Derale Series 7000 Tube-Fin Power Steering Cooler Kit w/ Hose Barb Inlets

Video Transcript for Review of Derale Power Steering Coolers - Cooler and Install Kit - D13211

Today we're going to take a look at the Derale Series 7000 Tube-Fin Power Steering Cooler Kit with the Hose Barb Inlets. Now this will improve functioning and overall performance of your power steering system. It is designed with copper tubing expanded into aluminum fins for maximum heat transfer. Copper's your best material for conducting the heat out of the fluid, while aluminum's ideal for transferring and dissipating that heat. It is protected from possible damage during installation by the plastic fin guards and a nice powder coat finish.This part will include everything laid out here on the table: the cooler with the mounting brackets, a 4' long high temperature OEM spec hose with the stainless steel k-clamps to install it, the nylon mounting rods with pads, and a nice set of installation instructions that will describe how to install everything.This part is made in the U.S.A. A few specs again, the inlets are 11/32" hose barbs.

The cord length is going to be right at 10". The width of it is going to be right at 2 1/2". Now the distance between the inlets, center to center, is right at 1 1/4" and the overall dimensions including the mounting brackets, from one end to the other you're going to be right at 12 1/2" long by 2 1/2" wide, and your total depth on it is going to be right at 1 3/4" deep.That should do it for the review on the Derale Series 7000 Tube-Fin Power Steering Cooler Kit with the Hose Barb Inlets.