bing tracking image
  1. Propane Fittings
  2. GasStop
  3. Hoses
  4. Pigtail Hoses
  5. 1 Foot
  6. 1/4 Inch - MIF
GasGear 90-Degree Propane Hose - Type 1 x 1/4" Male Inverted Flare - 12" Long - Rubber

GasGear 90-Degree Propane Hose - Type 1 x 1/4" Male Inverted Flare - 12" Long - Rubber

Item # GS57FR
lowest price pledge
Retail:$35.99
Our Price: $25.34
You Save: 30%
Propane Fittings
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.48 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Hose has a 90-degree fitting for an easy connection to a propane tank in a small compartment on your travel trailer or fifth wheel. This design works great in cramped spaces and won't snag your propane tank cover. Lowest Prices for the best propane fittings from GasStop. GasGear 90-Degree Propane Hose - Type 1 x 1/4" Male Inverted Flare - 12" Long - Rubber part number GS57FR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (7)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

GasStop Propane Fittings - GS57FR

  • Hoses
  • Pigtail Hoses
  • 1 Foot
  • 1/4 Inch - MIF
  • Type 1 - Female
  • GasStop

Hose has a 90-degree fitting for an easy connection to a propane tank in a small compartment on your travel trailer or fifth wheel. This design works great in cramped spaces and won't snag your propane tank cover.


Features:

  • Pigtail hose connects the propane tank to the regulator on your travel trailer or 5th wheel
    • Add a GasStop ACME-style safety valve (GS24FR - sold separately) to protect against major leaks
  • 90-Degree ACME fitting lets you easily connect to a propane tank in a small or cramped compartment
    • Can place a cover over your propane tank without the hose snagging it
  • Durable rubber hose and corrosion-resistant brass fittings
  • UL and CSA approved


Specs:

  • Hose length: 12"
  • Hose fittings:
    • Inlet: male Type 1 ACME cylinder connection
    • Outlet: 1/4" male inverted flare
  • Maximum flow capacity: 200,000 Btu
  • Maximum pressure rating: 250 psi
  • Quantity: 1 propane pigtail hose
  • 2-Year limited warranty


Note: Adapter fitting (sold separately) may be required to connect your hose to your propane system's regulator.


GasStop Hose Installed

Tired of the propane pigtail hose on your travel trailer or fifth wheel tangling up and getting in the way? This hose has a 90-degree ACME connection that makes it easier to connect to a tank in a small compartment or a tight space. This helps prevent it from bunching and puts less stress on the hose, which means it'll last longer. And you can put a cover over your propane tank without the hose snagging the fabric or stop it from fitting over the tank altogether.



GG90IF-12 Gas Gear by Gas Stop Pigtail RV Propane Hose - ACME Type 1 x 1/4" Inverted Flare - 12" - Rubber





Video of GasGear 90-Degree Propane Hose - Type 1 x 1/4" Male Inverted Flare - 12" Long - Rubber

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for GasStop GasGear 90-Degree Propane Hose Review

What's up, everybody Adam here with etrailer. Let's take a look at some propane hoses. Well these are from GasStop. We're gonna have two different kinds. We're gonna have these stainless steel braided line. This one's just gonna perform the same as the rubber one, but the rubber is gonna be a more cost effective option, probably not last as long.

And the more premium option it's gonna be the stainless steel and this one's gonna last a lot longer than just your basic rubber hose. We're gonna have two different kinds when it comes to length. We're gonna have the 12 inch hose and then we're also gonna have the 18 inch hose. So as you can see, it just depends on what kind of space you're really working with. And all of these are gonna have a max PSI rating of 250.

And then we're gonna have a max BTU per hour of 200,000 for all of our hoses. Now this is where length comes into play. The ones that are on our camper right now are a little bit shorter than 12 inches long. So I'm gonna pick the 12 inches. But what I'm gonna go with is not the rubber since it's gonna be a decent amount of stress, because we're gonna have to kind of bend these around.

So I'm gonna go with the stainless right here. So basically what you want to do whenever you are swapping out your hoses, is we wanna make sure everything's shut off. So we shut off the propane tanks and they are gonna have the ACME fitting. So we don't really need a tool for this. So we can go ahead and take the ACME fitting off this side.

