Pop-Up Camper Catch - White - Qty 2

Video Transcript for Pop-Up Camper Catch Review

Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the pop-up camper catch. These are just going to be those two little tabs that we need to have on either side of our pop-up camper to make sure that everything catches and stays in place while we're in transit or while we have this in storage. So these are going to be that made out of a steel with a nice thick powder coat to make sure that they're not going to get rusty over time. We'll also get the hardware.

This also has a coating on it to not only match, but also again keep any rust or corrosion to a minimum. So we'll get the two catches and our four screws to get everything installed. I'll give you some measurements so you can see if it's going to be the right size for you.Length wise, we're looking at at about an inch and a quarter and then about seven eighths of an inch, maybe 15/16 or just under an inch for the length there and it goes out about three eighths of an inch. We'll have about a quarter of an inch of space on the inside. So from outside edge to outside edge here, it's three eights of an inch.

The inner edge is going to be about a quarter of an inch, so just giving you an idea of what it's going to fit.The mounting holes are spaced apart by roughly three quarters of an inch center to center. And then our screws are an inch long. It does come with. Or it is covered by the lifetime warranty from JR Products and that's pretty much all there is to it for our pop-up camper catches. There are a couple of other configurations of these, maybe a couple different colors, so if you need something a little bit different, we should be able to accommodate you there.

And we do have a lot of other accessories and replacement parts for your pop-up camper, your RV or any other accessories here at etrailer.com, so definitely check those out if you're interested. Thanks for watching and we'll see you next time.