Solera RV Slide-Out Awning - 85" Wide - White
(1009 reviews)
Price: $390.52
Solera RV Slide-Out Awning - 85" Wide - White
Item # LCV000163287
Our Price: $390.52
In-stock alternatives that can ship today
- All Info
- Reviews (1009)
- Q & A (0)
- Photos
Lippert RV Awnings - LCV000163287
- Slide-Out Awnings
- 80 Inch Wide
- 81 Inch Wide
- 82 Inch Wide
- 83 Inch Wide
- 84 Inch Wide
- 85 Inch Wide
- White
- Extends 48 Inches
- Lippert
Protect your RV slide-out from debris and keep moisture out of your siding to prevent water damage and mildew with this slide-topper awning. Made for slide-outs that measure up to 7'1" from edge to edge. Includes all necessary components.
Features:
- Slide-topper protects your RV slide-out from leaves, debris, and pooling water
- Prevents damage and mildew
- Helps keep RV interior cool by providing shade from the sun
- Awning automatically extends and retracts with your slide-out
- Heavy-duty, durable fabric is made with premium 13.5-oz vinyl and won't crack in cold temperatures
- Heat-welded seams prevent leaks
- White awning fabric matches white hardware
- Simple installation with included brackets, hardware, and awning rail
- Made in the USA
Specs:
- Application: slide-outs 80" - 85" wide with 48" extension
- Minimum 7" of clearance needed on both sides of the slide-out - order next size down if needed
- 2 Slide-outs next to each other need 14" total clearance between them
- Awning dimensions:
- Awning rail: 85" long
- Awning fabric (when fully extended): 85" wide x 48" long
- Bolt hole diameter: 3/16"
- Mounting bracket dimensions: see below
- 1-Year warranty
How to Measure for an RV Slide-Out Awning
To ensure you get the correct size awning for your slide-out, measure from outer edge to outer edge of the trim. You will need 7" of clearance on both sides of the slide-out for the awning. If you dont have 7" clearance on both sides, go down to the next size; this will still give your slide-out plenty of coverage.
If there are two slide-outs next to each other, you will need a total of 14" of clearance between them for them both to have a slide-out awning. Again, you can go down a size if you are low on space.
Protect Your RV Slide-Out
Without a slide-topper, the roof of your slide-out room is continually exposed and can accumulate leaves and bugs and different types of debris. That debris can build up along the rubber strip at the top of your box, preventing a firm seal when your slide-out is retracted. Rain water can then get in and pool on the top of your slide-out. If you don't clear the water off each time it rains, mold can begin to form. And when your slide-out is pulled in, that mold gets inside your RV.
The Solera RV slide-out awning alleviates those problems by serving as a protective covering over the top of your RV's slide-out. Not only does it prevent debris from collecting on the roof of your slide-out, but it keeps water from pooling and potentially causing damage down the road. Because it mounts directly to the front of the slide box, the slide-out awning is able to automatically extend and retract every time the slide-out room is extended or retracted.
Durable Vinyl Fabric
The durable awning fabric holds up to the rigors of the outdoors. It's made of premium 13.5-oz vinyl, which is an upgrade over the 10-oz fabric used in many awnings. This fabric also features heat-welded seams to prevent leaks. And it is made to withstand cold temperatures down to -25 degrees Fahrenheit, so it won't crack or degrade during the winter.
Simple Installation
Use the self-tapping screws to secure the included access plate to the side of your slide-out, positioning the plate at the bottom of the T-molding. The two access brackets slide easily onto the access plate's track. The rods that are located at each end of the roller tube, which comes with the awning fabric already mounted, slide through the hole in the two access brackets.
The included awning rail is used to anchor the other side of the fabric to your RV. This rail can be mounted up to 5" above the trim on top of your slide box.
V000163287 Lippert Solera 7'1" Slider (Slide-Topper) in White w/ White Hardware
Installation Details
California residents: click here
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Missing parts
Customer Reviews
Solera RV Slide-Out Awning - 85" Wide - White - LCV000163287
Average Customer Rating: 4.6 out of 5 stars (1009 Customer Reviews)
Protect your RV slide-out from debris and keep moisture out of your siding to prevent water damage and mildew with this slide-topper awning. Made for slide-outs that measure up to 7'1" from edge to edge. Includes all necessary components.by: Randy04/17/2022
Great product. Very timely delivery. Installation was a breeze. Looking forward to the added protection this provides my slide out.
