16' LED light strip illuminates an area with bright white light. 2 Toggle switches control power for multiple applcations. Cut-to-fit LED strips have a durable weatherproof casing. Peel-and-stick installation with 3M adhesive backing.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the 16 foot long, 12 volt, weatherproof LED light strip with on and off switches, and in daylight white color. Now this is a 16 foot long LED light strip. It has 300 LED's on it, provides flexible lighting in indoor/outdoor spaces. You can add awning, decorative or supplemental light for safety and security, and even extend outdoor activity time.Use anywhere you need light, like on your awnings, steps, cabinets, storage lockers. It comes with the two on and off switches to provide a convenient control over lighting for multiple applications. On the lighting strip itself, it has weatherproof exterior to protect the LED's against the elements, and it is a very simple installation.
There's no drilling required.On the back of the LED strip, it uses a 3M adhesive backing, so you can just cut it to your desired length for your application, and then mount it with the peel and stick 3M adhesive backing. They do even include this little packet of the 3M adhesion primer that you want to put down before you attach the tape to it.This will hard wire to any 12 volt power source, or you can use a 110 volt connector that we do sell separately on our website, if you want to use it to plug into an AC outlet, and that's part number DG52691PV. A few specs on this again. The light type is daylight white. Overall length on the strip is 16 feet.It uses a diode type of a 50/50 surface mount, and there's 300 diodes on the strip, so it gives you enough wattage equivalent of about 360 watt incandescent bulbs.
Amperage on it is 2.5 amps, so what I'm going to do is hook up one of these switches to 12 volt power, and we'll turn off the lights just to show you how bright the light is, and the color of the light. So we'll go ahead and take one of these. We'll go ahead and hook up our 12 volt power.So we got that all hooked up there. Now we'll just go ahead and plug this in, and once it's plugged in and see just turn on your switch, and you get your light. We'll go ahead and turn off the overhead lights, and again we'll go ahead and turn on, and you can see the whole strip is wound on this reel.
You can just unwind it and get a very bright daylight white color. Unwind as much as you need, or if you need the whole 16 feet, you can do that. And then you've got your on and off switch right here. And turn back on overhead lights. And we'll go ahead and disconnect it.That should do it for the review on the 16 foot long, 12 volt, weatherproof LED light strip with the on and off switches, and the daylight white color..
Average Customer Rating: 3.7 out of 5 stars (3 Customer Reviews)
16' LED light strip illuminates an area with bright white light. 2 Toggle switches control power for multiple applcations. Cut-to-fit LED strips have a durable weatherproof casing. Peel-and-stick installation with 3M adhesive backing.Received the led strip lights. Have not put them up as they were ordered as a gift for out son and daughter-in-law for their living quarter horse trailer. Will let you know how they turn out.
lights are bright, but backing sticker is awful. lights fell off after first temp change. needed to buy another adhesive and remount.
Perfect for what I needed.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.