MB Sturgis Propane Tank Adapter - POL x 1/4" Male NPT - Excess Flow Bypass

See what our Experts say about this MB Sturgis Propane Fittings

• Recommended LP Gas Regulator for 100 Lb Tank
  The MB Sturgis 2-Stage Propane Regulator part # 108221 for horizontal mount or part # 108220 for vertical mount is what I recommend for a 100 lb tank. It does not matter which you choose so long as you have the vent pointed downward. These regulators will work just fine with both propane and lp gas. In order to connect either regulator you can use the MB Sturgis POL Propane Tank Connector Fitting part # 204051-MBS or the MB Sturgis Hose Assembly part # 100202.
  view full answer...
• Recommended Regulator for 100 lb LP Tank
  The MB Sturgis 2-Stage Propane Regulator part # 108221 for horizontal mount or part # 108220 for vertical mount is what I recommend for a 100 lb lp gas tank. It does not matter which you choose so long as you have the vent pointed downward. I much prefer the dual stage regulators over the single stage as they are more accurate, perform better in the cold, and most can be adjusted if needed. The above two options will will be plenty for a water heater and stove. In order to connect either...
  view full answer...
• Availability of Dual Changeover Propane Regulator Capable of 200k BTU
  We have the JR products regulator part # 37207-31525 which has a BTU rating that is higher than you need. We don't have any 15 foot propane hoses as our longest option is 12 foot with the part # 100040-144-MBS.
  view full answer...
• Available Propane Adapter Hoses
  If your house propane tank is a standard 20-lb tank you will not need two regulators. This is already a low-pressure system so one regulator will suffice. Using two will not be an issue when the tank is full and in warmer weather, but as the tank empties and as temperatures drop so too will the pressure available from the tank. To illustrate, a 20-lb tank with 4.7 gallons of LP gas inside will put out 20-lbs of pressure when the temperature is 10-degrees Fahrenheit but this same tank will...
  view full answer...
• How To Hook Up 100 Propane Tank to Dual Fuel Generator
  A 100 lb propane tank will use a POL fitting so you can attach a regulator like the MB Sturgis Single Stage Propane Regulator part # 108072 using the MB Sturgis POL Propane Tank Connector Fitting part # 204051-MBS. Then, all you need is a hose to go from the other side of the regulator to the accessory. I don't know how long of a hose you need or what size fitting the accessory uses but what I can tell you is that one end will need to have a 1/4" NPT to thread into the regulator. It looks...
  view full answer...
• Parts for Exterior 100 lb Propane Tank Connection to 3/4 Inch Inlet on House
  I don't know the code requirements for your house, but I do know what can physically work for your gas stovetop and fireplace. Since you will be supplying the 3/4 inch pipe, I recommend using the MB Sturgis RV Quick-Connect Propane Grill Hose - 120" Long # 100304-120-MBS which will connect to the MB Sturgis Quick Disconnect Propane Connector - 1/4" FPT # 104052-MBS which in turn connects to the POL # 204051-MBS for your tank. No regulator is needed on the tank side of the system as...
  view full answer...
• Fittings To Connect A 100-lb Propane Tank To A Generator, And A 20-lb Tank To A Cook Top
  To connect your 100-lb propane tank to your generator, you'll need an adapter like # 204051-MBS. Then you'll just need a hose to go from your tank to the generator. A lot of generators utilize the quick disconnect connector, if that's the case, # CAM59883, with # 401132-MBS will work great. If you do not have a quick disconnect connector, disregard the adapter. For your 20-lb tank, you're going to need something like the Propane Quick-Disconnect Hose w/ Regulator # 37207-31275. This...
  view full answer...

Do you have a question about this Propane Fitting?