bing tracking image
  1. RV Awnings
  2. Lippert
  3. Roller and Fabric Kits
  4. 21 Feet Wide
  5. Black
  6. Extends 96 Inches
Replacement Roller and Fabric Kit for 21' Solera Power and Hybrid RV Awnings - Solid Black
Lippert

Replacement Roller and Fabric Kit for 21' Solera Power and Hybrid RV Awnings - Solid Black

Part Number: LCV000211532
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$931.12
Retail:$1,452.88
You Save: $521.76
RV Awnings
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Solera 21' hybrid and power awnings that extend 8' from your RV. Installs more easily than replacing just the fabric. Great Prices for the best rv awnings from Lippert. Replacement Roller and Fabric Kit for 21' Solera Power and Hybrid RV Awnings - Solid Black part number LCV000211532 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (58)
  • Q & A (0)
  • Videos (1)
  • Photos

Lippert RV Awnings - LCV000211532

  • Roller and Fabric Kits
  • 21 Feet Wide
  • Black
  • Lippert
  • Extends 96 Inches

Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Solera 21' hybrid and power awnings that extend 8' from your RV. Installs more easily than replacing just the fabric.


Features:

  • Awning fabric and roller assembly replaces the old or damaged fabric and roller on your RV
    • Pair with your Solera support arms to create a complete awning
  • Heavy-duty, durable fabric is made with premium 13.5-oz vinyl
    • Cold-crack tested to -25 F
    • Heat-welded seams prevent leaks
  • Black roller tube comes with solid black fabric pre-installed
  • Simple installation with included hardware
    • Roller tube easily slides onto the head of each awning arm
    • Awning rail (LC715217 - sold separately) required to attach fabric to RV


Specs:

  • Application: Solera 21' hybrid or 12V, 18V, and Smart Arm power awnings with an 8' projection
    • 21' Width is measured from center of left arm to center of right arm
  • Dimensions:
    • Fabric: 20'1" (241") wide
    • Roller tube: 21' wide
  • Warranty:
    • 1-Year limited on awning roller
    • 5-Year on fabric


how to measure replacement fabric for RV awning

To determine what size roller and fabric you need, measure from the center of your Solera awning's left arm to the center of its right arm. You can also measure the width of your old roller and replace it with a roller that's the same size, but measuring the distance between the two arms will give you the most accurate dimension. Do not order based on the old fabric width, as it will be too short.


Can You Just Replace the Fabric on an Awning?

Can you replace just the awning fabric without the roller tube? The answer is absolutely yes - but do you really want to?


To replace just the fabric on your awning, you will have to disassemble your whole awning anyway, just like you would if you were replacing the roller and fabric assembly. When you get your new fabric, you will have to unfold it and let it lie out for a good while to get rid of the creases. Then you'll have to painstakingly feed the fabric into the roller tube and into the awning rail on the other side. Once your awning's put back together, you'll still have to extend and retract it multiple times, tweaking and tugging at it to try and get the fabric centered and wrinkle-free between the roller and the rail.


If you get the roller/fabric combo right from the get-go, it's going to make it so much easier. You just have to feed the other end of the fabric into your awning rail and attach the new roller to the heads on your awning arms. Roll the awning in and out a couple of times to get the fabric even and you're done. Save your weekend and get the roller and fabric kit.



V000211532 Replacement Lippert Solera Hybrid and Power Awning Roller Assembly - 21' Awning - 20'1" Fabric - Solid Black




California residents: click here


Video of Replacement Roller and Fabric Kit for 21' Solera Power and Hybrid RV Awnings - Solid Black

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Solera RV Awnings Replacement Roller with Fabric Review

Hello, shade seekers. It's Brad here at etrailer. And today we're taking a look at the solara replacement, roller fabric and awning for your camper. Now these are gonna be available in different measurements all the way from 10 foot, up to 21 foot, and also available in a variety of colors. Now we're gonna walk you through some of the standout features and also how to measure to make sure that you get the proper one. And we're gonna walk you through a typical installation as well.

So let's get started. So as you probably know, having an awning on your camper is great because it really does give you a whole lot of real estate. You can kind of move the party from inside the camper to the outside and that way everyone has space. And it's gonna protect you from that sun beating down in the summer months or a sprinkling occurring maybe in spring. Either way, you get to hang out with all your friends underneath the cover of the awning.

Now over time that sun can kind of break this down and being out in the elements, it can actually bend the rollers, or you can just get a mold buildup. Whatever it may be, you may wanna replace that. Well, without having to replace the entire system. You're actually able to do that with our replacement roller awning and fabric. When upgrading your awning, you can actually choose from a variety of different colors, including a solid white, a solid black, or you also have different fade colors.

