1. RV Vents and Fans
  2. Camco
  3. Roof Vent
  4. Replacement Lid
  5. 14W x 14L Inch
  6. White
Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge - Polycarbonate - White

Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge - Polycarbonate - White

Item # CAM40160
lowest price pledge
Retail:$38.99
Our Price: $33.93
You Save: 13%
RV Vents and Fans
Orders above $50 qualify for Free Shipping
Shipping Weight: 2 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Replacement lid fits your Jensen RV roof vent with a pin-style hinge. Durable polycarbonate is virtually unbreakable. The translucent white lid lets some light through. Integrated, rust-resistant mounting brackets included. Lowest Prices for the best rv vents and fans from Camco. Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge - Polycarbonate - White part number CAM40160 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (148)
  • Q & A (17)
  • Videos (1)
  • Photos
  • Why etrailer?

Camco RV Vents and Fans - CAM40160

  • Roof Vent
  • Replacement Lid
  • 14W x 14L Inch
  • White
  • Camco
  • 4 Point Hinge

Replacement lid fits your Jensen RV roof vent with a pin-style hinge. Durable polycarbonate is virtually unbreakable. The translucent white lid lets some light through. Integrated, rust-resistant mounting brackets included.


Features:

  • Replacement lid fits Jensen RV roof vent with a pin-style hinge from before 1994
  • Virtually unbreakable polycarbonate won't crack over time
  • Translucent white color lets some light through
  • Preassembled for quick, easy installation
    • Integrated, rust-resistant mounting brackets included


Specs:

  • Fits 14" x 14" Jensen vent with pin-style hinge, pre-1994
  • Lifetime warranty


40160 Polycarbonate Replacement Lid for Pre-1994 Jenson Roof Vent with Pin Hinge for Motor Homes and Enclosed Trailers - White





Video of Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge - Polycarbonate - White

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Camco RV Vents and Fans - Roof Vent - CAM40160 Review

Speaker 1: Today we're taking a look at the replacement lid for the Jensen RV roof vents. This replacement lid fits Jensen RV roof vents with a pin-style hinge from the Ford 1994. The polycarbonate construction is very strong and durable. It is designed so it won't crack over a long period of time. So this cover will hopefully be the last one you have to purchase. It does feature the nice reinforced center bar for added strength and durability.

When it comes to the coloring, it's white in color, and it is designed to where it's somewhat translucent; not all the way, but if the sun is hitting it directly it will let some light through. It's all the way preassembled for quick, easy installation.It does come with the integrated rust-resistant mounting bracket. So those are included. It's designed to fit a 14" by 14" Jensen vent with the pin-style hinge. Again, pre 1994.

The product is covered with a lifetime warranty. That's going to do it for today's look at the replacement lid for Jensen RV roof vents.


Customer Reviews

Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge - Polycarbonate - White - CAM40160

Average Customer Rating:  4.9 out of 5 stars   (148 Customer Reviews)

Replacement lid fits your Jensen RV roof vent with a pin-style hinge. Durable polycarbonate is virtually unbreakable. The translucent white lid lets some light through. Integrated, rust-resistant mounting brackets included.

- CAM40160
by:

These lids fit exactly like the original ones and very easy to change. They seem to be very sturdy and well built.



- CAM40160
by:

The roof vent lids I got are great. They seem to hold heat or cold when you want to better than those other ones. They other ones also cracked and were worthless inside of a year. I got the vent insulators as well. The two work great together for controlling inside temperatures. If I ever have to get covers again for something I will definitely get theses again. The people I worked with when getting them were very helpful and pleasant to deal with. A++++



- CAM40160
by:

The product fits perfectly, and was easy to install. Thank you etrailer.com for the great service and to Jonathon W. for going the extra mile.



- CAM40160
by:

Always fast great service and I like that you have items for older trailers.



- CAM40160
by:

so far still working good



- CAM40162
by:

Review from a similar Vent Lid in RV Vents and Fans


It was very easy to install and it is a lot biffier than the one I replaced.



