Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Propane hose assembly connects your dual LP gas cylinder setup to the regulator on your camper. Internal back-check prevents gas leaks.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there. I'm Michael with etrailer.com. Today we're taking a look at the JR Products, propane hose. Like most propane hoses, this is going to connect between your LP gas cylinder and your travel trailers regulator.The main thing that you're looking for when you're trying to find a hose like this is probably going to be the length, to make sure that you're going to have enough to connect between your tank and your regulator.This is a 15-inch long hose. The actual measurement, it's a little bit longer than that, and, say, it's about 15 and five- eighths of an inch long. It's got a quarter inch diameter inside this rubber hose here.
So it's going to provide plenty of flow rate for you so that you can use all your appliances.The other thing that you're going to be interested in is the connection points. So here we have a Type-1 ACME or it's sometimes called a QCC1, this mounts onto the outside of your LP gas cylinders valve.And it's going to tighten on clockwise, which is going to be a lot easier for those of us who remember how to tighten things using the righty-tighty lefty-loosey method. On the other end, we're going to get the quarter inch male inverted flare. That's going to connect to your regulator.So this is the one that you really need to pay attention to. This QCC1 fitting is going to work with almost all your gas cylinders out there.
So you don't really have to worry about it. We'll just tighten by hand. This one is the one that you want to make sure that is going to be compatible with your regulator. You want to ensure that it's got a female flare end so that this male inverted flare end will fit in there.This is going to have a internal back-check, that's going to prevent any leaks. So that's something else that you might be concerned about.
This will help you with that.There is a bypass mode. If it senses that it's got a leak, it will push the pressure down to the minimum pressure. But you're going to have plenty of flow before you get to that point. So you probably won't have to worry about that. This is UL and CSA approved, so it should be a good fit for you.
If you need that length and those two connection points.That's going to complete our look at the JR Products, propane hose..
Average Customer Rating: 5.0 out of 5 stars (23 Customer Reviews)
Propane hose assembly connects your dual LP gas cylinder setup to the regulator on your camper. Internal back-check prevents gas leaks.Works great,
It work's Just what was needed to replace 3 year old ones.
We were recommended to check out Etrailer. High quality propane hose- something you don't want to skimp on. I do recommend..
I was having trouble with my 12 year old RV, propane system. After my propane kept shutting off while camping, I started with the easiest solution first. I ordered these hoses from Etrailer, they were the best quality I could find. My propane works great now!
As always quick service from a large selection of products. Appreciate the on line experience and etrailer seems to always have the part we’re looking for. Thanks!
EXCELLENT CUSTOMER SERVICE AND SPEEDY DELIVERY . I’d buy from the again regardless of price just because of their service !
Do you have a question about this Propane Fitting?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Paul
8/18/2022
Part continues to work! No leaks, perfect!