/
Patrick Distribution/
Ceiling Light/
Dome Light/
LED Light/
12VItem # 277-000113
Orders above $50 qualify for Free Shipping
Video of 3-LED Surface Mount Dome Style Light Fixture - 12V
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Patrick Distribution Three LED Surface Mount Dome Light, part number 277-000113. This three LED surface mount RV dome light is the perfect replacement for your old incandescent bulbs. Because it's LED, it's going to last longer and draw less power. It features a diamond plate acrylic lens to help distribute the light. It measure seven and a quarter inches long by four and a quarter inches wide, and one inch deep. It comes in a quantity of one, so pick up as many as you need for your RV. Now that we've got all the features, I'll go ahead and show you how to get it installed.
As you can see, the light above my sink here, the switch is broken and my light is not turning on, so I'm going to go ahead and replace the whole light. To replace it, it's a good idea to go ahead and kill the power, so we don't get shocked. To remove the light, we'll start by removing the lens first, so we can reveal our mounting hardware. I'm just going to slide the lens outward towards me, drop it down, as you can see, my four locations. And our last one. Go ahead and catch the light.
With the screws removed, let's drop it down and reveal our wires. We've got some wire nuts here. I know that my orange and white is my power, and my white is my ground. Let's disconnect them and we want to be sure and save them, because we will be re-using them. Now let's bring in our new Patrick Distribution light. The wires come pre-stripped.
We'll start off by removing the lens, that way we don't have to do it later, and that way we can easily put our hardware in when we get it mounted. Let's take our power wire first. Then our ground, the same. I'll just tuck my wires back up in the place. And I'm going to be re-using my mounting hardware. Try to cover up all my mounting holes.
Now we can put on our lens cover and try it out. Perfect. And that's going to complete our look at the Patrick Distribution Three LED Surface Mount Dome Light, part number 277-000113.
Average Customer Rating: 4.7 out of 5 stars (27 Customer Reviews)
I have an older boat and I replaced the interior lights. They work great and the battery consumption will be a lot less and they are brighter, 511271
Still working great
Great product. Great service. 467247
We installed these and another type of LED’s we bought from etrailer to replace the existing OEM lights on our travel trailer. Both types installed easily and lined up perfectly with the existing holes. Lights are bright without all the heat that the original lights gave off and are well worth the money. 568498
oh' so easy to install and so much more lite with less battery 446893
I got this light because the utility trailer I purchased had none. The description was accurate. It was easy to hook up to my running lights on the trailer. It provides a good amount of light to see inside the trailer at night. I would recommend this item. 544505
George, I ended up at etrailer after a fairly exhaustive search for all of the hard parts contained in my order. I found Timken bearings, but not all of them. I found SKF seals but they were 4 days out plus for delivery. The cost of USA made name brand bearings wasn't the issue for me, it was availability. As you may know, the axle that takes those 3" OD inner bearings with such a small 1 1/2 spindle is an old, possibly very old Ag or boat trailer axle. They are meant for high load, but slow speed use. In comparison, the bearings you sent while appearing to be of good quality to the naked eye are also much smaller rollers indicating a higher speed bearing but of less maximum load capacity. None of this really matters when you have such a hard time finding the parts needed to complete the job in question. I simply state this for your information, but certainly, you were already aware if the differences in sizing and load capacity. It's doubtful that the trailer in question will EVER see enough load to make any difference in performance whatsoever, so please don't take my statement as a complaint. As for the seals, they are the correct dimensions, and I did find your website helpful in double checking my cross reference work between brands. I'm also sure they will work just fine, but they do lack an innerspring to hold the tension of the inner lip seal against the spindle's seal area. Again, they will do the job, at least at first but I'd guess they won't last nearly as long and aren't a double lip seal design as the SKF, and National brands were. I'm not complaining one bit here, I promise. The cost factor differences were dramatic to say the least. The 2 inner bearings and 2 inner races made by Timken were equal to ALL 4 bearings and races, plus the seals from you guys. Look, I realize that stocking such expensive and nearly obsolete parts made in the USA isn't a business model for anyone who wants to stay in business very long selling something that can be found down the street at nearly the same price. I understood what I was ordering before I ever started putting things into the cart on your website. As a heavy equipment mechanic of 30 years experience, I promise your parts will get the best of treatment and a proper start to their life, hopefully, a long use life without issues. The bearings will be sonic cleaned before they are every packed with the best of grease choices. All the races and the seals will be installed with the proper driver to make sure they are square and seated correctly into the hub bore. I assume if you use this review of mine for your website that you will not edit it in any way. What people using your site and customer service need to understand is that while I might see the differences I do not think I purchased ANY sub-par parts. Other customers need to also know that "In Stock" with you guys means "In Stock" and after hours of phone calls looking for those particular parts it was a very welcome thing to read on a website and even better when the order shipped On Time, Complete, and at what I consider to be a very reasonable cost. They would also need to know that your website is just chocked full of easy to find information. My example besides the seal cross reference information is the wiring diagrams. The color differences between RV trailers and Utility trailers makes you double check things to make sure you got it right and ALL that info is readily available on your site. Much easier to access than other companies. In closing to what certainly is an overly detailed reply to your request for feedback, I'd just like to thank you, George. Thank you and your company for doing the EXACT thing you said you would and thank you for taking away a fair amount of frustration searching for parts. I will certainly use your company again and again if for nothing else, it's ease of use and promptness of service. If you'd seriously like pictures I will be happy to try and supply them at a later date. For now, this old trailer has to get back to earning its way. 504600
The lights are mounted in a toolbox under the lids and they work well.
Very good price and easy to install 727561
Great products, thanks for having top of the line parts. 706574
High quality dome light. Fast shipping and order processing. 705816
Work out great a lot of lights in the camper now.thanks 688360
The light works great! We got it for under the bathroom sink in our RV and now we can see everything in there. 649941
Great light. Very bright. Super easy to install. Will be ordering more to replace the remaining old lights I have. 640095
Very happy with the led lights I ordered actually they were better than I thought they would be, I definitely would order more if the occasion arises 637744
Excellent light easy to install. 527058
Everything worked very well! Thanks 499401
Great! Replaced my pickup truck shell's light with this. 477456
Replaced my original lights with these, running off of a separate battery in the trailer rather than vehicle power. Provide ample light for my needs. 467375
Great, provides light for times when trailer is not connected to AC power.
As described, perfect for wardrobe closet lighting and shaving lights in our fifth wheel. Super price and fast service from etrailer....Will buy from them again. 454761
good product as advertised easy to inst all 441544
great
These lights are fantastic! Replaced all my incondescent ones and it's like a new trailer. The only thing better than this product is the great service etrailer provides. 373029
Excellent quality & value. 368863
Have not installed yet, but it should do the job. 357603
not only a great item but exellent CUSTOMER SERVICE!!!!!! 357518
Good replacement light. Much brighter than stock bulbs and more economical to use 353147
Product is good quality and easy to install, fast shipping! Not quite as bright as I had hoped for, but they get the job done. 349454
I have two of these installed in a 7' x 12' enclosed trailer. They light up the whole place. 317239
These lites are a great lite for value. 311702
Ask the Experts about this Patrick Distribution RV Lighting
Do you have a question about this RV Lighting?
At etrailer.com we guarantee:
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.