Valterra No-Fuss Flush with Check Valve
(32 reviews)
Price: $31.99
In Stock
Valterra No-Fuss Flush with Check Valve
Item # A70
Retail:$47.31
Our Price: $31.99
You Save: 32%
Orders above $99 qualify for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (32)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
Valterra RV Black Tank Cleaner - A70
- Black Water Tanks
- Gray Water Tanks
- Tank Rinsers
- Valterra
Tank flush helps clean out your black-water or gray-water tank. Check valve with backflow preventer keeps fresh water source free from contaminants. Permanent installation - connects to the waste tank and the outside wall of RV for easy hook up.
Features:
- Tank flush helps clean out your black-water or gray-water tank
- Jet stream spray removes and flushes away tank deposit
- Check valve with backflow preventer keeps water source free from contaminants
- 3/4" FPT end connects to a water hose
- Permanent installation
- Connects to the tank and the outside wall of RV for easy hook up
- Fits into a 1" diameter hole
- Hardware included
- 1-Year warranty
A70 Valterra No-Fuss Flush with Check Valve
Video of Valterra No-Fuss Flush with Check Valve
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Valterra RV Sewer - Hose Adapters and Fittings - A70 Review
Today, we're going to be taking a look at the No Fuss Flush with built-in check valve. This is going to connect directly to the tank for easy hook up. It can be used for gray or black water tanks. It comes with the necessary hardware. It's just going to be three screws to get it installed. Now, drilling into the side or into the tank is required.
The whole diameter will need to be one-inch in diameter, and that's for this piece right here to fit through. In the instructions, they also recommend using clear silicone. That is sold separately, so you'll need to pick some of that up. Now, it's going to feature the internal check valve, and it's going to come with the quick coupler for easy hose attachment. This system makes it very easy to clean out your gray or black water tank. All you have to do is open the drain on the tank and let it empty, and then attach the water hose to the flusher, and flush the tank out for a couple of minutes, or until the water runs clear from the discharge hose.
This piece right here would go into the tank. This is your mounting platform. It's got three mount holes on it, it comes with the hardware to get that installed. This piece right here would thread in. This piece could connect to your hose and attach that way. It looks like you could also connect the hose directly to this piece right here.
It's got the threaded piece on there for easy attachment, but the couplers are included as well. That's going to do it for today's look at the No Fuss Flush with the built in check valve.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Valterra No-Fuss Flush with Check Valve - A70
Average Customer Rating: 4.9 out of 5 stars (32 Customer Reviews)
Tank flush helps clean out your black-water or gray-water tank. Check valve with backflow preventer keeps fresh water source free from contaminants. Permanent installation - connects to the waste tank and the outside wall of RV for easy hook up.by: Anthony 08/10/2022
Very easy to install-simple instructions took little time looks like it should
work good.
by: Garry D12/29/2019
It was a replacement for the unit that was on the motorhome and it works great
Comments
It was a replacement on my motorhome and fit perfectly it woks well
Garry D - 12/30/2020by: Rick 12/11/2021
Excellent product from etrailer. As described and on time, as always.
by: James07/24/2019
The no-Fuss valve was easier to install than I anticipated The accessary kit was another matter. The instructions are lame and I have had to cobble it together for my application. Other than that it's OK. etrailer is great as usual.
Comments
Works great!
James - 07/25/2020by: Lloyd06/11/2018
My son's toy hauler did not come with a black tank flush. This fitting is simple and it works. That is just what I was looking for. The spray pattern is perfect. The installation was easy, I dd not use the yellow quick connect portion though. I screwed a male hose adapter from chain hardware store and connected to a female hose adapter using PEX line.
by: Tom S. 06/09/2017
Great product. It was easy to install and does a really nice job of cleaning out your tank. I have a clear section on the discharge hose so I can see how much more stuff comes out after I rinse.
Comments
They are working great.
