1. RV Camera System
  2. Furrion
  3. Backup Camera
  4. Observation Camera
  5. Built-In Microphone
  6. Touch Screen
  7. Anti-Glare
  8. Mirrored Image
  9. Night Vision
  10. Motion Detecting
  11. Waterproof
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen

Item # FOS07TASF
lowest price pledge
Retail:$735.57
Our Price: $639.45
You Save: $96.12
RV Camera System
This item qualifies for Free Shipping
Shipping Weight: 3 lbs
Quantity: 
RV Camera System FOS07TASF - Dashboard Pedestal Mount,Suction Cup Mount - Furrion
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Call etrailer.com at 800-298-8924 for expert service. We are your Fleetwood rv camera system experts, and offer a lowest price guarantee. etrailer.com carries a complete line of Furrion products for your Fleetwood Bounder Motorhome 2010. Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen part FOS07TASF from Furrion can be ordered online at etrailer.com. Complete rv camera system installation instructions and technical support.
  • All Info
  • Reviews (29)
  • Q & A (241)
  • Photos
  • Why etrailer?

Furrion RV Camera System - FOS07TASF

  • Backup Camera
  • Observation Camera
  • Furrion
  • Built-In Microphone
  • Touch Screen
  • Anti-Glare
  • Mirrored Image
  • Night Vision
  • Motion Detecting
  • Waterproof
  • Below Rear Clearance
  • Side Marker Lights
  • 7 Inch Display
  • Dashboard Pedestal Mount
  • Suction Cup Mount

Wireless backup camera system has a waterproof camera with night vision. Touch screen, anti-glare monitor mounts to your dashboard. 120-Degree viewing angle and motion detector help prevent accidents. IR cut filter blocks infrared light in daylight.


Features:

  • Wireless backup camera system improves rear-view visibility and obstacle detection for your RV or camper
    • Minimizes blind spots and helps prevent accidents
    • Supports up to 4 wireless cameras (additional cameras sold separately)
  • Camera with CMOS sensor creates high-quality digital video in full color
    • Gives you a 120-degree viewing angle
    • Features a built-in microphone to pick up audio
  • 8 Infrared LED lights surround the camera lens to provide night-time vision up to 16'
    • Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
  • 7" Full-color LCD touch screen monitor shows a mirrored image for a precise view from the driver's perspective
    • Auto-dimming, anti-glare screen let you view the display in any lighting
    • Rear assist marker lines show distance from other objects
    • Brightness, color, contrast, and image orientation can be easily adjusted
    • Speaker projects audio sent from your camera
  • Motion detection triggers monitor to power on
    • Auto off setting lets you set your monitor to power off after 10, 20, or 30 seconds of inactivity
  • Quad screen displays 4 camera angles simultaneously
  • Built-in digital transmitter eliminates interference from other devices
    • Offers high-quality, uninterrupted video up to 492' away
  • 2 Different mounting options allow you to display the monitor
    • Tabletop mount designed with 4 non-slip pads to sit on your dashboard
    • Suction cup mount secures to your windshield or dashboard
  • Durable, metal construction is dust resistant and waterproof
    • IP65-rated to protect against dust and low-pressure water jet spray
  • Simple installation - minimal drilling required
    • Mounting hardware included
  • System can be used as a backup camera or for observation
    • Wire to reverse lights for backup camera
    • Wire to running lights for observation


Specs:

  • Monitor dimensions: 7-7/16" wide x 4-15/16" tall x 1-3/16" deep
  • Screen size: 7"
  • Camera dimensions: 6-5/8" wide x 2-9/16" tall x 2-5/8" deep
    • Mounting hole spacing:
      • Horizontally: 3-3/4" center to center
      • Vertically: 15/16" center to center
  • Tabletop mount dimensions: 3-5/16" wide x 3-1/4" tall x 4-5/8" deep
  • Suction cup mount dimensions: 2-1/8" diameter x 3-1/8" tall
  • Resolution:
    • Monitor: 480 x 272
    • Camera: 720 x 480
  • Wireless range: 492'
  • Voltage: 12V - 24V DC
  • Camera cable length: 6'
  • 1-Year warranty


Infrared LED Night Vision

LED Night Vision

This camera has 8 infrared LED night vision lights that produce a clear, quality picture and give you the flexibility to back up your RV in low-light conditions at dusk or in complete darkness at night.