Here we have our blue fade. There's also other fade available as well. Now the wind's kind of playing havoc here on our awning today, but you can see this little overhang that's gonna be really nice for when it rains. It's actually gonna have that rain running off rather than channeling back. Now also, it does give you a little bit of extra shade as that sun can be at a certain angle that might block that out a little bit better.

The fabric used on the solara. It really sets it apart from other competitors. Reason being, the fabric is anti scuff, anti mildew, and it holds up generally better than other ones on the market. Now it's also cold crack protected to negative 25 degrees Fahrenheit. So even if you're storing it over winter, should hold up for a long time. Many times when these are retracted back, if there's hunting moisture, that's not gonna really be able to breathe out. So sometimes that mold and kind of just brown spots will start to form on this while having that anti mildew buildup is gonna keep this looking nice for a long time. Now, keep in mind that the replacement roller and fabric is not gonna actually include the arms. So you need to make sure that you already have your existing arms and you can actually replace just the fabric. But sometimes that can actually be kind of tricky as it does wanna roll up. This is pretty drop in and go, and it replaces your old actual system. Now, why would you replace the roller Well, our customer that came in today, you'll see in our installed portion, actually had a dip in the roller causing it to kind of be uneven as it extends and retracts. So here we have it actually retracted all the way back and you can see it looks great. It follows the roofline very well. It's got a nice white color and it looks just fresh having that new awning up there. So now as we actually extend, you can see it's a nice smooth operation and it's gonna give you that coverage within a minute or so of rolling out. So now with this out, the sun's not blinding me and I can actually hang out here and enjoy the outdoor space. The only thing missing is some friends, some chairs, and some cold drinks. Getting a new roller and fabric already attached is gonna make that installation a nice and quick, easy one for you to do. The first step that you're gonna wanna do is measuring your actual arms from center to center. Now it is gonna differentiate from the actual measured size of the roll itself of the awning. So first get your measurement of your arms and you are gonna need an extra set of hands for a lot of the steps here, as well as a few ladders, because we're gonna be working at height and also having something that's extremely long. It's gonna be nice to have that extra set of hands to help you get it in place. You put that . So with our measuring tape center to center on the arms, we are right at 18 foot. Now this is what you're actually going to be using when you place your order on the roll itself. So the roll is gonna be a little bit shorter than that overall 18, but you're gonna be going off the center point of your arms when placing that order. So once you have your arms extended out a little bit, you're gonna want to make sure that they're supported and not going to actually open up anymore. I feel like the best way to do that here, is we're gonna run some zip ties just around where our strut is here. And that's just gonna kind of keep this bound up and that way it's not gonna move up. So grab some long zip ties and go ahead and secure those up. Maybe you have a bungee cord or something along those lines. It's pretty much just gonna be kind of our fail safe here to kind of keep that from falling out. So you can see that is supported. Go ahead and do the other side as well. So now we're gonna wanna go ahead and take our covers off. And these are attached just by some Phillips head screws. So we'll go ahead and remove those. Now, make sure that you hold onto all your hardware as you're gonna need that for re installation. Now on the inside, you're gonna see that there are some slots and you can put a small flat head in there, but I was able to kind of just press that plastic to separate the clips, have a few of them there, and then your face should come off. This back one should also just kind of slide up here. Now, make sure you are holding onto that hardware that was in those holes there. Now we can go ahead and repeat that same process on the other side. So now we're going to be taking off this square head screw here, and that just attaches it to this arm. So we're gonna be taking that out. Now, you're gonna wanna be careful because it might not be supported. So I actually have an extra set of hands here in the middle and that way, if it does start to move, we at least have that supported weight-wise. So let's go ahead and take this out. Once you have your screw out, we're gonna go ahead and repeat that process on the other side. So now you're gonna wanna look here in the channel. There's gonna be a screw that's run through there, and that's just to kind of keep this from moving around. Go ahead, ours is a Philips head, go ahead and remove that. And there's gonna be another one on the other side as well. So now you're going to wanna have a few extra sets of hands with ladders because we're gonna be sliding this out. So makes sure that you have an ample space to go either forward or back. Either way, we're gonna be taking this roll out. And first step is gonna be separating it here. Now be careful because this can be tension. This should just slide out like that. This one doesn't feel like there's a whole lot of tension on it, which is good. You may have to kind of wiggle it, but then you should have it come out. So make sure you're separated from the other side. And then you can kind of work this down. Got it. So we're gonna be feeding our new one back in just kind of the opposite way that we took it out. But you can see here, this channel has a nice bend here and that's gonna just make it easier to actually fit that piece into the slide. So if yours doesn't have that, you might wanna just grab just spare pliers and kind of bend that down just to make that channel a little bit easier to load that in when you have it supported. So now orientation wise, you're gonna wanna make sure that the actual part that we're sliding in, it's flat there and curling around in that way, it's not gonna trap stuff as it rolls up. And I'm gonna just peel these off as we go one by one. So just get that black tube fed into there. And you're gonna wanna have someone here, kind of following this to make sure that it's going in without catching that metal. And then as you're working along, you're gonna have some support down there and just feed it in. So while feeding it down, my help Kevin down there, he already put his in the slot, we're gonna do the same things that way it's supported. And you're gonna see this white hole needs to align with the hole here on the actual arms. Now you may have to kind of wiggle this back and forth 'cause it is slotted. So you want that to line up properly. And part of that might be accomplished by pushing that arm back just a little. And then once you get those holes in line, we'll be able to put our hardware back in. And then we'll go ahead and do the same on the other side. Now, we're gonna wanna put our screws back in that channel to hold it in place, but we also wanna make sure that it's actually centered up. So I'm gonna just measure here from our bracket to the end of our canvas here, and that's gonna be three and a half inches. So I'm gonna double check the other side, make sure that it's the same, and then we can get that extra screwed in. So I've gone ahead and got these centered up. So now I'm gonna go ahead and put our self-tappers back in where we had them. Now we'll be putting our caps back on. Now these are actually side specific. You're gonna have this cutout here and also this hole here, and that's gonna be on the drive side. So you can see this little nut here. That's gonna fit into that hole. And then your backside here should align pretty easily. So go ahead, you can get this installed and this should slide in. And then this should cap around it. Now let's go ahead and we'll take our support. Zip ties off, and we're gonna actually test this to make sure that it's working properly. So it looks pretty great extended. The real test is gonna be when we roll it back up. We're gonna be looking for any seams. And that could be just the tension of it being slightly off from one side to the other. So as you roll it up, you might wanna just to have an extra set of eyes, keeping look to make sure nothing's binding up. So now we can see we have our arms fully retracted, and you're gonna see that there's no weird tension going on. A lot of times you'll see wrinkles if they are offset. And if that's the case, you're gonna wanna adjust it kind of side to side and finding that sweet spot. That way it's not gonna have a crease down it. And it's also not gonna have odd tension on either side of the arms. Having this balanced out, it looks like we have our install done incorrectly. And that was a look and installation of the solara replacement awning roller and fabric. Thanks for watching..