- CAM40154
by:

Review from a similar Vent Lid in RV Vents and Fans


Easy ordering thanks to website details plus images. Step by step progress from e trailer while preparing order for shipping. Super easy tracking info. Great product. Overall A+ experience again.



- CAM40153
by:

Review from a similar Vent Lid in RV Vents and Fans


The vent cover was great but I passed it on to a neighbor that needed one badly. Thanks for touching base with me. I will need other items soon.



- CAM40153
by:

Review from a similar Vent Lid in RV Vents and Fans


ETrailer has made my life easier many times. Good products, great communication and consistent delivery and status! ETrailer being able to offer pieces that match exactly to my various trailers has been incredibly helpful. Thanks!



- CAM40153
by:

Review from a similar Vent Lid in RV Vents and Fans


Exact-Fit replacement cover for my 1998 Bumper Tow camper arrived when promised, works perfectly and makes my experience buying from etrailer.com 'better than 5 stars'.



- CAM40148
by:

Review from a similar Vent Lid in RV Vents and Fans


Order shipped very quick and was kept up to date on the process and will definitely be ordering from etrailer again



- CAM40155
by:

Review from a similar Vent Lid in RV Vents and Fans


Exactly what I needed to replace a damaged lid on an older motorhome.



- CAM40161
by:

Review from a similar Vent Lid in RV Vents and Fans


Roof vent arrived about a week earlier than expected and was packaged well to prevent damage. The part felt much sturdier than the original equipment vent that it replaced. Installation was quick and easy after watching the video.very pleased with the part and etrailer.



- CAM40147
by:

Review from a similar Vent Lid in RV Vents and Fans


A hard item to find but etrailer inventory was easy to search and I found it. The price was right and the delivery professionally done! Thanks.



- CAM40161
by:

Review from a similar Vent Lid in RV Vents and Fans


After one year, still the same. Easy to install, fits perfectly and is a lot thicker than the original. I still expect this to hold up pretty good given that it bakes in the sun all day long and that’s tough on plastics.



- CAM40156
by:

Review from a similar Vent Lid in RV Vents and Fans


The cover is still there and doing its job



- CAM40153
by:

Review from a similar Vent Lid in RV Vents and Fans


This product is a perfect fit for the original Jensen vent cover. It comes complete with the metal frame that attaches to the crank’s lifting arm. Installation is simple and quick.


Comments
After a year, the product is holding up well. It has not faded from the sun nor has it become brittle as did the OEM part. I am carrying a spare with me as my other vent still has the OEM part and it will likely fail soon.
Michael - 06/21/2020


- CAM40161
by:

Review from a similar Vent Lid in RV Vents and Fans


product is a perfect fit, much better quality than the original


Comments
Still looks like new much better quality than the original.
Charles C - 10/31/2020


- CAM40161
by:

Review from a similar Vent Lid in RV Vents and Fans


Great people to work with will be using more Thanks



- CAM40155
by:

Review from a similar Vent Lid in RV Vents and Fans


etrailer had the best research information as to which vet cover I needed for my 2006 Fleetwood Mallard. They also had a great video on the disassembly and instillation. Ordering was easy and the vent cover arrive in just a few days. Thanks etrailer


Comments
Still working great after one year. No issues
Scott W - 06/24/2017



- CAM40148
by:

Review from a similar Vent Lid in RV Vents and Fans


Fit perfect. ETrailer always helpful in finding the right stuff for my needs. My go to. Very Respectfully Gunny G USMC



- CAM40161
by:

Review from a similar Vent Lid in RV Vents and Fans


These replacement lids are well made, strong, and easy to install. The directions that are printed on the box were most helpful. The vent lids that were on the trailer got smashed by a falling limb from a tree near where it was parked. The web site was very helpful in helping determine the kind of hinge that is on the vents on the trailer.


Comments
The vent lids are still holding up very well.
Roger S - 08/07/2019



- CAM40156
by:

Review from a similar Vent Lid in RV Vents and Fans


very pleased



- CAM40161
by:

Review from a similar Vent Lid in RV Vents and Fans


Was an exact replacement. Much more durable then the oem vent on trailer.



