Phoenix Faucets Catalina RV Kitchen Faucet - Pull Down Spout - Dual Lever Handle - Bronze

Video Transcript for Review of Phoenix Faucets RV Faucets - Kitchen Faucet - PF221503

Today we're going to take a look at the Phoenix Faucets Catalina RV Kitchen Faucet with the dual lever handles, pull down spout, and a nice rubbed bronze finish. Now this faucet will let you upgrade your kitchen faucet in your RV or camper. Has the pull down head right here, which will provide a nice thorough cleaning of your dishes in your sink. If you notice at the top, has this push button that'll turn the water on or off, and at the very bottom, there's a toggle button that'll let you switch between stream or spray options.Now, they do include this hose weight that you put onto your spray hose here. That weight can be adjusted anywhere along your spray hose, and enables the sprout to self retract when you're done with it. It'll automatically pull it up into the faucet itself.

The spray hose has a quick connection on it. Let me just show you, I'm going to it to the back here, but you can see how it's connected. There's a little lever there. If you just push that lever, you can disconnect it, and then to reconnect it, just push it right into place so it gives you a quick connection to the faucet itself.Now this is a dual handle design with the lever style handles. They use a quarter turn cartridge stem, which enables the faucet to fully turn on and off with just a quarter turn of the handle.

They do use a washerless design which reduces friction and daily wear for long lasting durability. On the spout right here it does use a low flow aerator which will reduce the flow of water, helps conserve your water supply. The whole faucet itself is a non-metallic ABS plastic construction. It does use, if you look on the bottom here, all that white portion, that's a one piece spin-welded palm underbody and inlet shanks. Again, it's a rubbed bronze finish, provides a nice sleek look.It's a three hole installation.

The inlet shanks, they use the standard male NPSM connections. Does include this deck plate. The two mounting nuts with the rubber washers are all included. Spray hose, like we had mentioned. Now in the instructions, they do require some tile and tub caulk when you install this.

Now that is not included. Flow rate on this is 1.8 gallons per minute.Give you a few dimensions on this. We're just going to do the base first, so the base dimension from one end to the other is going to be right at 10-1/4" long. The width on it is right at 2-1/4" wide. The inlet shanks for the hot and cold water right here, the distance between those are going to be center to center right at 8". The length on the shank itself, is going to be right at 2" long. Now the base, including the handles, I'll get the tape measure, we can measure those, but the handles in the off position like they are now, if we go from the end of one handle to the end of the other, you're looking at 13-1/2" wide. If we go to the height, the height on it from the bottom of the base to the very top of the handle, you're going to be looking right at 3-1/4" tall.The depth of it if you turn it into the open position, so from the front of the handle to the back of the base here, you're going to be looking right at 3-1/2" deep. Then the last measurement we'll do the spout. The spout overall height we'll measure from the bottom of the base to the very highest point on the spout. You can see it's going to be 14-1/8" tall. Then the depth measurement on that, if we turn it and then measure from the front here to the very back of the base, you're going to be looking right at 10-1/2" deep. But that should do it for the review on the Phoenix Faucets Catalina RV Kitchen Faucet with the dual lever handles, the pull down spout, and a nice rubbed bronze finish.