Heavy-duty, aluminum and steel cargo carrier lets you haul your generator to the campsite and gives close access to an outlet without unloading. Lightweight, 24" x 24" aluminum tray and folding steel support arms hold up to 500 lbs.
Features:
Specs:
Note: Bumper weight capacities vary by manufacturer. Please be sure to verify the weight capacity of your bumper with the manufacturer prior to loading.
Whether you're hauling a small suitcase, large 100 lb generator, or gear for a weekend camping trip, this dynamic cargo carrier tray has over 60 different tie-down points (tie-down straps sold separately) to strap down your cargo from any angle, giving you the security you want traveling on bumpy gravel roads, or flying down the highway over long distances.
This highly versatile, expandable design allows you to lengthen your cargo-carrying platform from 2' all the way up to 8' (additional trays and support arms sold separately). You can safely haul and store multiple generators or propane tanks on one side and all your camping gear and coolers on the other side.
Average Customer Rating: 4.7 out of 5 stars (101 Customer Reviews)
Heavy-duty, aluminum and steel cargo carrier lets you haul your generator to the campsite and gives close access to an outlet without unloading. Lightweight, 24" x 24" aluminum tray and folding steel support arms hold up to 500 lbs.Great way to add some extra storage to a RV; in my case a new generator. Solid construction and easy assembly as well. I think the aluminum on top of steel beams (where the stability is needed) adds “some color” too. I opted for the sturdier on top of the bumper installation as I only needed the given 24x24” space of the single try design I ordered.
This cargo carrier is exactly what I was looking for. After checking that my trailer bumper was rated for what I wanted to use this cargo carrier for I pulled the trigger and made the purchase. My order shipped quickly and arrived in the time specified. Assembly and mounting were easy enough once I puzzled out the included instruction card. Some mentioned that the assembly instructions are inadequate, there is a web address for the same instruction card but also on that page is a video that will give you some helpful hints though not thorough since that video doesn't show how to assemble the mounting brackets. However, with a little patience puzzling over the included instructions you will figure it out quick enough. I certainly didn't spend more then 30 or 40 minutes getting my GennyGo mounted and assembled. Sorry I didn't take any photos of my process. Anyway, this 24"X24" 200lbs capacity carrier is perfect for what I wanted - A way to carry my generator without having to load it in the bed of my pickup with our bikes. With this cargo carrier I can secure and lock my generator to the carrier and it's ready to go when we pull into our campground.
Took my 86 lb generator acrossed the country. Did exactly what they said. I love the multiple tie down spots, makes it easy to fasten down my geni and keep it tight.would recommend this product to everyone.
Great product, stronger than I anticipated. Fairly easy to assemble. I did have to cut the support arm ends where they go over the bumper so they didn't hit the trailer cab,no big deal.
Happy with my purchase.
Well made and easy to put together!
I was at first surprised at the diminutive size of the box - but it soon became clear - the utter genius in the design of this product. The tray comes in 4 triangular pieces that allow for a variety of set-ups. I purchased the hybrid model aluminum tray and steel support arms. There were a couple of things in the instructions that seemed vague, but a second and third looked confirmed the instruction (this mainly had to do with the attaching of the steel support arms and extension option - as always one should look through the instructions BEFORE beginning the task). Once assemble everything fit like perfectly and was a breeze to install. Also purchased Item #MO34VR support struts. That product proved to be much more work than the tray, but did work out nicely and is a HUGE peace of mind product, totally worth the work and the price. I have a 24' Jayco Jayflight SLX with a 4" square bumper. After drilling through the frame I can assure you you'll need the struts. Yes the bumper joints are welded solid but the metal is not nearly as thick as it may appear. Thinking "this is gonna take all day", a few seconds after starting the drill on the frame, I was through the other side. Buy the struts if you have a comparable rig.
I have not installed it yet, but I have put it together and everything looks perfect.
It’s a nice cargo trailer but it’s too small so it don’t get to use it
Normally I'm not one to leave negative reviews, but you guys sent me an email so here I am.
To be blunt, I get where they were going with this design but it's not nearly sturdy enough. My generator weighs 134 lb and is a little propane 3000W. It didn't matter how much I tightened to the clamp bolts, this thing was not even close to strong enough to hold the generator. The platform seems like it was acceptably strong, but the means of mounting the platform was terrible. I tried to adapt it with some stronger u bolts but the little struts under the platform couldn't quite handle it either. The metal was thin enough that even with 1 in washers, it's slowly began bending.
After about 2000 miles of stopping every couple hours and screwing with it, I just took it off and threw it away.
Arrived a day late but in good condition
Easy to mount, very sturdy. I’ve used it to carry my two Honda generators, or if I know I have power, my portable Traeger and pellets.
Was not what i expected very thin aluminum and the brackets seem very under rated I have a 100lb generator and the directions say this product is rated for 200 lbs
Your product looks like it would do the job nicely. My trailer bumper is another story. It is so lightweight i’m sure it would rip right off and my honda generator would be a gonner for sure. The cost to have a reinforced bumper made would buy a new lighter generator , that would solve my original problem
Item arrived on time and components of good quality. The only reason I'm returning 4 stars and not 5 is the abysmal instructions and diagrams - kind of a suck it and see exercise, but other than that, very pleased.
Was very pleased with the generator car rier.
Works great. Carry my generator on back of camper. Just took a long road trip hit some rough roads at high speed held up great
Easy to install. Just make sure you get the right bolts and nuts for the brackets and not use the tray ones. I carry my small 30 amp generator one it.
Purchased this product to hold my generac 3000i generator. Was the perfect size and had enough holes to adequately strap down the generator and gas tank
Great sturdy product
We were not expecting the vibration when our generator was running. The entire trailer rattled and couldn't wait to turn it off.
Exceptional customer service. The product is well made, easy to assemble, sturdy and attractive.
With the addition of Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets - 4" to 4-1/2," it securely holds Predator 3500 generator on the bumper of my travel trailer.
It was awesome received it within 4 days THANK YOU.
Simple assembly, took around 30 minutes total. Brackets were both identical (right side only), should be fine but doesn't match the assembly diagram.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.