1. Propane
  2. JR Products
  3. Thread Sealants
Thread Sealant Tape for Gas Lines

Thread Sealant Tape for Gas Lines

Item # 37207-30025
lowest price pledge
Our Price: $11.90
You Save: 43%
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.1 lbs
In Stock
Thread Sealant Tape for Gas Lines 37207-30025
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Sealant tape is used to tighten and seal gas fittings.This tape is UL/ULC approved to 1,000 psi and has a temperature range of -450 F - 500 F. Measures 1/2" wide x 236" long. Lowest Prices for the best propane from JR Products. Thread Sealant Tape for Gas Lines part number 37207-30025 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (2)
  • Q & A (24)
  • Videos (2)
  • Photos
  • Why etrailer?

JR Products Propane - 37207-30025

  • Thread Sealants
  • JR Products

Sealant tape is used to tighten and seal gas fittings.This tape is UL/ULC approved to 1,000 psi and has a temperature range of -450 F - 500 F. Measures 1/2" wide x 236" long.


  • Gas sealant tape is used to tighten and seal gas fittings
    • Allows the male threaded pipe to turn deeper into female threaded pipe fittings and fills irregularities in the threads preventing leaks
    • Commonly used to identify natural gas pipes
  • UL/ULC approved to 1,000 psi
  • Temperature range: -450 F - 500 F
  • Dimensions 1/2" wide x 236" long
  • Non-toxic
  • Corrosion resistant
  • Made in the USA

07-30025 JR Products Sealant Tape for Gas Lines

California residents: click here

Video of Thread Sealant Tape for Gas Lines

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Review of JR Products Tools - Adhesives and Sealants - 37207-30025

Customer Reviews

Thread Sealant Tape for Gas Lines - 37207-30025

Average Customer Rating:  5.0 out of 5 stars   (2 Customer Reviews)

Sealant tape is used to tighten and seal gas fittings.This tape is UL/ULC approved to 1,000 psi and has a temperature range of -450 F - 500 F. Measures 1/2" wide x 236" long.

