Don't Miss These Holiday Savings!
This dust cover fits over your Olympian Wave 6 catalytic heater (CAM57341 - sold separately) when the heater is mounted. Protects from dust and dirt.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Our Olympian heaters are designed and built to provide years of comfortable radiant heat and economical LP gas consumption. Not only are our heaters efficient but they are safe, as well. Because of the integrated double platinum catalytic heating system, no harmful amounts of waste gases are produced. Most heaters are equipped with low-quality materials, which obstruct oxygen flow. This can lead to gas being released without burning, resulting in serious health hazards. The Olympian catalytic heating element features a low-density, spongy texture which allows for perfect transport of the oxygen needed for combustion.
The catalytic heating element is evenly impregnated with platinum. These added safety features ensure proper elimination of the mix of dangerous gas emissions. Olympian heaters produce radiant heat as a result of the catalytic combustion process. Like the sun, Olympian heaters radiate heat directly to people, floors, walls and other objects without heating the air first, so warmth is felt immediately. Radiant heat is absorbed by objects and then emitted into the air and heat the surrounding area. Therefore, your Olympian heater should be oriented to direct its warming rays toward the space to be heated, much like a flood light is positioned to illuminate a desired area. If installing in the interior of your RV or boat's cabin, it is recommended to have a certified technician handle the installation.
This will ensure the installation meets local codes. Please read all directions and warnings in your instruction manual. Keep it in a safe place for future reference. When choosing a location to install, be sure that the heater is located out of traffic and away from furniture and draperies. To assure complete combustion, it is necessary for the room to have an adequate fresh air supply.
Turn heat control knob to Start Off position. Make sure gas supply is turned on and gas is available at the heater. Depress control knob firmly for 10 seconds. This will allow gas to flow into the gas lines, removing any air. You should hear gas flowing to the heater pad.
While continuing to hold the control knob in, press Piezo Sparker button 1 or more times until gas flame spreader is lit. The flame spreader should now be on. If not, repeat pressing Piezo Sparker button until flame spreader is lit. After initial ignition occurs, keep control knob depressed for 45- 60 seconds maximum. Release the control knob, push knob in slightly, and immediately turn it to high heat setting. The initial small blue flames should become extinguished and the catalytic combustion process is now taking place. If catalytic pad ignition fails to start up, wait 5 minutes and try again. Allow the heater to operate on high for 10 minutes to assure even heating of the catalyst pad. You may now set to Low or Medium. To turn the heater off, turn the control knob to the Off position. It is recommended that the heater be kept covered at all times when not in use. Custom made dust covers are available from the factory or your local dealer. .
Average Customer Rating: 4.9 out of 5 stars (63 Customer Reviews)
This dust cover fits over your Olympian Wave 6 catalytic heater (CAM57341 - sold separately) when the heater is mounted. Protects from dust and dirt.Fits great fast delivery
Arrived via UPS. External packaging A-OK. This heater cover was packed in the same box as a very heavy receiver adapter I ordered. The retail box/cover packaging did not fair well, as the heavier item bullied and beat it up harshly. BUT, the cover survived, with no damage. Thus the 4 stars. Otherwise, all is good.
This cover fits our heater perfectly and provides the protection needed to keep the heater clean and in good working condition.
As always Camco products are no. 1. Thank you for stocking such a fine cover for my Camco no. 6. Gil R
Product as described, prompt, economical shipping.
Received this in record time where other Companies have them on back order
Great company with great service. Price was fair and delivery was quick. I would buy from this company anytime!
Absolutely excellent! The very best service from anyone - fast, accurate, and as promised.
perfect fit, well made
Hello Carol C. Yes, I've received my purchase of a Camco Custom-Fit Dust Cover for Olympian Wave 3 Catalytic Heater- Portable. I'm pleased! Thank you very much.
High-quality cover. For long term storage, I will also place the heater with the cover in place in an air-tight bag that will cover the bottom of the unit.
I cannot tell you how impressed I am with etrailer. Their shipping speed is phenomenal as are their communications. This product is high quality, but it could be just a little larger for the wave 3 wall mounted heater. It works, but you really have to stretch the Velcro for it to connect around the gas connection to the heater. I am worried the Velcro will tear eventually, but again, it does work.
I have both the slip over cover and the one with bungee on the back to hold it over a wall mounted heater. Currently use the bungee one most Because the heater Is wall mounted in the camper. Both are high quality and very durable providing good protection for the heater. They are a must to keep dust out of it.
Product as advertised.
Had postal problems on my end. Anthony at etrailer help get things straightend out. Excellent company to do business with.
Product good, service Great!
A necessity to keep heater free from dust and working well.
Dust greatly shortens the life of the Wave 8 catalytic heater (a great heater). It needs to be stored with a dust cover. etrailer had them in stock, they fit, rapid shipping and not very expensive. If you have a Wave 8 you need one of these.
As advertised. Covers are important to protect the catalyst on these heaters from contamination.
It is always very easy to order from etrailer. If I have a technical question, they are quick to answer it. Pricing is competitive. The cover is as described and fits my application just fine.
It fits, nicely made, it works.
Nice cover. Should come with the heaters though.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.