Tom S - 06/09/2018by: Joe 12/29/2021
Nice add on. I love these things
by: Greg 09/04/2021
Easy installation, works great!
by: Overland Mike06/04/2017
If you are looking at this item you've found the best place to buy it. Best price and service. Love etrailer.com.
by: Mike M.04/20/2019
Very happy with the black water tank spray. Works well does what it suppose to.
by: Mark07/27/2018
What a great product. I didnt know it existed until I browsed your website. Easy to install and makes cleaning our a toilet cassette a clean and simple job.
by: Robert 09/23/2020
Bought this to use in a new waste tank. It does a great job keeping tank clean. Our tank is 15 years old and after i allowed it to dry and removed it, the inside was remarkably clean!
by: Ron B05/03/2017
Everything came fast Happy with how fast items came. Would order again from
etrailer corp. thanks again
by: Martin 08/25/2021
Excellent product , gret customer servi ce
by: Ed06/10/2021
exactly what I wanted, shipping faster than reported!!
by: Edwin05/13/2018
Very easy install and works very well.
by: Kamil09/09/2016
Works great. Good investment, it makes a life a whole lot easyer.
by: Chris 08/09/2021
by: Valerie 11/27/2021
by: Craig 02/17/2021
by: Anthony L01/23/2023
Review from a similar No-Fuss Flush in RV Black Tank Cleaner
Middle of Winter here--- Will install in may or June! The first one worked
to clean the tank---This one for cleaning the old school sensors!
by: Tom 11/08/2021
Review from a similar No-Fuss Flush in RV Black Tank Cleaner
The product was on time and as advertis ed.
by: Martin 09/01/2021
Review from a similar No-Fuss Flush in RV Black Tank Cleaner
Looks like what I will need, I haven't installed it yet
by: Douglas08/23/2020
Review from a similar No-Fuss Flush in RV Black Tank Cleaner
Easy to install and excellent product.
by: randy b10/11/2016
Review from a similar No-Fuss Flush in RV Black Tank Cleaner
Haven't used it yet but it's the right part Thanks for the fast service
25
29
Show More Reviews
See what our Experts say about this Valterra RV Black Tank Cleaner
- Does Valterra No Fuss Flush Have a Check Valve Built-In?Yes, there is an internal, built-in check valve on the Valterra No-Fuss Flush with Check Valve # A70. I've added a link to a video review of this product for you to take a look at as well.
view full answer... - Installation Instructions for the Valterra No-Fuss Flush with Check ValveI spoke with my contact at Valterra and she informed me that the part # A70 would not leak for you and it has no moving parts. I attached a set of install instructions for this product that she sent me as well for you to check out.
view full answer...
- Installation Location of Valterra No-Fuss FlushWhen installing the Valterra No-Fuss Flush with Check Valve # A70 to your RV, you will want to drill the 1 inch hole that the No-Fuss Flush will install in at a location about 2 inches from the top of the tank, as near center as possible. This will be the ideal location for the jet stream spray that will remove and flush away tank deposit. I have also attached a short demonstration video on this product for you to check out.
view full answer... - Will the Valterra No-Fuss Flush with Check Valve Work With An Existing Flush SystemYes, there are multiple back check valves in a waste flush system. There is a check valve at the actual fitting on the tank and inside the vacuum breaker. If the hole on your tank has a 1"diameter which it should then the Valterra No-Fuss Flush with Check Valve part # A70 will work for you.
view full answer... - Selecting Hole in RV Tank to Install Valterra No-Fuss Flush with Check Valve # A70I'd recommend installing the Valterra No-Fuss Flush with Check Valve # A70 in the lowest hole so that all of the water will drain out of it.
view full answer... - What are the Hole Dimensions for the #A70GB, Rubber Grommet for 6-1/2 Inch Oval Trailer LightI went out into our warehouse and measured one of our Rubber Grommet for 6-1/2 inch Oval Trailer Light, # A70GB, that we have in stock. From the measurements I took, you will have to cut a hole that is 6-11/16 inches long and 2-5/8 inches tall.
view full answer...