Comments
I continue to be very happy with this awning. It kept my slide out nice and dry throughout the season last year. It is everything I had hoped for.
Randy - 04/18/2023by: Thomas01/18/2023
Instructions could have been clearer. Especially the last part, with regard to proper spring tensioning. Upon first effort, the tension was too tight and it really taxed the slide-out machinery to extend the room. I did a partial disassembly in order to roll out some slack, and now it all works quite well. Would have been nice, also, if the manufacturer had provided a few spare screws, especially those tiny ones that drop to the pavement/ground and require lengthy search missions to retrieve.
by: Craig06/28/2023
Product was very good. Slight blemish due to shipping wear. I would suggest adding to the videos that you should open both ends of the channel slightly. During the installation we went about 2 inches beyond the end of the channel with the fabric and had a tough time getting it back in the channel. Overall, very satisfied with the product and the videos for training and installation help.
by: William03/27/2023
The instructions were terrible on the installation. It is not installed correctly as water doesn't run off I have to put the slide out in every time it rains.
Comments
You may need to contact the manufacturer for some assistance in the installation correction.
-- 
Katrina B - 04/13/2023by: Chris03/20/2021
Good product, installation was straightforward. Great addition to our trailer. Only issue has to due with trailer trim which made the arms have to be extended extra long.
by: Richard05/23/2019
This was just as the web page described. The size, fit was very good and it was easy to install. The video provided good install process. My slider is 82.5" I added 5" to it making it 87.5" divided that by 12" and ordered the 7' 6" topper. The material of the topper measured 7' 1/4" just as I was told by the sales rep.
I am very happy with this topper.
Comments
No problems with this topper it has worked perfectly.
Richard D - 05/24/2020by: Philip03/01/2023
It fit, but it only has one bead at the roller instead of the two on the original dometic fabric. It also has two at the coach side which is stupid. I will use it until it needs replacing but will never buy another one.
by: Christina03/15/2023
Easy installation, staff was extremely helpful. Great product and company, would definitely recommend.
by: Rich08/28/2022
The only thing I do not like is whatever film comes off the awning and on the the camper is not easy to clean , pretty much every time it rains you have to clean your camper from whatever comes off the awning, white awning white film on your camper.
Comments
Have you tried using a light detergent and washing off the topper?
-- David B - 10/03/2022by: Robert 10/29/2022
Looks great, works great. Good installation videos. And Dianne A. makes the entire process pleasurable.
by: Stevieray410006/18/2021
4 stars for etrailer but not for Lippert. etrailer handled this very well. The slide topper I ordered was damaged by the shipping company UP-something mostly in part because of mishandling but also the lack of Lippert not packaging the product to best protect it from miss handling. Once I reported it to etrailer they went into action and sent a new one within 2 days of my contacting them. This is an example of excellent customer service and taking care of customers. The second slide showed up and again had some minor scuffs from the shipping but this again is due to Lippert's inability to properly protect the ends from this type of damage.Thank you etrailer and I look forward to doing more business down the road for my needs.
by: Gregory 02/02/2023
Etrailer service is the best.
by: Stephen10/13/2018
Great!! Jessie very helpful. Didn't have time to install during summer - just completed today -ready for next year. One screw short for track -no problem had some s/s ones.
Thanks again, sjw, Sechelt, B C
by: George10/20/2018
There was a confusion on the “real” size awning I needed, but etrailer.com went beyond what I exspected and sent me everything I needed to complete my install. It was so easy I was able to complete the installation without any help. Thanks, George
by: Peter G07/28/2017
Very well-made only took about 2 hours to install seems to work perfectly, excellent customer service and shipping as with everything I've ordered. Thank you very much.
by: Gregory04/03/2022
Have’nt compared the products to other products but they seem to be good quality and work well, good instructions and was easy to install have purchased the same items from you since them
by: Randy Buchanan05/28/2018
The product was easy to install. I install awning by my self. Might order ok next for the other side. Keeps water and debris off side out
by: Aikman01/14/2023
It fix just like video showed
by: Dale P.06/25/2018
Just put this on trailer. Slide awning seems to be of good quality and was easy to install. Took my wife and I and two ladders about hour and a half. Since we do most of our camping in forest with dropping pine needles and acorns this should keep top of slide clear of debris.
by: Thomas06/25/2019
Great product that was received fast. I haven't installed on my RV yet but with the instructions included should be no problems. 5 stars for product,service and shipping.