- 37207-30025

- 37207-30025


Ask the Experts about this JR Products Propane

  • Parts Needed to Connect 100 Lb Tank with POL to On-board 5th Wheel Regulator Pigtail
    You could technically use the Propane Adapter Fitting # 204128-MBS to convert the POL fitting on your 100 lb tank to a Type 1 or ACME fitting, which will allow you to connect the 15 foot Valve Extension Hose # 100914-180-MBS. This would then allow you to connect the male end (with the threads on the outside) of the extension to the green female end of your existing 12 inch pigtail, attached to your regulator. Using two pigtails is not ideal, but if you need the 15 foot extension plus the...
    view full answer...
  • Pigtails Needed to Connect Dual Propane Tanks to Regulator on Travel Trailer
    For a typical travel trailer propane setup you will have 1 of 2 pigtails. The first will have the Type 1 connector (with the green cap) and the other has a 1/4" MPT fitting like what we find on the pigtail # 100473-12. I believe this is what you currently have but I think the end you're seeing looks like the MB Sturgis Propane Adapter Fitting # 204120-MBS and I think the white plastic piece is part of the back-check. The other type of pigtail that we see has the same Type 1 connector,...
    view full answer...
  • Swapping One Of Your 30 Pound Propane Tanks For A 100 Pound Tank
    If your trailer is like most then you will not need another regulator. Take a look at the plumbing currently attached to your 30 pound tanks. You should find a short standard propane hose running from one propane tank to the changeover valve, and another hose (from the other 30 pound tank) running to the other connection on the changeover valve. From there the gas will go through an attached regulator and out the bottom to service your trailer. Some trailers have the regulator as a...
    view full answer...
  • Replacement of Propane Hose From Tank to Regulator that Leaks
    So it's the elbow piece that you need? Without knowing the fittings I can't be sure but since that should be the inlet to your regulator it probably has a 1/4 inch male fitting on the end going into the regulator and a 1/4 inch female on the other. We don't carry any 90 degree adapters with those fittings. If those are correct you can probably bypass it if you can get the hose to connect directly to the regulator. Or if I'm wrong about the fittings let me know what they are and I'll...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • How to Connect 20 Pound Propane Tank to Champion 100165 Dual Fuel Generator
    To connect your Champion #100165 Dual Fuel generator to a 100 pound propane tank, the manufacturer states that "The generator can be attached a larger propane tank. The generator requires ½ PSI with a flow rate of 152,000 BTU/hr. when under maximum load. The connection on the front panel is a male 3/8" SAE flare fitting using 5/8” 18 UNF threads." To accomplish this you will need three parts; a cylinder connector (green knob) a propane regulator oriented verticle or horizontal, and...
    view full answer...
  • Adding an External 20 Pound Propane Tank to Supplement Onboard RV Propane Tank
    Yes, you can do this, but to be clear, we will add a Tee fitting that will allow you to use your onboard propane tank and an outdoor 20 pound tank. You cannot use this to refill or add to the primary onboard tank. You can use the JR Products # 37207-30135 Propane T-Fitting to go between the onboard tank and the POL connector currently attached to the tank. Then use a JR Products # 37207-30785 pigtail to connect your 20 pound tank. You didn't ask about this but you can optionally...
    view full answer...
  • Fitting to Allow Your Grill with Type-1 Connector to Connect to Standard 1 Pound Cylinder.
    Thanks for the picture of what you need. I see your grill came with a special regulator that has an inlet for a 1-pound propane bottle and a quick connector on the other side. This unit is not something that we sell. The closest thing we have to that is a MB Sturgis # 108072 Single-Stage Propane regulator with one inlet and one outlet which are both 1/4" Female NPT. On inlet side you could attach the JR Products # 37207-30185 adapter which will attach to your 1 pound propane cylinder. On...
    view full answer...
    Image 1 for
  • Recommended Propane Fittings and Hose for Jetboil
    I have a couple options I recommend for you. If you want a short cable, I recommend the MB Sturgis Quick Disconnect Propane Hose for Small Appliance - Disposable Cylinder Port - 4' # 100476-48-MBS. If you want a little more distance from your camper, then use the MB Sturgis Quick Disconnect Propane Hose for Small Appliance - Disposable Cylinder Port - 10' # 100476-120-MBS. Both options will work well with the low flow quick release adapter on the back of your trailer. If you want...
    view full answer...
  • Connecting Otudoor Grill to Existing Proane Equiped Travel Trailer
    Yes, we can help you add this outdoor cook top to your Toy haulers propane system. Since you want to tap in to the propane down stream of the main regulator I assume that your cook top does NOT have it's own regulator. (If it did we would do this a different way.) Looking at the propane regulator on your trailer you will see coming off both sides at the top the pigtail connections that run to each of your two propane tanks. Coming off the bottom of the regulator is a hose that...
    view full answer...
  • 4 Foot Hose to Connect Propane Tank on Travel Trailer to Regulator
    We have 48 inch hoses to go from a propane tank to a regulator but your fittings don't seem to match standard sizes. A trailer normally has tanks with a Type 1 connection and the standard inlet on regulators is 1/4 inch NPT. Send me some pictures if yours seem different. A 48 inch hose that works for the standard fittings is part # 100575-48-MBS. For this hose you also need an adapter, part # 204120-MBS. Ths converts the inlet on the regulator from 1/4 inch NPT to 1/4 inch FIF. The...
    view full answer...
  • Adding A Quick Disconnect Propane Line To Your Grill
    For your Char Broil 4 Burner Propane Grill I recommend attaching part # 37207-30225 to the line coming off of your grill and then attaching part # 401132-MBS to that. Then you'll need a quick disconnect hose which will be part # 37207-31225 for a 6' hose and part # Item # 37207-31235 for a 12' hose I recommend using some thread sealant tape part # 37207-30025 to ensure your connections stay tight and to prevent any leaks. I've attached some videos to offer additional information...
    view full answer...
  • Propane Regulator Compatible with Tankless Water Heater 157,000 BTU
    You can use a propane tank for the BTUs needed and simply use the appropriate fittings and regulator. For the regulator, I recommend the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr # CAM59333 you referenced which has an 11 inch water column. If you don't have the POL fitting, then I recommend the Camco Vertical 2-Stage Propane Regulator - 160,000 Btu/Hr # CAM59313 or the horizontal 2-Stage # CAM59323 which can use the MB Sturgis Propane Pigtail - Type 1 x 1/4"...