Customer Satisfaction Score:


Customer Reviews

Replacement Roller and Fabric Kit for 21' Solera Power and Hybrid RV Awnings - Solid Black - LCV000211532

Average Customer Rating:  4.7 out of 5 stars   (58 Customer Reviews)

Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Solera 21' hybrid and power awnings that extend 8' from your RV. Installs more easily than replacing just the fabric.

by:

It has only been one year, but so far so good. It fit on well,seems an exact duplicate. I dont expect too much from the awning material for the price I paid. I realy needed the roller, but the roller came with the awning, so good deal. The roller seems like very good quality.Definitely worth the price.



by:



by:

Typically people buy these for RV installations or replacements, I’m an avid RV’er and like most of us have awnings on our rigs. I decided why not on my house too! They’re easy to install and adjustable to give us the summer shade on the back of our house which faces due West. The only thing you need to do is buy a 115vac to 12vdc converter that can handle up to 80% of 30amps. Plenty of those are available. Using the Lippert “smart” arms also provide additional flexibility.



by:

Solera 15 ft awning roller and fabric. Everything worked fine. Easy to replace. Fabric not up the quality of original fabric, so not sure how long it will last.



by:

This awning is a better quality than the original. It was very easy to replace even though we aren't professionals. Take note of how the original was set. Read the instructions. Easy! Thank you, etrailer!



by:

This was an exact replacement for a 10 year old camper/awning. etrailer had the materials in stock and the web site was easy to order from. I did note on the tracking info that there was damage reported early in the shipment. When the package arrived at the local terminal I received an delivery scheduling phone call. We discussed the note in the shipping history (the scheduler even sent me a pic from his cell) and I was able to convince the shipper to reject prior to delivery thus saving a good deal of hassle. A phone call to customer service at etrailer explaing the circumstance yielded a quick shipment of another awning. The awning came in a couple days and I was able to get it installed prior to a major trip.