- How To Remove Trailer Light That Has Been Riveted To TrailerThe way to remove a riveted item on yoru trailer is by using a drill. You want to use a drill bit that is smaller than the head of the rivet. This will remove the body of the rivet and then you can just easily pop the head of the rivet out without expanding the hole. I have attached a link to the trailer lights we offer. If you have any questions about a specific replacement just let me know.
view full answer... - Could the Rubber Grommet # A70GB be Installed in 5/16 in Thick MaterialThe Rubber Grommet # A70GB should have no problem being used in a material that is 5/16 of an inch in thickness as long as the hole is cut the proper shape. To see the dimensions that the hole will need to be check out the picture I attached.
view full answer...
- Rough Opening Dimension and Maximum Panel Thickness for # A70GB Lamp Mounting GrommetThe # A70GB grommet is meant to fit a 6-11/16 by 2-5/8 inch rough opening. The maximum panel thickness would be right about 3/16 of an inch.
view full answer...
- Size of Hole Needed to Install PVC Grommet # a70gb in Thicker Mounting SurfaceThe ribs of the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # a70gb do push further into the light assembly when you attempt to install on a thicker mounting surface. Since the ribs are on the top and bottom you'd just need to open the hold up to 2-5/8 inches vertically and the same 6-3/4 inches left to right and you'd be good. I attached an install video for this for you to check out as well.
view full answer... - Installing LED Tail Lights and Grommets in Trailer Mounting HoleWhen installing your new lights, you will first install the grommet # A70GB into the hole and then install the light into the grommet. This will ensure the grommet is properly seated in the hole and the light will be a snug fit. I've attached a video installation to further assist.
view full answer... - How to Install Tail Light and Grommet into Trailer Light Mounting Bracket # BK70BBI went out to the warehouse and pulled a # BK70BB bracket, a 6 inch oval tail light and the A70GB grommet. I found that it is much easier to install everything if you push the grommet fully into the bracket until it is fully seated and then push the light into the grommet until it bottoms out. At that point, you will have a fit tight enough that the lamp is securely held in place. Make sure the grommet is pushed FULLY into place before inserting the lamp.
view full answer... - How to Remove Grommet-Mounted Tail Light for Bulb ReplacementUsually lights that mount using a rubber grommet will need to be popped-out of the grommet to give you access to the lens for removing that part to allow for bulb replacement. You can push the light out of the grommet by moving it out from the grommet, toward you as you look at it. For instance, the red oval light # ST70RB from Optronics uses grommet # A70GB for installation. This light is a exact replacement for Truck Lite part 60202R and others as listed on the linked page.
view full answer... - Rubber Grommet For 6-1/2" Oval Trailer LightsThe correct grommet for the Optronics Trailer Tail Light # ST70RB you referenced is the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # a70gb. It's a direct replacement for Wesbar # 226088 Truck Lite # 60700 Grote # 92420 Peterson # 421-18 Bargman # 40-06-020 and will allow you to flush mount 6-1/2" oval lights. I linked the parts above, as well as attached a video for you to check out.
view full answer... - Is Optronics Trailer Tail Light # STL70RB Sold in Pairs or as a Single LightThe Optronics Trailer Tail Light # STL70RB referenced in your question is a single light assembly. If you need a pair of lights you will just need to order 2. For the rubber grommet you will use part # A70GB. I have attached an installation video for this assembly that you might also find helpful.
view full answer... - Brackets and Grommets for Boat Trailer LightsI've linked to a list of our trailer light mounting grommets and brackets. Which one you choose will depend on the dimensions of your light. For example, the Optronics Mounting Bracket, part # BK70BB, will mount 6-1/2" oval lights and requires a grommet, part # A70GB, to complete installation. It mounts on 6-1/4" centers, so the mounting area needed can play a part, too. I've linked to video reviews of both of these in the off chance that this is what you need. If you tell me your light's...
view full answer... - How to Install the Replacement Check Valve Tank Flushing System A10-3050The Replacement Check Valve/Vacuum Breaker for Factory RV Tank Flushing Systems part # A10-3050 can be used on either black or grey water holding tanks to protect fresh water supply from contamination. I have attached a photo for you which shows how you will plumb in the check valve. We also offer the Valterra No-Fuss Flush with Check Valve part # A70 for easy flushing of your black or grey water tanks.
view full answer...