Camera with Built-in Microphone and Monitor with Speaker

Cam-Mic-Monitor Speaker

The built-in microphone on your camera is the perfect tool for backing up your RV. The microphone allows a friend or family member to relay information and instruction to you through your monitor's speaker, providing peace of mind as you work together to safely maneuver your RV.


Rear Assist Marker Lines

No more wondering if you're getting too close to that other vehicle. The rear assist marker lines take the guesswork out when backing up. This helpful tool displays reference points of objects within your view to avoid collisions and safely maneuver your RV.


Motion Detection

Motion Detection

The motion detect feature allows you to set the motion sensitivity level of your camera to low, medium, or high. On the low setting, your camera will not detect a pesky raccoon until it's very close or already in your garbage, whereas on high setting, it will detect the raccoon approaching from further away. Your monitor will automatically illuminate to alert you once motion is detected.


Auto-Off

Auto-Off

The auto-off setting is a great power saving option. Working in conjunction with the motion detect setting, this feature allows you to limit the amount of time your monitor stays on. Once motion is detected, you can program your monitor to power off after 10, 20, or 30 seconds of inactivity. The LCD auto off option will only power down the illuminated screen while keeping the monitor on.


Quad Split or H Split Display

Quad-H-Split Display

The quad split or H split display allows you to view up to 4 camera angles at once (additional cameras sold separately). Depending on your camera setup, you can view blind spots behind your RV or on each side of it while driving down the road or backing up.



729936 Furrion Vision S Digital Wireless Observation System - Night Vision - Rear Mount - 7" Screen - Touchscreen

FOS48TA-BL Furrion Digital Wireless Observation System w/ Color LCD Monitor - 4.3" Screen

FOS48TAPK-BL Furrion Digital Wireless Observation System w/ Color LCD Monitor and Bracket - 4.3" Screen

Replaces 729936

Installation Details FOS07TASF Installation instructions


Customer Reviews

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen - FOS07TASF

Average Customer Rating:  4.7 out of 5 stars   (29 Customer Reviews)

Wireless backup camera system has a waterproof camera with night vision. Touch screen, anti-glare monitor mounts to your dashboard. 120-Degree viewing angle and motion detector help prevent accidents. IR cut filter blocks infrared light in daylight.

- FOS07TASF
by:

The system works well. The range is far better than advertised. I’ve been 1/4 mile from my camper and noticed the picture was still being displayed on the screen in the truck. The only complaint I have is that I wish there were more possible adjustments to the picture. It’s hard to drive in bright sunlight without sunglasses, and the picture is sometimes hard to see with sunglasses on. I would still buy it again. It’s very helpful not only parking, but also for lane changes. 725301



- FOS07TASF
by:

The 7" monitor is great as an effective rear view mirror. I look forward to installing the side view cameras, but for now I only have experience with the rear view camera. The camera is great at daylight and serviceable at night (headlights tend to blind the camera a bit). As an unexperienced new owner of a travel trailer, I value the ability to better judge the distance of a car. When a car I passed shows up in the camera, it is definitely behind the trailer... I want yo mention one complication with my VW Touareg, though: As with several modern vehicles, the Touareg has some AC signal modulated onto the 12V for the rear lights. The car uses this signal to identify failing lights. The Furrion cameras cannot handle power that is 'contaminated' with such modulation. Therefore I had to modify the electric system of the trailer. I am feeding the rear- and position-lights now from the battery of the trailer. I added a weatherproof 12V relay that takes the car's modulated 12V to switch the clean 12V power from the battery. This way I don't accidentally drain the battery and the functionality is as intended. Well, I guess the Touareg cannot detect a broken bulb on the trailer any longer... 730436



- FOS07TASF
by:

I am very happy that I bought the Furrion Vision S W RV Back Up Camera System with Night Vision Rear Mount. It makes backing up, seeing what is behind you and what is going to pass you night or day, so much easier and safer, I can't believe I used to do it without it. Excellent purchase! 666644



- FOS07TASF
by:

After some research I purchased this system and couldn't be any more happier! Easy to install , I mounted below the center upper clearance light and wired to that light after I accessed the factory wiring. Instructions were very clear and setup was a breeze. Pairing the camera with additional side camera's was no trouble. The 7" monitor is great and the picture's are very clear ,the sound is great as well from the rear camera. I would highly recommend this product, great quality and ease of installation due to wireless features. 615248



- FOS07TASF
by:

Service was GREAT staff was very helpful . Installation was pretty simple. Product works nice. Hope to add side camera later. 625521



- FOS07TASF
by:

Will not install until spring Hopefully it will do what I need Ian was most helpful 722796



- FOS07TASF
by:

Furrion 7" Wireless camera was an easy installation with power coming from the center rear clearance light using red Posi-Taps. Instructions suggest mounting the camera at least 2" below the clearance lights to prevent 'blooming' effect. Our 5th wheel Glacier Peak had a wooden structural support at 2" so I drilled the power cord hole just above the wooden support which put the camera mount just underneath the LED clearance light. I turned on my truck lights which powered the clearance lights and saw that the wireless camera had a Blue power light. I next plugged the 7" monitor into a 12volt outlet in the cab of my truck and immediately had a picture of the rear of our trailer on the monitor. While checking all the monitor settings I discovered that the initial wireless camera pairing with the monitor was set on camera 1. Camera 1 view did not allow the use of the rear guidelines on the monitor. I did a manual pairing using the small pairing button on top of the monitor and set my camera to the rear camera which is camera 4. Once paired I was able to use the rear guidelines with the rear camera which provided a very clear rear view. The camera is adjustable so I set it at my preferred angle and made sure the wireless antenna was positioned as vertical as possible. So far there has been no signal loss, no blooming effect from the clearance light and all is good. 572470



- FOS07TASF
by:

Love the product! Worked great. The only reason I gave it 4 stars is you can’t configure the camera to a specific location. It is either for door or rear and I’m using it for the rear camera on my RV 819405



- FOS07TASF
by:

I bought this Furrion wireless system to replace a much less expensive wireless backup camera which malfunctioned from day one. The installation of the Furrion was easy and, so far, camera and screen function perfectly. 817355



- FOS07TASF
by:

Ordered the Furrion 7" Backup camera - the order was processed right away and just received it in great condition - I like the wide range of products eTrailer carries 815381



- FOS07TASF
by:

Delivery time was quick, was here in a few days. The camera system works great. The setup and installation was easy. Watching the videos that are available on the website is very helpful. Very pleased with my purchasing experience. I always check ET first. Especially knowing that if I find it at a lower price you will meet that price plus 10%. 800500



- FOS07TASF
by:

Works awesome haven’t had a problem with it losing connection even going down the highway at 70-75 mph. Makes a big difference backing the trailer up to see what’s behind you and to hear your helper given you directions 794127



- FOS07TASF
by:

Have had good service from the product. The 7" monitor is hard to see with poor brightness and contrast in near sunlight. You have to clean the camera lens because it does get a dirt film on it from the weather. 785356



- FOS07TASF
by:

Really like this camera only I wish it had zoom capability. It's just a fisheye, wide-angle fixed camera 771699



- FOS07TASF
by:

It's good for backing and parking but I love it for traveling in traffic, I set it to over lap mirrors so I don't have any blind spots, it makes it so much safer and easier to change lanes, especially in heavy trafic! It looses signal some times in bigger cities and I wish it had better distance focus! Over all I love it!!! 759181



- FOS07TASF
by:

I have had the camera for one year and it performs as advertised. I have a 36 ft 5th wheel and with the camera, both myself and my wife, feel very safe changing lanes with clearance of other vehicles. I recommend it for everyone. 749740



- FOS07TASF
by:

No issues with hookup. Good angle of view. Really helps having a backup camera when parking my 25’ camper. 740062



