RV shower valve lets you attach a handheld shower set (sold separately) so you can wash up after a long day at the campsite. Vacuum breaker makes sure that your dirty shower water won't flow backward and contaminate your clean water supply.
Features:
Specs:
The vacuum breaker lets you attach a handheld shower set (sold separately) to make cleaning mud and sand off the kids, pets, and shower walls even easier. The vacuum breaker also has an anti-siphon device - a small air hole that drains water back out of the hose to prevent your dirty shower water from contaminating your clean water supply.
To install, use the inlet shanks to drop the new valve and deck plate in place of your existing valve. Then hand-tighten the included mounting nuts against the back of the wall, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Phoenix Faucets, Catalina, RV Shower Valve with the dual lever handles in rubbed bronze finish. Now this Catalina series value will let you upgrade the bathroom shower valve in you RV or camper. If you notice on the bottom, it has this vacuum breaker. This will allow you to attach a hand-held shower set to this faucet. The shower set we do sell separately on our website. And what this vacuum breaker does, it prevents the backflow contamination of your clean water supply.This is a dual handle design with the lever style handles.
And what's nice, they use a quarter turn cartridge stem which enables the faucet to fully turn on and off with just a quarter of a turn. Has a washer-less design so it reduces friction, daily wear for long lasting durability. The whole faucet is a non-metallic ABS plastic construction.On the back here it's a one piece spin welded palm underbody and inlet shank. It has a nice rubbed bronzed finish to it. It is a wall mount, two hole installation design.
The inlet shanks for the hot and cold water have standard male NPSM connections. Does include the deck plate, the two mounting nuts with the rubber washers for installation.Now they due require a tile and tub caulk for installing this but it is not included. A few specs on this faucet. The flow rate is 2.5 gallons per minute. Give you a few dimensions on this.
The overall width with the handles in this position edge to edge is right at 9.5" wide. We turn them down, the height of it from the edge of the handle to the top of the base is going to right at 3 3/4" tall. The depth from the handle to the back of the base is going to be right at 3 1/4" deep. The base itself, width on that, edge to edge is 6 1/4". The depth on it is 2 1/8" deep.
These inlet shanks for the hot and cold water, the distance between them, center to center is a standard 4" measurement and the length on the shanks is right at 1 1/2" long.But that should do it for the review on the Phoenix Faucets Catalina RV Shower Valve with the dual level handles in a rubbed bronze finish.
Great.
Sturdy product.
Perfect ! It looks so much better that the old fashioned one
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.