- CAM40161
by:

Review from a similar Vent Lid in RV Vents and Fans


Only thing I regret is I forgot to take pictures!, Otherwise, from ordering to tracking info to order follow-up, etrailer has been one of the best most thought out websites I've visited. The covers I bought are far superior to the original equipment. They arrived well-packaged, in a timely manner, and I got regular updates as my order made it's way to my door. I installed one of my roof vents tonight as soon as I opened the package, and since I watched the video etrailer provided on their website, I knew exactly how to install it. The only pain was that the trailer manufacturer got the hinge of the original vent filled with sealant when they sealed the vent upon installation. It took some careful work with a razor knife to free it and remove it. By the time I actually removed it, all the plastic of the original vent basically crumbled in my hands as I worked on it.. I still have another one to install, so I will take pics, and post again. All in all, I'm absolutely satisfied and impressed with etrailer.com, and super satisfied with the products I purchased. Good job, guys. You are a quality act, absolutely. Thank-you.


27
150
Show More Reviews

Ask the Experts about this Camco RV Vents and Fans

  • Replacement Roof Vent Lid for 2014 Eclipse Evolution X Travel Trailer
    The Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge # CAM40160 may fit, but I can't confirm. The style of vent hinge is the deciding factor on fit as most of the outer dimensions are standard size. The vent hinge can have 4 different styles. I've attached a photo to help you determine the correct style and have linked the page to your options.
    view full answer...
    Image 1 for
  • Replacement Vent Lid for Pre-1994 Jensen Trailer Roof Vent with Pin Style Hinge
    Yes, if your 14 x 14-inch trailer roof vent from your 90s-vintage trailer uses this same hinge style as this Jensen replacement vent lid # CAM40160 then you should be good to go. A new vent lid in a different color might even freshen up the appearance of the trailer. This lid type is specific to Jensen vents made before 1994.
    view full answer...
  • Replacement Vent Lid for a Jensen Roof Vent
    What you have there is a Jensen vent, post 1993. The replacement for it is # 61628. The one you referenced, # CAM40160, will not fit because the hinge configuration is different between the two and fits older model Jensen vents.
    view full answer...
    Image 1 for
  • How to Determine Which Roof Vent Lid Fits on a 2000 Roadtrek 190 Popular
    Roof vent lids are very standardized and generally measure about 14 by 14 inches. If your current vent lid is around the same then you have the same standard sized vent on your 2000 Roadtrek 190 Popular trailer. If you no longer have a lid to measure then check the dimensions of the vent's opening and it should be a little bit less, such as 13 by 13 inches or so. If it is then part # CAM40160 is the correct size. However, you also need to make sure that it matches the same style of...
    view full answer...
    Image 1 for
  • Picking Out Replacement Roof Vent Lid for 2006 Eclipse Attitude Toy Hauler
    You'll have to look at the hinge style of the roof vent you have and compare it to the picture I attached to determine what you have and cover replacement you need. Once you've done that check out the link I attached that has all of the replacements we offer.
    view full answer...
    Image 1 for
  • Does the Replacement Lid for Jensen RV Roof Vent # CAM40160 Include the Pin
    No, the Replacement Lid for Jensen RV Roof Vent # CAM40160 does not include the pin. The brackets that the pin installs into though are already pre assembled onto the cover and have integrated rust-resistant brackets.
    view full answer...
  • Does the Camco Replacement Lit # CAM40160 Only Fit Pre-1994 Trailer Vents
    The pre-1994 that you see in the specs of the Camco Replacement Lit # CAM40160 is more about the style than anything else. It does fit 14" x 14" roof vents that have a 4-point hinge style like you can see in the attached photo. If you don't have a 4-point hinge on your vent then we also have other styles that have a 3-point hinge or continuous hinge which you can choose from. I have attached a link to that selection for you to filter through.
    view full answer...
    Image 1 for
  • Will the Camco Replacement Lid # CAM40160 Fit a 2003 Four Winds 27RL
    As long as your 2003 Four Winds 27RL had a vent cover that had the 4-point hinge and measures 14" x 14" then the Camco Replacement Lid # CAM40160 is exactly what you need. If not you will just need to determine what hinge type you have, whether it is 3-point, 4-point, or continuous as you can see from the attached photo. I have also attached a link to our selection of vent covers for you to filter through if you don't have the 4-point style hinge.
