1. RV Lighting
  2. Command Electronics
  3. Exterior Light
  4. Porch Light
  5. Utility Light
  6. LED Light
LED RV Utility Light with Switch - Surface Mount - 4 Diodes - Wedge Base - Clear Lens

LED RV Utility Light with Switch - Surface Mount - 4 Diodes - Wedge Base - Clear Lens

Item # 328-K-0054BS
lowest price pledge
Our Price: $31.67
RV Lighting
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.27 lbs
Quantity: 
In Stock
Command Electronics Exterior Light - 328-K-0054BS
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
7-1/4" x 2-1/4" Oval. LED utility light illuminates your trailer or RV's exterior at a downward angle. Includes on/off switch. Durable polycarbonate base and screw-on lens. Surface mount - hardware not included. 2-Wire pigtail. Lowest Prices for the best rv lighting from Command Electronics. LED RV Utility Light with Switch - Surface Mount - 4 Diodes - Wedge Base - Clear Lens part number 328-K-0054BS can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (4)
  • Q & A (2)
  • Videos (1)
  • Photos
  • Why etrailer?

Command Electronics RV Lighting - 328-K-0054BS

  • Exterior Light
  • Porch Light
  • Utility Light
  • LED Light
  • 12V
  • Surface Mount
  • 7L x 2W Inch
  • Black
  • Command Electronics

7-1/4" x 2-1/4" Oval. LED utility light illuminates your trailer or RV's exterior at a downward angle. Includes on/off switch. Durable polycarbonate base and screw-on lens. Surface mount - hardware not included. 2-Wire pigtail.


Features:

  • Oval LED utility light illuminates your trailer or RV's exterior with bright white light at a downward angle
    • Can also be used as a hitch or task light
  • Simple operation with on/off switch
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide better light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable black polycarbonate housing
  • Clear screw-on lens with white LEDs
  • Compatible with 12V DC systems
  • Mounts on surface of trailer - no cutouts required
    • Hardware not included for lens mounting or light installation
  • 2-Wire pigtail includes power lead and ground wire
  • Made in the USA


Specs:

  • Base dimensions: 7-1/4" long x 2-1/4" tall x 2" deep
    • Lens dimensions: 6" long x 1-1/4" tall x 7/8" deep
  • Distance between mounting holes (center on center): 4-3/4"
  • Lumen output: 4,000
  • Diodes: 4
  • Wire length: 6"
  • 1-Year limited warranty


Command Electronics K-0054BS LED RV Porch, Utility, Ramp Light with Switch Measurements

Surface-Mount Light

Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.



K-0054BS Command Electronics LED RV Porch/Utility/Ramp Light with Switch - Oval - Black Trim - Wedge Base - Clear Lens





Video of LED RV Utility Light with Switch - Surface Mount - 4 Diodes - Wedge Base - Clear Lens

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Command Electronics LED RV Utility Light Review and Installation

Randy: What's up everybody Randy, here at etrailer. Today we're taking a look at the Command RV or utility trailer utility light. As you can see, we've got it mounted here. These offer a wedged base. So they're designed for higher mount applications. Get them mounted up there higher.

They're going to project light down either in your work area or your sitting area if you're out camping.There are two styles. This is a direct connect. So that one you want to use when you have a switch already inside of your trailer or your camper. This one would be perfect for mounting pretty much anywhere. You can see it's got a switch on the top there.

Completely waterproof, which it's going to be exposed to the elements so that's important. And we can just switch that on and off. So regardless of the type setup you have, you can use one of these lights to, as you can see, they give off a great deal of light. They've each got four LEDs there. It's a clear lens so it's a bright white light.We've turned the lights off here in the studio and got some pictures for you to look at so you can see exactly how bright it is, but overall, in this style of light, it's about as bright as I've seen.

Of course, you could get some of the heavier duty square or round work lights that have a higher lumen output than these, but overall for a nice small compact light like that, it's very bright.And here's a good look at it when we have it installed. And you can see how that base is angled out. Without that light on, you can see it a little bit better. And it comes out and it's just about the perfect 45 degree angle shooting right down, out and away from our trailer. And of course, that light beam isn't going to stop right there.

