away or asleep.
This fan is reversible, which means you are able to both exhaust stale air out of your RV and bring fresh air in from the outside. To enter ceiling fan mode, close the vent while the fan is still running. The fan then circulates the air inside your RV like a ceiling fan.
The fan has a fuse-protected, ball bearing motor that is sealed to keep out dust, dirt, and moisture.
The remote control has a built-in LCD screen so that it's easy to see the current settings. The remote enables you to operate the vent and fan from afar, including opening or closing the dome and turning the fan on or off. With the remote, you can also control the fan speed, the direction of the airflow, and the set temperature for the thermostat.
The remote comes with a cradle, which mounts to the wall. When it's not in use, the remote can be stored in the cradle. Hardware and 2 AAA batteries are included. The low-battery indicator located on the top-center area of the screen lets you know when it's time to change the batteries.
Like the remote control, the flush-mounted keypad on the vent allows you to operate the vent, the fan, and the thermostat.
This powered-lift vent opens and closes automatically, which means no hand cranking is needed. And unlike a vent that has only 1 arm, this dome is supported by 2 sturdy arms so that it will stay open during high winds or while you are driving.
And a manual hand knob is built into the underside of the vent to allow you to open and close the dome if your RV loses power.
This vent has a bug screen that helps keep insects and debris out of your RV. It is secured to the vent with 4 built-in retainer clips. These clips make it easy to remove the screen for cleaning or maintenance. Just rotate the clips, and the screen will pop out.
The MaxxFan Deluxe vent fits standard 14" x 14" openings in the roof of an RV, camper, or enclosed trailer. A white interior trim piece (or garnish), insulated electrical connectors, and hardware are included for installation. The included mounting flange is lined with a rubber weather seal, which helps prevent leaks. Roof sealant (sold separately) is required for installation.
To install, first secure the mounting flange to the roof. Then connect the two wires on the vent to your RV's electrical system. The black wire is for power, and the white wire is for ground. Next insert the vent into the flange and fasten it down using the metal mounting points on the flange. To finish, trim the garnish as needed to fit the thickness of your roof and install it.
Do you have a question about this RV Vents and Fan?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.