2-5/16" x 2-5/16". LED security light illuminates your RV's exterior with what white light to deter unwanted guests. Surface mount - hardware not included. 2-Wire pigtail.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this Surface Mount LED RV security light with a motion detector and a nice warm white color. Now this LED security light will help illuminate your RV's exterior with a nice warm white light, to help prevent any unwanted guest. Has a motion detector that will activate the light when it detects movement. Does use LEDs, which make great replacements for incandescent lights.
They'll last 50 times longer. And they're more efficient because they provide better light with less power output. And there's no bulbs to replace or brittle filaments to break. Does use a white lens over wide LEDs. And this is compatible with the 12 volt DC system.It is designed to mount on the surface of the trailer.
Now the hardwood install, this is not included. If you notice it has the 2-wire pigtails here, includes a black power wire and the white ground wire and the lead length of those wires is about six and a quarter inches. A few specs on this light. Again, the light type is warm white. Color temperature is 3,500 Calvin.
Voltage 12 volts, wattage .6 watts. Last thing I want to do is give you some dimensions and then we're going to hook it up to some power just to show you how bright the light is. So if we do the overall width of it, it's going to be right at two and a half inches. Height of it, is also going to be right at two and a half inches tall. The depth of it is going to be right at about 7/16 inches deep.
So what we're going to do is go ahead and hook some. Take our white ground wire, hook that up. Take our black power wire and hook that up.And we'll go ahead and turn on the power. And you can see the light comes on. Just to show you how bright it is. Actually the light went off, but the motion sensor's this round portion right here in the front. So basically if there's motion in front of it, it would turn the light on. And the light does stay on for quite a while. And right down there, you can see how bright a light it is. When it's mounted it gives off a wide range of light. Go ahead and turn back on the overhead lights. Turn back off the power.But that should do it for the review on the surface Mount LED RV Security Light with the motion detector and the warm white color.
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
2-5/16" x 2-5/16". LED security light illuminates your RV's exterior with what white light to deter unwanted guests. Surface mount - hardware not included. 2-Wire pigtail.I purchased this Motion Detector light to mount behind the door of the control panel in our 5th wheel (Panel that contains light switched, tank level indicators, slide switches, etc). When entering the 5th wheel after dark, opening the control panel door to turn on the interior lights, I could not see the switches. The motion detector light was exactly what I needed to remedy this issue. Thanks etrailer!
Our RV came with a dim entrance stairwell light that was either on or off. We ordered a more expensive one with motion detection elsewhere, but it was way too bright and itcame on even in day light. This light is perfect ! And a breeze to install.
Light works perfectly! It was an exact match to my step light in my 2020 Jayco North Point 377RLBH
Arrived early haven’t installed it yet. Hope it works as advertised!
Great product, fast service!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.