- FOS07TASF
by:

Good quality video. Only thing I don't like is the side cameras are too wide of an angle 732370



- FOS07TASF
by:

Good camera for the price, but GREAT customer service! Answered all of my questions and beat the expected delivery date. Camera fit as expected, still can’t say enough about the people that assisted me. 652263



- FOS07TASF
by:

Very good product easily installed and good suction cup for windshield, etrailer is the best, easy order questions answered and quick shipping and they stand behind product, could have gotten cheaper, but not worth it when you need customer service like etrailer offers 651844



- FOS07TASF
by:

Lots of help from ETrailer and a real good product from Furrion 641530



- FOS07TASF
by:

Order Sunday received Wednesday. Fast hookup. Would recommend etailers to anyone 614596



- FOS07TASF
by:

I have used E Trailer a few time in the last couple months and very satisfied with the service, speed, and price compared to others. I plan to look at their site for future products. Highly recommend this site for others. 612698



- FOS07TASF
by:

Easy install of two side cameras and a backup camera. Total time start to finish about 2 hours. Picture is great and reception is amazing at around 300’. Highly recommend the 7” monitor! Trust me!! Setup took less than 10 minutes to learn the cameras. My only complaint is I’d like more options on the display. Be nice to have three camera or two camera view. Otherwise love it and etrailer is the best! Fast shipping and an email to make sure everything arrived ok and I’m happy... 5stars 612138



- FOS07TASF
by:

I am single and this 7 inch camera will help me while backing my 35 ' 5th whl into camping sights and tight areas. My unit was pre-wired for this camera so, it made the install easier. Once I activated the monitor the pairing was instant. Had to change the local on the pairing from door to rear. My only question is, It suppose to beep if it detects motion while backing. That hasen't happen even when I had someone walk back there. But, I saw them. Happy I have this unit. Thanks e-trailer for your assistance and support. 607946