- Can the Bulb in Light, Red Flush Mounted Sealed Turn Signal - Oval, # ST70RB, Be ReplacedThe Light, Red Flush Mounted Sealed Turn Signal - Oval, # ST70RB, is a sealed light and is not meant to be opened to replace the bulb inside. I went out to the warehouse and pulled one of these lights to double check and it is sealed. I then checked other lights with the same dimensions and they are all sealed as well. I would recommend going with an LED light since LEDs last longer than incandescent bulbs and draw less power. Take a look at the Sealed, 6-1/2 inch Oval LED Trailer Stop,...
view full answer... - LED Replacement for WESBAR 203561 LightYes, the Optronics Trailer Light, # STL70RB, will replace the Wesbar 203561 to upgrade to LED lights. You will want to check the factory grommet when you remove the light, if the factory grommet is in good condition you can use it with the LED upgrade. If the factory grommet is worn or shows any signs of damage, now is the time to replace it. You would use the Optronics Rubber Grommet, # A70GB. Same thing on the 3-prong plug connector, check it also to make sure it is in good condition....
view full answer... - Could the Optronics Light part ST70RB fit a 2016 Triton Wave TrailerI pulled up a picture of the rear of your 2016 Triton PWC trailer and the taillights look nearly identical to the part # ST70RB that you referenced. I am confident you could get this light to work with the mounting bracket part # BK70BB or the grommet part # A70GB. For a pigtail harness you would want the part # A45PB.
view full answer... - How to Cut a Grommet Hole for Installation of the Oval Trailer Tail Lights # BU70CBThe easiest way to cut the oval hole for the Rubber Grommet, # a70gb, to install the Optronics Light part # BU70CB, in my opinion, would be to use a Light Mounting Bracket for 6-1/2 inch Oval Trailer Lights, BK70BB, as a template and then use a hole saw the correct size to cut a hole on each end of the mounting location. Then, use a angle grinder with cut off wheel or a reciprocating saw with metal cutting blade to cut the straight top and bottom sides of the hole. The correct width for...
view full answer... - How to Install the ST70RB Red Oval Flush Mount Tail Lights on Trailer without Existing HoleTo install the part # ST70RB you could use the mounting bracket part # BK70BB to add a provision to your trailer and then use the grommet # a70gb.
view full answer... - Mounting Dimensions of the Optronics 6-1/2 Inch Trailer Light # ST70RBI took a few measurements for you that I think will help. I have attached a diagram and made a short video for you showing the dimensions and the light. I believe this light will work with your bumper without having to cut out a hole in the back of the bumper. When the light is mounted in the grommet, portion of the light that extends past the wall of the bumper will only be 1-11/32 inches. You should have no problem installing this in your 2 inch x 4 inch bumper.
view full answer...
- Could Optronics Clearance Light # ST70RB Fit Polaris PU5X16-RWI am sure you could fit the Sealed, 6-1/2" Oval Trailer Stop, Turn and Tail Light # ST70RB on your trailer but I couldn't find a decent enough picture of your trailer to determine if it does use a similar light or not. I attached a dimension picture though for this light for you to compare to what you have on your trailer to see if it's an exact fit or not. For a grommet to install this in a trailer flush (assuming yours is different) you'd want # A70GB. Or for a mounting bracket you'd...
view full answer...
Do you have a question about this RV Black Tank Cleaner?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate rv black tank cleaner information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Jameson C
Installed by:
Cole B
Written by:
Amy B
Updated by:
Halie H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.