First class customer service from etrailer!
Perfect part installed in about an hour.



by:

I am extremely happy with my new awning. My original awning was destroyed by my own neglect. ETRAILER.COM was great, ordered a new awning unfortunately came in damaged. Contacted ETRAILER.COM sent a couple of pictures, and they sent me a whole new awning. With thier videos and instructions, it was extremely easy to install. I will recommend them to anyone that needs a new awning. Thank you ETRAILER.COM!



by:

The awning is made very well. The end caps would not work on my arms. I was able to use the ones from my old tube. The length of the tube and material was 3 inches shorter than the awning I replaced. I had to modify it and add a piece of metal to make it wide enough so it would retract and line up with the arms. It is working fine. I was given conflicting information from e-trailer about if it would work with my current frame. I had no other choice but to modify and make it work.



by:

I will recommend etrailer for all. everything I order came with in the time. I was very happy with the free shipping offered.



by:

Excellent product installation was a breeze thank you all



by:

just what I needed



by:

Awesome product.Thanks to Bob and his crew for the great install. See the install video.



by:

I could not use it I thought it was a compete kit but it was just the fabric and drum and I was going to return it but the return cost was as much as the awning. But the service was great just could not use it.



by:

The tube was a little damaged but the awning was in good shape.
Thanks for the speedy service.



by:

This awning was super easy to install an was good quality. Definitely a two person job but went on in less than 15 minutes. Again etrailer knocked it out of the park.



by:

I think I may have,ordered the wrong product. I have a power awning and this appears to be for a manual system. Going to attempt to use the motor off existing tube. Thanks



by:

shipped fast and no damaged



by:

Great add putting the electric awning on my rig. Reasonably easy to install and works great. Love the adjustable extension arms to lower a corner to run water off in one direction.



by:

Again, package opened but not damaged, not installed yet



by:



by:

Just what we needed to complete the rep air.



by:

It took awhile to get just like so many other thing these days but looks great.



by:

Sales representatives were very helpful.



by:

Paul goes out of his way to inform me the parts are in route.



by:

Fit perfectly, easy install with 2 or 3 people, works great.


25
58
Show More Reviews

See what our Experts say about this Lippert RV Awnings

  • Can the Replacement 21' Wide Roller w/ Fabric LCV000211532 Replace a Solera V000211531
    Yes, the Replacement 21' Wide Roller w/ Fabric for Solera RV Awnings # LCV000211532 (V000211532) will work to replace the Solera V000211531 ( # LCV000211531 ). The only difference between these two models is the color of the fabric. The # LCV000211532 is solid black and the # LCV000211531 (V000211531) is a black fade.
    view full answer...
  • Replacement Awning Options for a 21 Carefree Spirit FX Awning
    If your 21 foot Carefree Spirit FX awning currently mounts with industry standard fittings then you will simply need a Solera awning. We have a variety of different colors you can choose from our 21 foot Long x 8 foot Wide Solera awnings. The choices include: White Fade - # LCV000254845 Sand Fade - # LCV000266033 Sand Fade w/Black Weather Guard - # LCV000255587 Black Fade - # LCV000211531 Solid Black - # LCV000211532 None of these come with the equipment needed for a manual Solera system...
    view full answer...
  • Recommendation for Adding a Complete Awning to an Enclosed Trailer
    For your 28 foot enclosed trailer, I'll give you the recommendation for parts all in the color black, but other color options are available and easy to find once you have the list of parts needed. Let me know if you need help with colors or have any questions based on my recommendations. To start, I recommend the Solera 21' Solid Black RV Awning Roller and Fabric (Std) # LCV000211532. This will be the fabric and the roller bar and is the longest length we currently carry. To hold that...
    view full answer...
  • 21-Foot Solera Awning for Food Service Trailer
    Your photo did not come through to us but we can still help you select a suitable awning for your food truck trailer. It sounds like your trailer already has an awning installed and you are looking for replacement fabric; the item you referenced, Solera 21' Solid Black RV Awning Roller and Fabric # LCV000211532, is a replacement fabric/roller kit, not an entire complete awning kit. This awning fabric is compatible with awning setups from Solera, A&E and Carefree of Arizona. For support...
    view full answer...

Do you have a question about this RV Awning?


Info for this part was:

Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Adam R
Expert Research:
Adam R
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Amanda K
Updated by:
Amanda K
Employee Kristen H
Written by:
Kristen H
Employee Bradley B
Installed by:
Bradley B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.