Comments
The awning still looks new. Still working perfect. Thanks for a great product.
Thomas B - 06/25/2020by: Richard10/08/2018
I installed this slide topper a year ago and it has functioned flawlessly. Also, Etrailer had the best price I could find....two thumbs up!
by: Chris 05/26/2021
The topper worked out perfect and etrailer was exceptionally easy to work with. I highly recommend them.
by: Tim B06/25/2020
Very pleased with awning, keeps water , snow and ice off of our slide out.
by: Ray H10/20/2017
Nice product easy install will wait to see how it holds up to the weather. Customer service from Etrailer is exceptional. One of the units was damaged in shipping but they replaced it quickly and arranged for pickup.
by: Keith08/26/2019
Very happy so far. The installation video has very helpful.
From start to finish it took about 90 minutes. Make sure to have a helper.
Thanks.
25
873
Show More Reviews
See what our Experts say about this Lippert RV Awnings
- How to Select the Correctly Sized AwningThere is a way to find an awning for your 2018 Coachmen Clipper 106, though we do not have any specific parts for years, makes and models of trailers. To find the correct awning you need to select the fabric size that will extend at least 2-1/2" beyond each slide of the width of your slide box. For example, the Solera # LCV000251461 is 120" wide and has a box width range of 110" to 115-3/4". I've added a link to our entire selection of awnings for you to check out.
view full answer... - Do Solera Slide-Out Awnings Come with Everything Needed for InstallationThe Solera 7.5' Slider (Slide-Topper) # LCV000163287 does come with everything needed for installation. No other parts are required. I have included a link to a video covering the features of the Solera slide-out awnings.
view full answer... - Will the Solera Slider (Slide-Topper) Fit a 4.5 Inch Tall FlashingThe height of the torsion arm will play a part in determining if the 4.5" flashing you have on your RV will work with the Solera 7.5' Slider (Slide-Topper) in White part # LCV000163287. However, this will be very difficult to measure as the position that the awning rail is placed will also play a large factor. I recommend placing the awning rail along the line where the roof and wall meet instead of the minimum 3" above the upper edge as this should give you the necessary clearance you...
view full answer... - Is Solera 7.5' Slider (Slide-Topper) # LCV000163287 a Complete KitThe Solera 7.5' Slider (Slide-Topper) # LCV000163287 is a complete set. No other parts are required for installation. I have linked a video review of this series of awnings for you.
view full answer... - Dimensions of the Lippert Slide-Topper Mounting Brackets for # LCV000163287My contact a Lippert Components confirmed with me that the mounting bracket on the Lippert Solera Slide-Topper Awning, # LCV000163287, measures from the center of the top rivet hole to the bottom of edge 1.050 inches. The bracket will mount as close to the top trim of the slid out on you trailer, so from the bottom of this trim to the bottom of the mounting bracket will be no more than 1 to 1.5 inches. This will be enough clearance for the slider to mount to the slide out between the...
view full answer...
- Does the Drip Rail Need To Be Removed To Install a Solera RV Slide-Out AwningYes, the Solera RV Slide-Out Awnings like part # LCV000163287 which fits 80" - 85" wide slide-outs (flange to flange) will require that you remove the drip rail. However, the Solera RV Slide-Out Awning will take the place of the drip rail in regards to function so you should not have any worries here. If you wanted, you could reinstall the drip rail above the awning but this is not really needed.
view full answer...
