Sanitary tee connects to black-water and gray-water waste valves combining them into 1 pipe. 3" Rotating flange connects to black-water valve. 2" and 1-1/2" Hubs slide onto gray-water waste pipes. Hose connects to 3" lug fitting.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're going to be taking a look at the double RV sanitary T from Valterra. The sanitary T is part of your RV's sewer system. This connects to both the black water and the gray water waste valves to combine them into one pipe. It does have the T configuration. On this side, we're going to have the 3" rotating flange that bolts onto your RV's black water waste valve. Hardware to do that not included.
Then, you're going to have two hubs. These are designed for your gray water waste pipes. We do recommend using ABS solvent cement for installation. That is sold separately and available at etrailer.com. You can pick some of that up, if you don't already have some.
Right here's going to be the 3" lug fitting as the four-pin design. That allows you to connect to bayonet fitting on the sewer hose. Also, a bayonet style cap covers the lug fitting when not in use. That's sold separately and available at etrailer.com also.It's made from a durable plastic construction. It's black in color.
We're just going to go over the measurements of each fitting. The outer diameter, right here, measures 3 1/2". Outer diameter, here, on this connection. That measures about 3 3/16" to 3 1/4". On this one, inner diameter, 1 7/8" to 1 15/16".
On this one, inner diameter is 2 3/8". That's going to do it for today's look at the double RV sanitary T from Valterra.
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
Sanitary tee connects to black-water and gray-water waste valves combining them into 1 pipe. 3" Rotating flange connects to black-water valve. 2" and 1-1/2" Hubs slide onto gray-water waste pipes. Hose connects to 3" lug fitting.This is an outstanding fitting! I have 2 gray Waters at opposite sides of the main 3" exit, and this is a great answer. I put separate 1-1/2" valves just before the Tee (one side of the T required a bushing), so this was a great solution for a tight space! thanks etrailer!
Do you have a question about this RV Sewer Hose Fitting?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.