1. RV Door Parts
  2. JR Products
  3. Pop-Up Camper
  4. Latches
Pop-Up Camper Latch and Catch - White

Pop-Up Camper Latch and Catch - White

Item # 37210845
lowest price pledge
Retail:$27.25
Our Price: $16.78
You Save: 38%
RV Door Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.66 lbs
Quantity: 
In Stock
JR Products Latches RV Door Parts - 37210845
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Pop-up camper latch and catch secures your pop-up when stored. Constructed of steel with white powder coat. Includes mounting screws. Lowest Prices for the best rv door parts from JR Products. Pop-Up Camper Latch and Catch - White part number 37210845 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (7)
  • Q & A (1)
  • Videos (1)
  • Photos
  • Why etrailer?

JR Products RV Door Parts - 37210845

  • Pop-Up Camper
  • Latches
  • JR Products

Pop-up camper latch and catch secures your pop-up when stored. Constructed of steel with white powder coat. Includes mounting screws.


Features:

  • Pop-up camper latch and catch secures your pop-up when stored
  • White powder coat
  • Includes mounting screws
  • Lifetime warranty


10845 JR Products Fold Down Camper Latch & Catch, White





Video of Pop-Up Camper Latch and Catch - White

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of JR Products RV Doors - Entry Door - 37210845

Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today, we're taking a quick look at the JR Products Pop-up Camper Latch with Cam. This is going to help keep your camper latched and closed whenever you're not using it, so it just has this kind of cam style. As you flip that lever closed, it pulls this little hook in towards the center, pulling the other side closed, so it keeps everything nice and tight. We can adjust that by turning this piece.

There's a little captured nut there that provides that tension. Then once that is all the way snapped down, you can place a padlock on it.It comes with the hardware to mount both this side and the other, so it's going to grab onto the other little hook and hold that tight. Then once the snaps down in place, there's a little kind of bump out, there's a little detent there that fits into a recessed little point on this. With the white powder coat, it's kind of tough to close this, and without it being actually mounted to anything. I was trying to make it force close, but it really doesn't want to go.

So the first time you use this, you might have to really coax it in place, but should work out well. Again, comes with those mounting screws so you won't have to worry about picking up anything extra. They are powder coated with white as well, so everything's going to match.Now, I have this threaded all the way out, really about as far as I'd like to, just so that the end of the bolt is flush with that nut. So if we close that up from the latch side, through the top of the latch to the inside of that hook, it's about 3 and 1/2 inches. So that's about the widest that that can span.

If we pull this in, thread it all the way down, we can see what its minimum is. There, that bolt kind of stops, it's now hitting the other side of the bracket. So that would be our minimum span. That's about 2 and 7/8 inches, maybe 2 and 1/4 once it's all the way smashed down. So between 2 and 3/4, and 3 and 1/2 inches, this should work.As far as the latch length, it's about 4 and 5/8 inches.

The height is about 1 and 1/2 inches tall. The bracket measures about 2 inches wide by about 1 and 7/8 inches long. The distance between our mounting holes, center to center is about an inch one way, and then about an inch and 1/2 the other way.For our small bracket, it measures about an inch and 1/4 by about 7/8 of an inch, or actually about 13/16 of an inch. And then that sticks up just 3/8 of an inch. The diameter for the locking portion for a padlock, it's about a quarter of an inch there. So as long as you have a shackle that's a quarter inch or less, should work out just fine for you.But that's pretty much going to do it for our look at the JR Products Pop-up Camper Latch. There are two other versions of this available, they just have different finishes. We also have a black coated one, and then a silver that just has a zinc finish. You can find those here at etrailer.com, and thanks for watching.


Customer Reviews

Pop-Up Camper Latch and Catch - White - 37210845

Average Customer Rating:  4.6 out of 5 stars   (7 Customer Reviews)

Pop-up camper latch and catch secures your pop-up when stored. Constructed of steel with white powder coat. Includes mounting screws.

- 37210845
by:

It’s exactly what I needed for secure highway travels this summer! It came out cheaper with the exchange rate than if I had gone with Another online retailer or a local RV dealer as well. My only recommendation is the Philips screws that came with are terrible and where stripping as I was installing the latches. I ended up reusing the Robinson’s that camp with the trailer.



- 37210845
by:

Latches are good quality but the screws are even smaller than what was already in the trailer so they will not work to replace existing latches (for me). I will need to find bigger screws or a different way to attach them.



- 37210845
by:

Very good service from Tommy. I had an additional item I wanted added to a backordered item, and all was coordinated into a single shipment which saved added expense. Highly recommended!



- 37210845
by:



- 37210845
by:



- 37210845
by:



- 37210845
by:


7
7

Ask the Experts about this JR Products RV Door Parts

  • Pop-Up Camper Latch and Catch
    There is not a uniform industry standard for dimensions of pop-up camper latches, it is whatever the OEM sources at the time of build. I do not have the ability to pull up specs for a 2004 Coleman Camper and identify what latch and catch was used but I can provide you with a similar part that is currently being used by OEM's producing pop-up camper. Please take a look at the Pop-Up Camper Latch and Catch - White, # 37210845 and consider replacing the whole assembly. Please note the...
    view full answer...



  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv door parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv door part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Kathleen M
Installed by:
Kathleen M
Employee Mike S
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.