    view full answer...
  • Replacement Propane Hose From POL to Regulator Thats 28 Inches Long
    The overall length of the MB Sturgis hose you asked about is 24-7/8 inches so it's too short for you. Instead I recommend using part # 37207-30645 which is 30 inches. It's a little longer than what you need but it has the same fittings.
    view full answer...
    Image 1 for
  • Need Male Fitting For Propane Quick Connect Part by DEHCO
    After some internet research, it seems that others have tried and failed to find that elusive part also. Save time and trouble = replace both parts with the Camco # CAM59853 Quick Connect Kit. When making threaded propane connections, apply JR Products # 37207-30025 propane-rated thread sealant tape per the instructions.
    view full answer...
  • Do I Need To Put Plumbers Tape On A Propane Pigtail With Inverted Flare?
    You will not have to put any type of sealant on the Sturgis Propane Pigtail # 100575-12-MBS becuase the fitting type is an inverted flare. If you are wanting to take the precaution just to prevent the waist of your gas and/or wanting to prevent the gas from entering into an unwanted space, you need Thread Sealant Tape for Gas Lines Item # 37207-30025. This will seal up any leaks if there is any. I've included videos if you would like to get more info on these products. Whenever you use...
    view full answer...
  • How to Connect 20 lb Propane Tank to Stok Gridiron Grill with Quick Disconnect
    I've always thought that this type of conversion would be useful. Right now there are no commercially available products designed to do what you are looking for, but I have a way we can make this work. To start, the product designed to connect a portable grill to a 20 lb or 30 lb propane tank is a simple adapter hose like part # 100555-72-MBS, but as you mentioned, this would require you to reach under the grill to attach the fitting. If you want to convert the fitting to a quick...
    view full answer...
  • Can I Remove Brass Fittings From Propane Regulator and Plug Hoses Directly Into Regulator?
    Yes. You can remove the Camco # CAM59953 from your Cavagna 924N and use a pigtail with a 1/4" MPT like the # 100473-20-MBS. You'll likely need some gas line tape for the threads; you can use # 37207-30025 to safely thread everything together and make sure that there is no leakage.
    view full answer...
  • Whistling Noise in Propane Bay of 5th Wheel When Heater is Running
    Let's differenciate between whistling, whining, or humming. The regulator has a diaphragm that oscillates and can make what is called a humming noise, and that is normal operation.. If you have whistling, then read on. There are several possibilities related to a whistling noise when using propane. Let's start with safety. If you smell gas or hear a hissing noise around your tanks or lines you may have a leak and need to use some soapy water on all parts and joints to see if it bubbles...
    view full answer...
  • Connecting A Type 1 Low Pressure Propane Cylinder Connector To A Hose
    the general rule of thumb with NPT fittings is that the outer diameter is 1/4" larger than the measurement of the fitting. So a 1/4" MNPT fitting like on the MB Sturgis Black Type 1 Low Pressure Propane Cylinder Connector Item # 204024-MBS would have a 1/4" FNPT fitting connect to it but you would need a 1/2" wrench to tighten it. I recommend also using some Thread Sealant Tape for Gas Lines Item # 37207-30025 to ensure no leakages occur.
    view full answer...
  • Propane Tee Length - Most Compacet Tee.
    There's no doubt about it, those propane Tees take up some space and create awkward connections. The MB Sturgis # 103602-MBS would be as good as any of them if those are the connection types you need. Are you adding a Tee for an outdoor grill? Do you need gas that comes after the pressure regulator? Maybe a better idea is to follow your gas line after the regulator. Most likely there is a hose after the regulator that runs to 1/2" iron NPT pipe that then runs under the coach and goes...
    view full answer...
  • Connecting A Camco Big Red Fire Pit To Your Camper With Quick Disconnect Fittings
    Since you have a 3/8" male fitting coming off of the fire pit you'll attach a Propane Adapter Fitting - 3/8" Female SAE Flare x 1/4" Female NPT Item # 37207-30225 to the fire pit and then to that adapter fitting you'll attach a Quick Disconnect Propane Hose - 1/4" Male NPT - 10' Item # 37207-31135 which will attach to the female quick disconnect you have on your camper. Since the Big Red Fire Pit doesn't have an attached regulator but your quick disconnect is after the regulator on...
    view full answer...
  • Quick Disconnect Gas Fitting To Connect Turkey Fryer to RV
    Thank you for sending these additional pictures. It appears that the hose with fittings, that you have, are designed to connect directly to a 20 pound propane tank. Therefore, on one end you have a large Type-1 connector to attach direcly to the 20 pound tank, then it goes through a propane regulator, then through a length of hose and on the other end is a swivel connector of some size, then into a reducer bushing, then into (what looks like) a tiny carberator jet. So, first, your RV...
    view full answer...
  • Propane Escapes From Vent on Single Stage Regulator When Tank Valve is Opened
    It sounds like your propane regulator has failed. Propane regulators last five to 10 years, then they should be replaced even if they seem to be working OK. They do wear out and go bad, and there are not any user serviceable parts inside. You may find that your regulator has a date of manufacture stamped on them. The Camco # CAM59013 that you referenced is a fine choice for a single-stage, single-tank system. This will be a direct replacement and is easy to change. Inlet has a 1/4"...
    view full answer...
  • Troubleshooting A Roadmaster Even Brake Braking System That Loses Pressure
    The Roadmaster Even Brake Item # RM-9400 should not be releasing pressure after it builds up so you have an issue with your exhaust valve and need to replace it with the Quick Exhaust Valve for Roadmaster BrakeMaster or Even Brake Item # RM-450601-50. I recommend using some Thread Sealant Tape for Gas Lines Item # 37207-30025 as well to ensure a tight connection and prevent leaks.
    view full answer...

Do you have a question about this Propane?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality propane for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate propane information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Leah S
Updated by:
Leah S
Employee Julia Z
Updated by:
Julia Z
Employee David F
Installed by:
David F
Employee Michael B
Installed by:
Michael B
Employee Mike S
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.