1. RV Sewer
  2. Valterra
  3. Connectors and Fittings
  4. Sewer Elbow
  5. 1-1/2 Spigot x 1-1/2 In Hub
Valterra Street DWV Fitting for RV Sewer System - 90 Degree - 1-1/2" Spigot to 1-1/2" Hub

Valterra Street DWV Fitting for RV Sewer System - 90 Degree - 1-1/2" Spigot to 1-1/2" Hub

Item # D50-2880
lowest price pledge
Retail:$22.84
Our Price: $2.88
You Save: 87%
RV Sewer
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.17 lbs
Quantity: 
In Stock
Valterra Street DWV Fitting for RV Sewer System - 90 Degree - 1-1/2" Spigot to 1-1/2" Hub Sewer Elbow D50-2880
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

This street elbow connects (2) 1-1/2" diameter sewer pipes in your RV or motor home. Elbow changes the direction of waste flow. Simply slide the pipes into either side of the elbow and secure with ABS solvent bond (A05-0303 - sold separately). Lowest Prices for the best rv sewer from Valterra. Valterra Street DWV Fitting for RV Sewer System - 90 Degree - 1-1/2" Spigot to 1-1/2" Hub part number D50-2880 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (7)
  • Q & A (2)
  • Videos (2)
  • Photos
  • Why etrailer?

Valterra RV Sewer - D50-2880

  • Connectors and Fittings
  • Sewer Elbow
  • Valterra
  • 1-1/2 Spigot x 1-1/2 In Hub

This street elbow connects (2) 1-1/2" diameter sewer pipes in your RV or motor home. Elbow changes the direction of waste flow. Simply slide the pipes into either side of the elbow and secure with ABS solvent bond (A05-0303 - sold separately).


Features:

  • DWV street elbow connects 2 sewer pipes that move waste outside of your RV or motorhome
    • Changes the direction of waste flow
    • Works with 1-1/2" diameter pipes
  • Simple installation
    • Slide pipe into hub side of elbow
    • Slide pipe onto spigot side of elbow
    • Solvent bond with ABS solvent cement (A05-0303 - sold separately)
  • Sturdy ABS plastic construction
  • IAPMO listed as meeting or exceeding:
    • ASTM-D2661-2011
    • CSA B181.1-2011


Specs:

  • Hub diameter:
    • Internal: 1-7/8"
  • Spigot diameter:
    • External: 2-1/4"
  • 1-Year warranty


D50-2880 Valterra DWV 90-Degree Street Elbow Fitting for Motorhome Plumbing System - 1-1/2" Spigot x Hub





Video of Valterra Street DWV Fitting for RV Sewer System - 90 Degree - 1-1/2" Spigot to 1-1/2" Hub

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Valterra RV Sewer System Elbow DWV Fitting Review and Installation

Hi there, RV-ers. Today we're going to be taking a look at Valterra's line of ABS elbow fittings. We're here underneath our trailer where we needed to reroute our pipe around our new suspension system. And we're going to be using these elbows to do that rerouting. These elbows are going to be great for any rerouting like we're going to be doing here or if you have any damaged pipe that you need to replace.These elbows come in 90 degrees or 45 degrees. And with the double female one, you can get that in a slightly shorter length for a sharper turn.

These are available in either inch and a half or three inches. Typically the inch and a half is for gray water and the three is for your black water. We're going to be using the inch and a half today. And we've already cut our pipe here. We've made sure to cut it as clean and as square as possible.

And you want to remove any burrs. Just use your hand to remove those.You could also hit it with a piece of sandpaper if they're really rough and you can't knock them off. Once you've got the area you're going to be working with set up, we can go ahead and clean the area. We're just going to use some alcohol. And we want to clean both ends of the pipe we're going to be working with.

Make sure that's clear of any debris. And we also want to do the inside of our pipe.Now that we've got everything clean, we can open up our glue. We're going to be using ABS adhesive, which you can get here at etrailer.com because this is ABS material here, both our pipe and our elbows are. If you are doing some repairs or rerouting, you will likely need some pipe as well. You can get ABS pipe at an RV store, because it is ABS and it needs to be ABS in order to properly seal with the rest of your system.

ABS is also a very durable plastic, so it's perfect for out here in the elements.We'll then take our adhesive. We're going to smear some on the inside of our fitting and we also want to smear some on the outside of our pipe that we're going to be attaching it to. We'll try to get it all the way around. Once you've got it on both sides, while it's still wet, we're going to take the two pieces and we're going to push them together. Now at this point you would want to hold them together until it dries. It does take about three minutes to dry, but since we're going to need to go bring another elbow back into this piece, we're going to make that attachment here as well.I'm going to hurry up and get this side done while everything's wet, so it'll be a little bit easier to maneuver it all. We need to make sure we're doing both ends of each piece. And this one's female, this one's male, so they're going to fit together. We can go ahead and line those up and get them all pushed together.And then while we got it all together, we want to just hold it together. And we're just going to hold it here for a couple of minutes until it dries. It does take about three minutes to get to the point where it is solid and handleable. We're just going to hold it until that point. Now, if your pipes are already tightly pushed together, you don't need to hold it together, but if they're not, then you're just going to want to hold it and tough it out. And that completes our look at Valterra's line of ABS elbow fittings.


Customer Reviews

Valterra Street DWV Fitting for RV Sewer System - 90 Degree - 1-1/2" Spigot to 1-1/2" Hub - D50-2880

Average Customer Rating:  4.9 out of 5 stars   (7 Customer Reviews)

This street elbow connects (2) 1-1/2" diameter sewer pipes in your RV or motor home. Elbow changes the direction of waste flow. Simply slide the pipes into either side of the elbow and secure with ABS solvent bond (A05-0303 - sold separately).

- D50-2880
by:

Great service. Thank You. 830124



- D50-2880
by:

I bought these parts to replace a poorly done replacement on my 2015 Thor Axis. Don't know why the valve set was replaced by the previous owner, but I intend to do a much better job. 837421



- D50-2880
by:

etrailer.com is a must for anyone that has a RV or camper! Their website is very easy to navigate no matter what you are looking for. I have used this site several times and each time my order was delivered perfectly. 811938



- D50-2880
by:

product as ordered fast shipping good communication little trouble processing my card but once past that all went great thanks 651897



- D50-2880
by:

Product got here on time, as predicted. Installation was very straightforward. 509093



- D50-2880
by:

I had a little mishap this past winter and didn't do a very good job of winterizing my RV and ended up with busted grey water drain pipes. After checking at the local big-box hardware store (parts not available) and a well-known camping retailer ($$$$$) I logged onto etrailer and, "voila" ...there's what I need to do the repairs. After a short conversation with George J. to confirm they were the correct parts I placed my order and even with "economy shipping" my parts were here and installed in about a week without breaking the bank. etrailer always seems to have the right product at the right price and very fast shipping! 497064



- D50-2880
by:

I had to replumb my waste tanks on my LQ horse trailer. I changed from two outlets (1 for each tank) to one with the 1-1/2" on the grey water tank. This was the perfect fitting for the job. 456640


7
7

Ask the Experts about this Valterra RV Sewer

Do you have a question about this RV Sewer?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv sewer for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv sewer information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video Edited:
Jacob T
Video by:
Dustin K
Installed by:
Cole B
Installed by:
David F
Written by:
Amy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.