Then we can grab a hose or a wrench to grab and loosen this up. And you kind of tell these are just super, super stiff. So that's kinda why we're upgrading to the braided stainless steel. It's not gonna get this stiff after it's been on here a while. Sometimes shorter isn't better. So I went ahead and did both different sizes. So on this side I used the 18 inch long lines. I was able to go all the way around on the inside of this and connect it since it has this 90 degree, which is super, super convenient. But now when I put this cover on, these lines aren't gonna be in the way. So I'm gonna do the same exact thing with this one, which is the 12 inch long one. So let's just see exactly if shorter is better. So I'm gonna use a 7/16th inch wrench to kind of get this started. First thing I did on the other one. So I just put this on just to kind of break it loose because this will pivot on its own. Just like that. Once that's loose, get it kind of lined up and straight. I like to do this one first 'cause it has the most amount of threads and we really don't want to cross set these. The other one's a lot easier to get 'cause we can just do it with our hands. And one thing, before I put this on, actually. So some people think that we need to put thread tape on. Well we have a tapered MPT fitting. So if you have a straight MPT fitting, you're gonna have to put it on there, but if you see this little taper on the inside here, this is not going to need any type of tape. So just keep that in mind. If it's on there, when you pull your old one off, just take a look at the fitting. If it's tapered, you don't really have to do that step. So kind of do it with the cable, just turning it and tightening it up like this, so it's nice and tight. So let's see what the best route is for this. I think to keep it kind of out of the way, I think that's probably our best bet. Twisty, twisty, twisty. And we are good to go. There we go. And we're pretty much done. One thing I would add to the setup is a emergency shutoff valve. GasStop makes them. Basically what's gonna happen whenever you have a tiny little leak, rather it's up here by your connections, or even just inside with one of our appliances, it's gonna shut it off to prevent that gas from continuing to leak. It's gonna keep everybody safe on the inside and just preserve your propane. Now once we get it on, it's just gonna go in between our propane tank and our line. So once that's done, we can open up our valve and then we can push it to reset it. So there we go. And if there is some sort of a leak, it's gonna cut it off just like that. So it'll keep that gas up to the gauge, but it won't allow it to go back through. It's just a safety mechanism. That's going to just keep everybody safe and preserve your propane. Ultimately, the problem we we're trying to solve is this. These lines are super stiff and they're on their way out. So that's why we upgraded to the stainless steel lines. We shouldn't have that issue whenever we go down the road. These are probably only about a year, maybe two or three years old, and they're already kind of seized up. So these are gonna crack really easily. That's why we went to stainless steel lines. That's why we also didn't just go with the same kind of material here. But also a nice thing about these is we have a 90 degree, so that just makes for a lot cleaner setup. So it looks better and it's gonna fit in the casing a lot easier, too. So whether you go with the rubber pieces or just the stainless steel braided lines, it's gonna be a great upgrade for ya. I personally will go with the stainless steel just because it's gonna last longer. It might be a little bit more in the beginning, but it's gonna last. So you're really gonna get the value out of it. That's basically it for a look at the GasStop propane hoses..


Customer Reviews

GasGear 90-Degree Propane Hose - Type 1 x 1/4" Male Inverted Flare - 12" Long - Rubber - GS57FR

Average Customer Rating:  5.0 out of 5 stars   (7 Customer Reviews)

Hose has a 90-degree fitting for an easy connection to a propane tank in a small compartment on your travel trailer or fifth wheel. This design works great in cramped spaces and won't snag your propane tank cover.

by:



by:

Review from a similar GasGear Propane Hose in Propane Fittings


These are a great upgrade for the trailer ! Well made and worked excellent with the gas stop I installed for additional safety .The propane cover fits with the gas stop now ! This was exactly what is needed for this added safety device. Highly recommended



by:

Review from a similar GasGear Propane Hose in Propane Fittings


Fast shipping and fits perfectly with an easy install. Good thing too. The propane hoses that were attached to my tanks were two different hoses. Now, they're both the same and the braided hoses will last much longer.



by:

Review from a similar GasGear Propane Hose in Propane Fittings


A must have if you have installed gas stop. Easy to install, sturdy and well made. etrailer shipped quick as always, the low price guarantee means I feel confident I got the best price.



by:

Review from a similar GasGear Propane Hose in Propane Fittings


Just installed them on my camping trailer today. Installed with Gas one propane guages and they still fit under the tank cover. Main reason I bought them was for the 90% offset. So far no leaks.



by:

Review from a similar GasGear Propane Hose in Propane Fittings


I just installed them and they work great and the quality looks excellent.

thank you



by:

Review from a similar GasGear Propane Hose in Propane Fittings


Product was delivered on time, fit properly, and is of good quality.


7
7

Ask the Experts about this GasStop Propane Fittings




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality propane fittings for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate propane fitting information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Chris R
Video Edited:
Chris R
Employee Mary E
Written by:
Mary E
Employee Amanda M
Edited by:
Amanda M
Employee Adam E
Installed by:
Adam E
Employee Robert O
Installed by:
Robert O

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.