Prest-O-Fit RV Sewer Hose w/ 3" Fitting and 3-in-1 Elbow Adapter - 20' Long

Video Transcript for Let’s Check Out the Prest-O-Fit RV Sewer Hose w/ 3" Fitting and 3-in-1 Elbow Adapter

What's up everybody it's AJ with E-Trade.com. Today, we're going to be checking out a sewer hose kit from Presto fit. So you're going to get all of this and this one kit, you're gonna get two sewer hoses that are each 10 foot long and a connector. So if you need to go a little bit further, you can connect them together and also get ends for the dump station and your rig side of things. Let's check it out. Now, we're going to kind of go in the order of, as we set things up.

So I put my seal in here for those things that it's good to have and some RV sites just require you to have it. So it doesn't hurt to get that and put that down in the dump station. Now we're going to add our elbow for the dump station. So just push that down in there, and that just keeps it sealed so that no liquid or any gases come out while you're using the dump station. Next we're going to attach our first hose.

Now this is what the Presto fit here is all about, is pushing on friction to fit and that's done and connected. I really like that. It's super easy to use their system, and that's why you get their accessories and their hose. It all works together nicely. This elbow is going to be at a 90 degree angle.

So that's going to take stress off the hose here and just help you out and making this dump way easier. At the center of the sewer hose is here. You see that we don't have quite enough length of meeting our rig side here. So we're just gonna use the extension. So it's whether you can just push that in just like everything else in Presto fit, on both ends.

And now the hoses are connected. Now we're on the rig side and we're going to pop this cap off and put our bayonet fitting. Now, before I do that, you've got to point out that it's got the X seal on there too. So that's going to help as it goes up in there and make sure no liquid or gas gets out. And it's just the extra protection you get. Goes right into place there. And then the Presto fit, once again, another nice thing they come with, these end caps. You can just kind of push them down into there. And that way, when you go to store it, you put these on both end. If there is anything left in there, it won't drain out everywhere in your basement. I really liked this kit. There are just a few recommendations just to make it a little bit better. One would be the sewer hose stand. You can see underneath the sewer hose. That's just going to help keep it up and off the ground. That way, if you have obstacles, you can go around those too, but really to keep that gravity doing this thing, to make it very easy and kind of streamline the whole process. Another thing would be a clear elbow for this end, that goes on the rig side. So there'll be an elbow. Not only is it going to save your sewer hose because it's going to come down to that 90 degree angle. It's not going to put a bunch of stress on the hose like this one coming straight out kind of does, but it's also going to be clear. So you can be a little bit further back as it's doing its thing, as you're dumping it. You can see clearly through that window that, Hey, it's done, or it's still going. I can, don't have to shut it off yet. It just makes it easier. And no gas works just being like, okay, it's done. Shut it off. You're done with this process overall. I think it's a complete kit. The few additions aside, it doesn't come with any flop, which is important. Some of the other kids we have, I wasn't really impressed with it. It just came with extra stuff that I didn't ever use or didn't need this one. I liked the Presto fit system too, all the accessories go on really easily and you can take it apart to clean it. I really dig it. Thanks for hanging out. And I hope this helps..