27
31
Show More Reviews

Ask the Experts about this Furrion RV Camera System

  • How to Install Furrion FCE48TASL Side Cameras On RV with Diagram
    To add two side cameras to your Furrion Vision S Wireless RV Backup Camera System with 7" Screen # FOS07TASF, you can use the Marker Light RV Side Cameras # FCE48TASL. I can understand your concern with the trailer having all LED lights, but it will not be an issue on an RV like yours which will provide more than enough power. So, the FCE48TASL install the same as any 2-wire (power and ground) side marker light, with the addition of the extra red wire to power the camera. I have...
    view full answer...
  • Best Multi Camera System Recommendation for 2019 Grand Designs 328M Toy Hauler
    Since you have a 2019 Grand Designs 328M pre-wired for a Furrion system and you are wanting a setup that will give you the ability to view multiple camera views the best and easiest solution is going with a Furrion 7 inch Monitor and Camera kit part # FOS07TASF with the clearance light camera kit part # FCE48TASL as well. What's great about this setup is that the install is super simple since your vehicle is already setup for the camera at the rear of the vehicle and then the clearance...
    view full answer...
  • Recommended Furrion Wireless Camera Observation System with 3 Cameras
    The Furrion Vision S Side Camera w/ Marker Light Bracket - 2 Cameras # FCE48TASL and the Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 7" Screen # FOS07TASF will work well for your 3 camera display. The monitor layout you are seeking is not how the system is designed. You can choose from the quadrant view to the H-Split view. I've attached a photo to assist.
    view full answer...
  • Installing Furrion Side Marker Light with Camera on 2019 Momentum 351M
    The Furrion Side marker lights with camera # FCE48TASL you will have the running light wire (brown) camera power (red) and ground (black). Because it sounds like you have two sets of wires, it is likely one set is running light power and the other is the ground. You can use a circuit tester like # PTW2993 to determine function. Once you have done so, the brown and red wires connect to the running light power and the black will connect to ground. This will give you camera power as long...
    view full answer...
  • Installation of Furrion Observation Camera System on Pre-Wired 5th Wheel Trailer
    The Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 7" Screen # FOS07TASF is a very popular system for many trailers. If your trailer comes prewired for a camera, this is most likely the system that it came designed for and it will be ready to simply plug and play. The photos I can find of your trailer show this prewiring specifically for this system which is the case the majority of the time with pre-wired trailers. You will simply plug in the camera to the...
    view full answer...
  • Backup Camera System for 2019 Ford F-250 and a 378FL Hemisphere GLX 39 ft 5th Wheel
    Your 378FL Hemisphere GLX likely has the pre wiring for a Furrion system. If this is the case then the Furrion RV Observation Camera System # FOS07TASF with the 7" monitor along with the Furrion Vision S Side Camera w/ Marker Light Bracket # FCE48TASL is what you are looking for when it comes to your trailer. To add a 4th camera you would need to use the Furrion Vision S Rear Camera w/ Sharkfin Bracket # FCN48TASF I'm not sure how well this camera will fit on your 2019 Ford F-250 or...
    view full answer...
  • Comparing Furrion Vision S Wireless RV Camera Systems
    The 7 inch # FOS07TASF and the 5 inch # FOS05TASF are identical with the exception of the monitor screen size as you stated. They both have the ability to use a view mode the 4.3 inch screen does not, so there is a difference from the smallest option # FOS43TASF.
    view full answer...
  • Best RV Camera Setup for Vehicle Towing 2 Trailers
    The best setup we're going to have for you is going to be a Furrion Vision S system that starts with part # FOS07TASF for the 7 inch display and monitor. This provides the best reception and overall visibility but what I really recommended it for is it's ability to have additional cameras added since you have the second trailer with # FCN48TASF. This gives you the ability to either have both cameras running to watch both of your trailers or either at the same time. You can mount the...
    view full answer...
  • How Does Furrion Vision S Side Camera w/ Marker 2 Cameras # FOS07TASF Typically Wire
    Your current clearance lights do only have a power and ground for the operation of just the light. The side marker Furrion cameras # FCE48TASL do have three wires. Two for the light operation which matches what your trailer lighting has and an additional power wire that the camera gets to power it. The camera shares the ground wire with the light.
    view full answer...
  • Furrion Backup Camera for 2014 Rockwood 5th Wheel and 3rd Brake Light Camera for 2012 Ram 2500
    I believe that you are correct about the wiring you found. You would want to test it with a circuit tester # PTW2991 though before installing the Furrion RV Observation Camera System # FOS07TASF as I am not sure what the wiring layout is for your 2014 Rockwood Signature Ultra Lite 8289WS 5th wheel. You definitely can use the Truck Bed Cargo Camera for Factory Monitor # 3460015 which comes with the toggle switch so you can choose which camera input you want to view on your factory in-dash...
    view full answer...
  • Wireless Side Camera for Viewing Gooseneck Coupler