It illuminates the side of the trailer and then continues out. So really nice placement on it.Let's look at the measurements here real quick. So you're going to be about seven and three eighths inch side to side. Height is right at two inches and it is going to stick out and away from your trailer. It's going to be by about an inch and three quarter inch and seven eighths, right in that area. So you're going to get a lot of bright, good, clean white or pure white light. And it doesn't take up a lot of room. I think it's pretty stylish looking. If I needed one, I'd definitely put it on there because I do like the intensity of that light and how bright it gets.A couple other things to note about the light is that it uses LEDs. And LEDs are a cleaner and brighter light. That's what gives us that pure white look. They last longer, they don't draw as much energy. So if I'm deciding on a new light, I'm definitely going with an LED. People are upgrading their trailers like crazy and switching over to LEDs, just so you don't have that power draw. And you don't have to chase bulbs and constantly change bulbs. That's always kind of a headache. These trailers bounce around a lot. They get hot and cold a lot. So those filaments on those incandescents tend to wear out pretty rapidly. So LED's a good idea.And then the mounting, you'll see it when we do the installation, but underneath the light is a separate base. That's that black base that uses three and three quarter inch mounting holes on center. Then the clear LED light mounts to that base. You don't really have to worry about it. That is four and three quarter, but that three and three quarter's the important part, those are the holes that you'll actually be putting into your trailer.And as far as the installation process goes, it's really pretty straightforward. It's just a two wire design. So white is going to go to ground. Black is going to go to our 12 volt power source. We have the base. This is what creates that downward angle, gives us that porch light feel. You want to get that mounted in the position you choose, and you want to bring those wires right through the back of it, just like that. Now we've got excess, as you can see. We're going to be tucking those back in. Just going to get it lined up where we want it, make sure you get it level. And then we'll use a screw here and here to secure that to the trailer.All right. Once that's nice and secure, time to bring our light in. We're just going to use a couple butt connectors to connect these together. We're using heat shrinks here just in case any moisture gets in there. Part number is DW 05744-5 if you don't already have them. Just want to crimp that down to where it grabs a good hold to that wire and give it a tug. Do the same thing on the other one there. Now we'll connect them up there.All right. Once we have those connections made, we'll use a heat source to shrink these down. Generally, you want to use a heat gun or maybe a mini torch and then just gently heat them up.And you can see that's what we're looking for. That heat shrink comes down around. You have a little clear gel that comes out of the end of it. Just seals it up so we know no moisture is going to get to it. Now we'll just start tucking our wires away there.And once those are tucked away, you'll notice we've got our holes here and little slots here. So we're going to bring our light up. We're going to line those holes up with those slots and use a couple more screws and hold it in place. Now the hardware is not included because every application is going to be a little bit different. So you will have to provide your own hardware there. And once we've got them both started, we'll just secure them down.All right. Now let's test it out, make sure it works. Now testing it's really going to depend on which one you get. If you have constant power in the switch, you want to flip the switch on top. In our case, we've got it wired directly. As you can see, gives off a nice bright light.All right, everybody. I hope that information was helpful and you know how to get your new light installed once you do get it. And outside of that, we'll check you later.


Customer Reviews

LED RV Utility Light with Switch - Surface Mount - 4 Diodes - Wedge Base - Clear Lens - 328-K-0054BS

Average Customer Rating:  4.0 out of 5 stars   (4 Customer Reviews)

7-1/4" x 2-1/4" Oval. LED utility light illuminates your trailer or RV's exterior at a downward angle. Includes on/off switch. Durable polycarbonate base and screw-on lens. Surface mount - hardware not included. 2-Wire pigtail.

- 328-K-0054BS
by:

It’s an ok light, bright and easy to install. But for a light to mount outside, I doubt it will last long. The switch is on the top with a thin boot that will doubtfully last long. After the first rain there was condensation inside with the LEDs. But it’s still working, looks good and will be easy to replace with a new one, since they’re pretty cheap, that’s fine for me. RVs = maintenance anyway, just keep an eye on it.



- 328-K-0054BS
by:

perfect match



- 328-K-0054BS
by:

This light is for the front of my toy hauler camper. I went to the camper dealer who sold the camper and they couldn't find me the correct light. So I looked on etrailer , I found the correct light with pictures and great product description. I have used etrailer in the past and found everything I needed. I had the light shipped to me and it was delivered right on time. Thank you for making (finding stuff) easier and more enjoyable.



- 328-K-0054BS
by:


4
4

Ask the Experts about this Command Electronics RV Lighting

Do you have a question about this RV Lighting?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv lighting for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv lighting information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Randy B
Installed by:
Randy B
Employee Chris R
Video Edited:
Chris R
Employee Daron K
Edited by:
Daron K
Employee Brian T
Written by:
Brian T
Employee Noah M
Updated by:
Noah M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624