- Can I Slide Topper be Used on a Slide Out with an Awning?Thanks for the question! When adding a slide topper there are time we can put these on a camper that has an awning already on the slide and times that we can't. In your case there isn't the 4" of room we would need to put it on. The topper requires that brackets be put on the top right and left of the slide below the trim flange that sticks out slightly from the slide. It appears that on your Keystone Cougar 34 TSB that the awning is at the very top edge of that topper (so it can clear...
view full answer... - How Do the Solera RV Slide-Out Awnings Perform In the WindThe Solera RV Slide-Out Awnings will hold up in heavy winds as they have a pre-set tension to reduce billowing and they are made of a much heavier fabric (13.5 oz) which has a five year warranty. Therefore, there should not be too much of a concern with the awning holding up in strong winds. In regards to travel, there is not any sort of cover for the slide topper but again the pre-set tension system is going to prevent wind from getting under the fabric and causing tears. The Solera...
view full answer... - Slide Topper for Slide Out that Measures 82-3/4 inchesSince your slide out awning is 82-3/4 inches in width the correct slide topper you'd need is the part # LCV000163287.
view full answer... - Slide Out Awning for 80-3/4 Inch Slide for 2019 Aura Trail Lite 22RFThanks for the photo and you are right about the fit for the 80-3/4 inch slide on your 2019 Aura Trail Lite 22RF; the correct one is the Solera RV Slide-Out Awning # LCV000163287. The exterior framing piece is not something I believe is going to be an issue for the install. The brackets should go inside and under that framing piece, and it doesn't look as if it extrudes outward so that it will interfere, so I don't foresee any issue at all. In regards to the awning rail, you just want...
view full answer...
- Can an RV Slide Topper Fit Under AwningIt's not uncommon to have a slide topper installed below the awning of the RV if the awning happens to be over the slide out. As long as you have room for a rail to fit under the main awning rail this would be totally fine. To pick out the correct slide topper you need to measure the width of your slideout including the flange that goes around the outside of the slide out. If that dimension is between 80 and 85-3/4 inches the Solera 7.5' Slider (Slide-Topper) # LCV000163287 that you referenced...
view full answer... - Adding Slide Topper to Slide Out That Has an Awning - Is there room?The access plate is 2-15/16" wide and 7-5/8" long and must be mounted on the slide out's outside wall as far up as it can, but not mounted on the t-molding. The t-molding is what looks like 6" wide trim around the outside slide out wall. I have attached a *.PDF document showing the installation method for Lippert Solera Slide Toppers. Once the access plate is installed the acces bracket slides on by the channels in teh bracket. Note that it can slide on by a high or low position. I have...
view full answer...
- How Much Clearance is Needed to Install Solera Slide TopperAll of the our Solera Slide Toppers like the part # LCV000163287 that you referenced require at least 7 inches of clearance between the slide out box and other items on the side of the RV like awning rails or doors. If you have 7 inches of clearance on both sides and the flange width of your slide out is between 80 and 85 inches this would fit and work great.
view full answer... - How Much Clearance Above Slide Out Does Slide Topper NeedWe've asked Solera in the past about how much clearance above the slide out would be needed for a slide topper to fit and they have said in past that between 3 and 6 inches would be fine so your clearance of 4-3/4 inches would be more than adequate. I attached a link to the install instructions to this page but even more helpful is I attached a link to an install video that will walk you through the entire process.
view full answer... - Solera RV Slide-Out Awning for 2012 Keystone Cougar 27SABYes, you can add a Solera RV Slide-Out Awning such as the, # LCV000163287 to your 2012 Keystone Cougar 5th wheel RV. For determining the proper size Solera Slider you need, measure the total width of your slide room from the outside including the flange then add about 5" (2-1/2" each for the left/right side overhang). You can have greater than 2-1/2" overhang if you want, but it is suggested that you do not go any less than 2 to 2-1/2". It is recommended to have at least a 3" slope to...
view full answer... - Slide-Out Awning for a 7' Slide-OutYes, a 7'1" slide out awning will fit. The Solera RV Slide-Out Awning # LCV000163287 is a 7'1" slide-out awning that works with RV slide-outs measuring 80"-85" which will work for your 7' slide out which makes it 84". You need at least 7" of clearance on both sides of your slide out box, so as long as the 8" from your awning is the same on both sides this slide-out awning will work out great for you.