    I suggest the Rear View Safety Wireless Hitch Camera # RVS-83112 for use in your truck bed for hitching to your gooseneck trailer. The wireless camera includes night-vision capability and uses 9V battery power (battery not included). It has a magnetic base to secure it to your wheel well. Just take if off and stow it in the truck when you're hitched. The color monitor plugs right in to your cigarette lighter outlet. Please see the linked video.
    view full answer...
  • Furion Observation Camera Recommendation for 2019 Jayco Eagle 5th Wheel
    For your 2019 Jayco Eagle that is pre-wired for a Furrion camera the Vision S kit part # FOS07TASF that you referenced is a confirmed fit and would work well. This kit gives you a 7 inch screen monitor to easily view behind the camper. Check out the review video link I attached for more info as well. The camper in the video is a 2017 Jayco Jay Feather similar to yours.
    view full answer...
  • Troubleshooting Furrion Vision S Prewiring Not Active on Fifth Wheel
    The wiring for the camera of the Furrion Kit part # FOS07TASF has two wires that need to be ran to turn on. The red wire would connect to the running light circuit power wire and the black to a ground. If your pre-wiring isn't active you could try tracing it back to where it connects to the running light circuit and I imagine that's where you'll find the issue. Or to bypass you can use included wiring that came with the kit and run it to the running light circuit like I mentioned.
    view full answer...
  • Best Back-Up and Observation Camera for 2019 Grand Design Fifth Wheel Trailer
    The best back-up and observation camera for your 2019 Grand Design Solitude 310GK is the Furrion RV Observation Camera System # FOS07TASF because its camera and 7 inch monitor combine to offer you the clearest view no matter the weather or what time of the day - or night - it is. The monitor is 7 inches which is large enough to ensure you aren't going to have to squint or struggle to see what is being shown; you can even adjust the brightness and color for that perfect view. The monitor...
    view full answer...
  • Installing Furrion S Vision Observation System to Pre-Wired Bracket on Camper
    We don't yet have an installation video showing how to mount the Furrion Vision S Wireless Observation System # FOS07TASF to the pre-wired bracket on your trailer, however I am glad to help walk you through this process. The bracket already on your camper should essentially be identical to the shark fin bracket that comes included with this kit (the bracket included just won't be used). All of the splicing on the camper's pre-wired bracket has already been done at the factory. All you...
    view full answer...
  • Solution To Make Backing Camper Trailer Easier into Campsite
    A better option might be an observation system to allow you to view behind the camper as you back up as well as to the sides as needed. For that you'd want the Furrion kit part # FOS07TASF for the main camera to view behind the camper and then the side view cameras part # FCE48TASL. This will give you the ability to see behind you and to either side of the camper at any time which will make backing up your trailer MUCH easier. Plus it costs less than the Trailer Valet and will be much...
    view full answer...
  • Plug and Play Backup Camera System For 2019 Montana High Country With Pre-wired Camera Hookup
    Since your 2019 Keystone Montana High Country already has the hookup connection wired for the Furrion systems then it will be an easy install. I recommend Furrion Vision S Wireless RV Backup Camera System w/ Night Vision part # FOS07TASF because it will be a plug and play installation on your Montana. This particular system comes with a 7" screen that mounts to either your dashboard or windshield. The 7" screen will allow you to add Marker Light RV Side Cameras w/ Night Vision for Furrion...
    view full answer...
  • RV Observation System Recommendation that Has Great Reception
    A more reliable backup camera would be what I recommend over the Buyers Products RV Observation Camera System # 3378883200 that you have. For that I recommend the Furrion Vision S system part # FOS07TASF instead as it has rock solid reception and will work great for you. The range of this is 492 feet so it would easily work for you. This setup is considered by most who tow to be the best around since it works so well so we recommend it highly.
    view full answer...
  • Can Different Brand Camera System be Used on Trailer with Pre-Wired Bracket for Furrion
    If your new Vanleigh Vilano is equipped with a pre-wired bracket for Furrion Backup Camera Systems like # FOS07TASF then a different brand setup can certainly still be used but it would just require a more intensive hardwired installation. The pre-wired bracket allows for an easy plug-and-play install so it is what I recommend but there's no reason any brand system of your choice couldn't be used instead. This particular Furrion camera system features a really nice 7 inch full-color...
    view full answer...
  • Camera System Recommendation for 2020 Jayco 27RB Travel Trailer Prewired for Furrion
    Yep! The Furrion Vision S system part # FOS07TASF is the correct system for your 2020 Jayco 27RB TT. This will easily install on the trailer using the already present wiring and bracket. This is the version of the Furrion systems that has the largest monitor so it's the easiest to see what's going on behind the trailer so it's the choice I recommend for you. I attached an install video for this kit on a similar Jayco travel trailer as well.
