LaSalle Bristol ABS Solvent Cement - Black - 1/2 Pint

Ask the Experts about this LaSalle Bristol RV Sewer

• Options For A Black Tank Leaking Near The Discharge And Dump Valve
  Using PVC (white pipe) between ABS fittings (black) is not usually an optimal setup on a trailer because of the movement during transport and colder temperatures can cause PVC to break more easily. The Oatey Purple is a PVC primer and not a glue so it wouldn't adhere correctly. Using a green transition glue as well as the purple primer on the PVC pipe could have worked however. Ideally they should have used black ABS pipe between the fittings and used ABS cement like LaSalle Bristol...
  view full answer...
• Is There a Specific Length of Cable Needed For Spigot to Hub Black Water Valve
  There actually isn't any way for us to know what length of cable you need when replacing the black water valve on your 2018 Montana Legacy 3130RE so you would need to either take some measurements or make an educated guess. The good news is there are plenty of options for length: - LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub - 36" Cable # 34466N4AB36GM - 48" Cable # 34466N4AB48GMA - 72" Cable # 34466N4AB72GMA - 96" Cable # 34466N4AB96GMA - 120"...
  view full answer...
• Will LaSalle Bristol RV Sewer Termination Adapter Connect to 3" PVC Pipe
  The LaSalle Bristol RV Sewer Termination Adapter # 34466V293B3S is designed to slide into a larger hub like what you see on the end of # T1028 and secured using ABS Solvent Cement # 3447530889. The inner diameter on the hub should be about 3-1/2 inches. If this is what is on the PVC pipe that you mentioned then it will work great. I don't recommend connecting it directly to another 3 inch diameter PVC pipe though, as this might not allow for the best connection even when using a healthy...
  view full answer...
• Adding a Blade Valve to the end of my Tanks Dump Plumbing
  While there isn't an adapter to go directly between the Valterra Waste Valve for RV Black Water Tank part # T50A can be added on in place of your current 3" lug cap in place now. Simply cut it off and attach this one using the LaSalle Bristol ABS Solvent Cement part # 3447530889. This will give you the valve in place to keep the stuff off of your hands. The Valterra Bladex Waste Valve Body for RV Black Water Tank part # T1003VPM you looked at can be used to replace the existing valves...
  view full answer...
• Compatibility of Valterra RV Sewer Fittings with Lasalle Bristol Valve
  The Valterra RV Sewer Spigot with Flange - 3" # T1006 will be compatible with LaSalle Bristol Valves. This has the standard mounting holes 3-3/4 inches apart on center. Then you will simply use the solvent cement like # A05-0303 or # 3447530889 to bond the spigot to your tubing
  view full answer...
• How Do RV Sewer Valves Attach to RV Sewer Lines
  RV sewer valves like the Bristol part # 34466NDHR19AAA that you referenced install with ABS solvent like part # 3447530889.
  view full answer...
• What Type of Connection is Rigid RV Sewer Pipe # F02-2104 Designed to Make
  The Valterra Coupling for Rigid RV Sewer Pipe # F02-2104 is designed for attaching 3 inch ABS style pipes. The larger end is for attaching to a schedule 40 style ABS pipe and the smaller end for attaching to a thin walled style pipe. When making this attachment you do need to use ABS solvent cement like the part # 3447530889.
  view full answer...
• Will the Bristol Double RV Waste Valve Fit on a 1996 Fleetwood Montana Tioga
  As long as you've got a 3" black water pipe and 1-1/2" grey water pipe, you'll be able to use the Bristol Double RV Waste Valve # 34466ND13BAR on your 1996 Fleetwood Montana Tioga. We don't have a database that tells us what will fit on which coach, but these are the most commonly used pipe sizes for these waste pipes so they're going to fit on most coaches. I do recommend measuring your existing pipes to confirm fitment. In order to install this waste valve you will need ABS cement...
  view full answer...
• Will Valterra Sewer Elbow Work with LaSalle Bristol Valve?
  If your LaSalle-Bristol valve is similar to part # 34466N3AR and has a 3" flange diameter, the Valterra RV Sewer Elbow # T1035 will work for you. The brand isn't so much important as finding the correct sized fitting. You'll need some ABS solvent like # 3447530889 to make sure there is a secure connection. If your LaSalle Bristol valve has a different diameter, let me know what size and I can recommend an alternate replacement
  view full answer...
• Troubleshooting a Stuck LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank
  You can try removing the screw, but I don't believe that's the issue. It sounds like your cable might be broken or the actual valve has just locked up or "frozen". There is currently not a replacement cable available for the LaSalle Bristol Waste Valves. You may be able to spray it down with some lubricating grease or even a cooking spray like Pam to try to see if that might allow it to loosen itself up. If there are 4 screws holding the front hub onto the valve as you can see in the...
  view full answer...
• Replacement 3 inch and 1.5 inch Valve for Winnebago Spyder
  The Bristol RV Waste Valve # 34466N3AR will fit the setup you sent in a picture of. Only thing else you'll need is ABS Solvent part # 3447530889 and you'd be set. We do ship to Canada.
  view full answer...
• Lasalle Bristol Utopia TurboVent RV Air Admittance Valve Installation
  Looking at your photo, it looks like the threaded piece of 4" pipe that comes with the LaSalle Bristol Utopia TurboVent RV Air part # 3447425011AAVABS is either the same length or very close to what you have cemented with a solvent cement like part # 3447530889 into the ventilation pipe on your setup. The TurboVent fits 1-1/2" diameter vent pipe. I recommend to replace both pieces by removing the old pipe and cheater vent from the vertical pipe and lightly coating the outside of the...
  view full answer...
• Adapter for 3 RV Gray Water Tank Opening to 1-1/2 Pipe and Waste Valve
  From what I can gather it sounds to me like you need the Valterra Eccentric Tank Reducer - RV Gray Water - 3" Spigot to 1-1/2" Hub # T1041-1. The 3" Spigot mounts directly in the gray water tank outlet while the 1-1/2" Hub slides over sewer pipe. Then for a 1-1/2" diameter gray-water sewer pipe we have the LaSalle Bristol Cable-Actuated RV Waste Valve for Gray Water Tank. This is valve is available in with cables that are numerous lengths, which I'll list for you so you can choose the...
  view full answer...
• What Normally Seals RV Sewer Pipes
  When replacing RV sewer lines you have to cut them totally off since the ABS cement is a permanent plastic weld. Then when you go to make new connections you end up having to replace anything that can't be separated. Or you can use adapters to fit into or over the old pipes and use solvent to make the connection. For solvent we have the part # 3447530889.
  view full answer...
• Bristol Double RV Waste Valve Elbow for 2006 Forest River Surveyor
  The Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug # 34466ND13AAR is made to fit 3 inch black water pipe and 1-1/2 inch gray water pipe. If you already have the valve face plate on your black water line this will connect to it and then on the capped gray water line you can simply use the included adapter with valve flange and the ABS solvent cement # 3447530889.
  view full answer...

Do you have a question about this RV Sewer?