Propane hose assembly connects your dual LP gas cylinder setup to the regulator on your camper. Internal back-check prevents gas leaks.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there. I'm Michael with eTrailer.com. Today we're taking a look at the JR Products propane hose. Like most of your propane hoses, this is going to connect between your gas tank and your RVs regulator to provide that flow of propane to your RV to power those propane-powered appliances. Now, there are a few things you'd want to look for when deciding on which propane hose is going to be right for you. The first thing, is going to be the length.
Obviously you want it to be able to reach between your tank and your regulator on your RV. This hose is four feet long. I just measured it a moment ago and it was right about 49 inches, so it's going to give you a little bit of wiggle room to work with there. The hose itself is made of a rubber construction that's going to help reduce any sort of kinks or cracking, anything like that.It's got an inner diameter of a quarter of an inch, which is pretty standard for these hoses. It's going to provide plenty of room for your propane to flow through, to power up those appliances.
The next thing that you want to look for is your propane or your hose fittings. So we've got two different fittings here. This one here, the big green one, it's an RV type-1 ACMe or sometimes known as a QCC-1 connection. These are going to screw onto the outer threads of your tank valve. It's going to be pretty universal.
It's going to work with almost all your gas cylinders. I like this because it threads on clockwise, so for those of us who know the method of righty tighty, lefty loosey, it's going to be very easy to use. We're not going to have to think about it. There are some other connectors out there that thread on the inside of the valve and you have to tighten them the other direction.It can be a little bit confusing. You have to pay attention to what you're doing.
This is going to be very easy to use. You can just tighten it by hand. You're not going to have to have any special tools or anything like that. Another nice thing about this QCC-1 connection, it's got an internal back-check that's going to prevent gas from leaking out of the regulator inlet. If too much gas flows through, it's going to go into your bypass mode, which is going to shut down your pressure to the minimum pressure to help reduce any gas loss or combustion. It senses that gas leak by how much gas is flowing through. So if you're using a lot of propane, you're running all your appliances at once or something, you're probably not going to have to worry about that. The bypass mode is set pretty high, so you're going to have a high flow rate.You're going to be able to use all those appliances without having to worry about it, but if you do get a gas leak, it will enter that bypass mode as a safety measure. The other end here is our quarter-inch male inverted flare. So while this is pretty standard, our QCC is going to work with almost all of our gas tanks. Our inverted flare end is kind of hit or miss. Some of your regulators have them, some of them have a different fitting on them. A quick rule of thumb to check, if you are a regulator has a gold adapter fitting, it's most likely going to use the male inverted flare, so go out and check your regulator. If you see that gold adapter fitting, this could be the hose that you're needing. Keep in mind, this hose is designed for LP gas only, so don't use any other kind of gas with it.Of course, LP stands for liquid propane. You don't want to use water or anything else in this hose. It's just for your LP gas. This hose is UL and CSA approved, so it's going to hold up to those standards. Going to do a good job for you, and if this isn't the hose that you need, maybe you've got a different adapter on your regulator or you need a longer hose hose or a shorter hose, maybe. I encourage you to come and look at our other options here at eTrailer.com. Our goal is always to help you find the product that you need to solve your problem so you can get back to enjoying your time outdoors. That's going to complete our look at the JR Products propane hose.
Average Customer Rating: 4.8 out of 5 stars (162 Customer Reviews)
Propane hose assembly connects your dual LP gas cylinder setup to the regulator on your camper. Internal back-check prevents gas leaks.
Do you have a question about this Propane Fitting?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.