    view full answer...
    Image 1 for
  • Roof Vent Cover Replacment For A 1989 Komfort Motor Home with a 4 pin assembly
    Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
    view full answer...
  • Jensen Vent Cover Fit for 1994 Forest River Wildwood
    The Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge # CAM40160 states it is only for pre-1994 models. Jenson changed their hinge style over the years so if you have a post 2004 vent, you will want # CAM40153. There are other various fits for the hinge style between those years. I've attached a photo on the hinge styles to assist.
    view full answer...
    Image 1 for
  • Can a Replacement Vent Lid Support the Weight of a Cat?
    I feel like there may be a story behind this question. This lid is a durable polycarbonate so it will be structurally able to handle a little bit of weight on it and the dome design surely helps, but I've seen some cats that I think could do some damage to any cover, so I'm a little leery to confirm it's capacity. The manufacturer doesn't test for cats, so I recommend keeping your cat off of the vent cover to ensure a working lid for years to come.
    view full answer...
  • Availability of Vent Cover like Camco Replacement Lid # CAM40160 with a Continuous Hinge
    We do have replacement vent covers that have a continuous hinge like what you are describing. For a similar style to the Camco Replacement Lid # CAM40160 we have the Ventline Replacement Dome # BV0554-01. Both of these options fit a 14" x 14" trailer vent opening and come in white.
    view full answer...
  • Low Profile Vent Cover for Ventline Ventadome
    I wasn't able to find out what vent cover you have or its dimensions from the info you gave, or if you needed a cover or replacement lid. There are flat lids such as the # BV0534-00 and low covers such as the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents # BBC0530-01. I have added a link to our page with each of our replacement lids as well as a link to our page with our selection of vent covers for you to take a look at. If you let me know the dimensions of the cover...
    view full answer...
    Image 1 for
  • Recommendation For Jensen RV Roof Vent With Pin-Style Hinge
    The lids are not manufacturer specific. Based on your photo and your description, I recommend the Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge - Polypropylene - White # CAM40154. The translucent white color lets some light through and the polycarbonate won't crack over time. If you are interested in the polycarbonate, it is a stronger material marketed as unbreakable and is # CAM40160. If you are looking for the smoke colored cover, use # CAM40147.
    view full answer...
    Image 1 for
  • Replacement Bathroom Vent Cover Options for a 2012 Forest River Wildwood X-Lite
    Although I don't know exactly what vent cover you have, the standard size is 14 x 14 so that is most likely what you have. I have attached a link to our selection of roof vent covers for you to filter through. You will just need to choose one that has the same hinge style that your current vent cover has. Among the style are 3 Point, like part # BV0554-01 and 4 Point, like part # CAM40160. I have attached a picture showing the different types so you know what to look for, plus...
    view full answer...
    Image 1 for
  • Replacement Vent Covers for Hengs Old 4 Hinge, Pin Style Vent
    It sounds like you might need vent cover # 63112 which has 4 hinges and is for pre-1995 Jensen 14x14 inch vents. Or you might like # CAM40147 or # CAM40160. These covers were held in with a pin so it should be as simple as taking off the old cover and then reversing the process to install the new one. We do not have access to the old vents so I can't provide a step by step process.
    view full answer...
  • Replacement Vent Lid for Older Jensen Style Vent Opening
    Based on the picture you attached (thank you!) the correct replacement lid for your trailer should be the Camco # CAM40147. This lid, designed for 14 x 14 inch openings like yours, features the Jensen style pin hinges that will attach to the 5 connection points on your existing vent. I like the translucent smoke color on this lid that still allows some light through but we also have this cover available in White with part # CAM40160.
    view full answer...
    Image 1 for

Do you have a question about this RV Vents and Fan?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv vents and fans for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv vents and fan information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Rachelle B
Written by:
Rachelle B
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.