view full answer... - Recommended Slide-Topper for 84 Inch Box Width on TrailerWhen picking out the correct size Solera Slide-Topper, the most important measurement to consider is your box width. This is measured on the outside front of the box, including the flange. If your 84 inch measurement included the flange, then you will want to go with the Solera 7.5 Foot Slide-Topper # LCV000165062 for Black w/ Black Hardware or # LCV000163287 for White w/ White Hardware. This size awning is perfect for box widths of 80 inches to 85-3/4 inches and will give you the needed...
view full answer... - Slide Out Topper Function and Waterproof CompatibilityAll of our Slide-Out Toppers like # LCV000168105 you referenced are made for rain, sleet, and snow. The toppers are made to keep debris and water away from the top of your slide to prevent issues with the slide out. The topper width will be a minimum of 5 inches past the slide (2.5 inches on each side) to help further prevent the water and debris from sitting on top of the slide. The awning fabric is anti-scuff and anti-mildew and is cold-crack protected to -25 degrees Fahrenheit. The...
view full answer... - Recommended White Slide-Topper for a 7 Foot Long and 13 Foot Long Slide-OutAbsolutely! For the 7' long slide-out you would want to use the Solera 7.5' Slider (Slide-Topper) in White part # LCV000163287 which fits a box width range of 80" to 85-3/4". For the 13' long slide-out you would want to use the Solera 13.5' Slider (Slide-Topper) in White part # LCV000163300 which fits a box width range of 152" to 157-3/4". The box width range is measured from the outside of each flange on the slide-out. Both of these slide-toppers come with white fabric and hardware. They...
view full answer... - How to Pick Out Slide Out Awning Length for RVIn order to pick out the proper awning fabric length you want to select the size that extends a minimum of 2-1/2" beyond each side of your slide box width. So if the width of your slide out including the flange was 81 inches you'd need the 7-1/2 foot length like the # LCV000165062 for black or # LCV000163287 for white.
view full answer... - Recommended Slide-Toppers for 85 Inch, 83-1/2 Inch and 85-3/4 inch Wide Slide-OutsFor your 5th-Wheel Trailer, I recommend using the Solera 7.5 Foot Slider (Slide-Topper) in Black with Black Hardware # LCV000165062 or White with White Hardware # LCV000163287. This slider is 90 inches wide and has a box width range of 80 inches to 85-3/4 inches. The box width is measured on the outside front of box, including flange. Awnings for slide-outs need to extend 2-1/2 inches beyond each side of the slide-out so that they are several inches longer than the slide-out they fit....
view full answer... - Slide-Out Awning for a Dutchman Denali with 10 Foot Wide Slide-Out BoxTo order the correct Solera Slider, select the fabric size that extends a minimum of 2-1/2" beyond each side of your slide box width. Box width is measured on the outside front of the box including the flanges. Also keep in mind that you will need 6" of clearance beyond the outside edges of the box to accommodate the overall length of the assembly. If 10 feet is the outside width of the slide-out including the flanges then you would need to look at 10-1/2 foot awnings such as # LCV000163293....
view full answer... - How Much Does the Solera Slide Topper Awning Stick Out On Each SideIn regards to the Solera Slide Topper Awnings, the overall width is actually adjustable so I don't have an exact figure for you. This is because you can slide the hex extension rod in and out of the support arm bracket. The correct way to choose a Solera Slide Topper Awning is to measure from the outside edge of each flange on your slide out. The support arm will then stick out a minimum of 3" past the outside edge of each flange. I have attached a photo for you which shows this. If the...
view full answer...
- Slide-Out Awning for Slide-Out that is 79-3/8 Inches WideIf it were me I would err on the side of caution and go with the 7-1/2 foot model # LCV000163287. Otherwise you run the risk of not having enough coverage over the slide-out.
view full answer...
Do you have a question about this RV Awning?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Chelsea B
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
Written by:
Kristen H
Test Fit:
Shane H
Test Fit:
David F
Test Fit:
Kevin C
Test Fit:
Bradley B
Video by:
Jonathan Y
Video by:
Schuyler H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-636-747-0818
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.