    view full answer...
  • Will the Furrion RV Observation Camera System Work with the Aluminum Body on a 2018 Ford F-250
    I spoke to my contact at Furrion about the Furrion RV Observation Camera System w/ Monitor and Bracket part # FOS07TASF and they stated that you may have interference issues with the aluminum body on your 2018 Ford F-250. They did not report of any issues with this but it is a possibility. Unfortunately, that is just the nature of a wireless camera system. It will be the same for the Furrion RV Observation Camera System w/ Monitor and Bracket as it would with any other wireless camera system...
    view full answer...
  • How to Determine Correct Wires for Furrion Observation Camera
    Thank you for purchasing the Furrion Vision S camera system from etrailer and though you didn't mention which camera system you purchased from us, I am more than happy to help our customers. Though I obviously cannot tell you what wires you have because there is no universal wiring colors, I can tell you that all you need to do is use the Cordless Circuit Tester # PTW2979 to find out which lights are your running lights or reverse lights (depending on what you want to use the camera for)....
    view full answer...
  • Can I Add Cameras to the Furrion RV Observation Camera System
    Yes, you can up to three additional cameras to the Furrion RV Observation Camera System part # FOS07TASF. For the side of your trailer, I recommend using the Furrion Vision S Side Camera w/ Marker Light Bracket part # FCE48TASL which is also a built in marker light. If you wanted to add a camera to the vehicle as well then you can do so with the Furrion Vision S Rear Camera w/ Sharkfin Bracket part # FCN48TASF.
    view full answer...
  • Will the Furrion RV Observation System FOS07TASF Work on a 2018 Jayco Jay Flight 27BHS
    Yes, the Furrion RV Observation Camera System part # FOS07TASF will work on your 2018 Jayco Jay Flight 27BHS. I assume your Jay Flight came with the factory Furrion mounting bracket so all you would need to do is attach the camera to this bracket, pair the camera and monitor to one another, plug the monitor in then you are ready to roll. I have attached a review video of the above system for you as well.
    view full answer...
  • Can You Upgrade a Furrion Vision Wireless Backup Camera System To Use the 7 Inch Monitor
    The Furrion Vision S Wireless RV Backup Camera Systems are only sold in kits. Therefore, you would need to obtain part # FOS07TASF in order to get the 7" monitor. That said, if you have an older system (Furrion FOS48TAPK-BL) then you would not be able to use this camera with the new monitor anyway as the two are not compatible (old camera with new monitor).
    view full answer...
  • Suction Cup Mount Recommendation for Mounting Furrion RV Observation Camera System # FOS07TASF
    Using the suction cup mount of the Furrion RV Observation Camera System # FOS07TASF looks to be your best option. That would get the display up and out of the way onto the windshield. This will also put it in an easy to see location as well.
    view full answer...
  • How To Invert Image on Furrion Vision S RV Camera System
    As installed, the camera system can either be wired to activate with the reverse lamps by tying the power wire into that circuit, or into the running lamps so that the system turns on with the running lamps or headlights. This is normal. If you want to be able to turn on or off the camera independent of the running lamps, you'll need to power the system from a dedicated 12-volt circuit. You could power it from an ignition sourced circuit that will power down with the ignition switched...
    view full answer...
  • Does the Furrion RV Observation Camera System Display in Mirror Mode?
    The Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 7" Screen # FOS07TASF is designed to display the mirror image for a precise view from the driver's perspective. This will show traffic on the left side on the left side of the monitor as you stated.
    view full answer...
  • Will the Furrion Vision 2 Bracket Work With the Furrion Vision S Camera
    Yes, the mounting bracket for the Furrion Vision 2 Wireless RV Backup Camera System is the same as the Furrion Vision S Wireless RV Backup Camera System so you can replace one with the other without wiring in a new bracket. The correct model that comes with a 7" monitor is part # FOS07TASF. In order to add additional cameras (up to three) you can use part # FCN48TASF, part # SCA48TA-BL, or part # FCE48TASL. There won't be any issues with using the above on your 2019 model year.
    view full answer...
  • Troubleshooting Furrion Side RV Camera Setup that Shows Wrong View for Rear Camera
    Can you verify that the side cameras are getting power? Sounds like they maybe aren't wired up. You probably need to sync the cameras to the right display option. If you go the menu and select pairing, the location that the cameras are paired to will have a red link by it. From there you can move the rear camera to the correct view selection.
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv camera system for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv camera system information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Jacob T
Video Edited:
Dustin K
Installed by:
Cole B
Video by:
Chris R
Video by:
Jacob H
Edited by:
Amanda M
Test Fit:
Shane H
Test Fit:
David F
Written by:
Halie H
Updated by:
Adam Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.