Pintle Hook Mount, 12-1/2" Tall, 8K

Pintle Hook Mount, 12-1/2" Tall, 8K

Item # 63058

lowest price pledge

Retail:$126.64

Our Price: $90.61

You Save: 28%
Pintle Hitch

Orders above $99 qualify for Free Shipping

Shipping Weight: 31 lbs

Quantity: 
In Stock, Ships Today
Tow Ready Pintle Hitch - 63058
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Pintle Mounting Plate
  • 2 Inch Hitch Mount
  • 8000 lbs GTW
  • Tow Ready
  • 14 Holes
  • Standard Shank
Lowest Prices for the best pintle hitch from Tow Ready. Pintle Hook Mount, 12-1/2" Tall, 8K part number 63058 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (19)
  • Q & A (10)
  • Videos (1)
  • Photos
  • Why etrailer?

Tow Ready Pintle Hitch - 63058


Tow Ready Pintle Hook Mount by Draw-Tite, Hidden Hitch and Reese

Features:
  • Pintle hook mount slides into 2" trailer hitch to provide a mounting location for a pintle hook
  • Solid shank for added strength
Specs:
  • Capacity: 8,000 lbs towing | 800 lbs tongue
  • Fits 2" x 2" trailer hitches
  • Shank length: 11-3/8" from the center of the hitch pin hole to the front of the mounting plate
    • Measures 3-1/4" from the center of the hitch pin hole to the end of the shank that slides into the hitch
  • Plate measurements: 12-1/2" tall x 5" wide
  • Hole spacing: 3-3/8" (horizontal) x 1-3/4" (vertical) - center to center
    • 7 Sets of holes on the plate
    • Hole diameter: 17/32"


Product detail

Product detail



63058 Pintle Hook Mount, 12-1/2" Tall, 8K






California residents: click here


Video of Pintle Hook Mount, 12-1/2" Tall, 8K


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Tow Ready Pintle Hitch - Pintle Mounting Plate - 63058 Review

Today were going to take a look at this Tow Ready Pintle Hook Mount part number 63058. This is a pretty hefty piece of work weighing in at 24 lbs and it features a solid shank. This pintle hook mount slides into a 2-inch trailer hitch to provide a mounting location for pintle hook. It has a gross towing weight capacity of 8000 lbs and a tongue weight capacity of 800 lbs. the shank length from the center of the hitch pin hole here to the front of the mounting plate is 11-3/4 of an inch and from the center of the hitch pin hole here to the end of the shank, the end that goes into the trailer hitch receiver, is 3-1/4 inches. Looking at the plate measurements we have a plate that is 12-1/2 inches tall by 5 inches wide.

The whole spacing from center to center horizontal is 3-3/8 of an inch and center to center vertical is 1-3/4 of an inch. There are seven sets of holes on this plate with a hole diameter of 17/32 of an inch. This would fit into your 2-inch trailer hitch receiver and you would clip this off using a pinning clip. This is not included with the item, however, you can purchase these right here at etrailer.com part number PC3. You just put the pin in there clip that off and then youre all set.

If you wanted some further security, we also carry a number of hitch lock here at etrailer.com as well. That should do it for the Tow Ready Pintle Hook Mount part number 63058.


Customer Reviews

Pintle Hook Mount, 12-1/2" Tall, 8K - 63058

Average Customer Rating:  4.8 out of 5 stars   (19 Customer Reviews)


- 63058
by:

Received timely and in good packaging. Will continue to order from etrailer. 505821



- 63058
by:

It fit perfectly 389510



- 63058
by:

Good tight fit in receiver. Plenty of a djustment. 284801



- 63058
by:

Product received was of high quality and as advertised. Still extremely satisfied after one year of ownership. 282990



- 63058
by:

The drop hitch mount is a well built strong unit with the dimensions that we needed. The dimensions between the pin hole and the back brace allowed us to use it in the up position if need. The adjustable mount holes allows for leveling on different trailers with pintle ring, no problem. The video was extremely helpful in deciding if this unit was what we were after. Will share pictures after Santa comes! Thanks. 233163


Comments

Work as expected. Good.

Harry T - 12/04/2016

21984

- 63058
by:

I haven't used it yet, it does fit the hitch on a 2014 LTZ Chevy truck. Very heavy duty piece. Customer service has great and shipping was timely and free. More to follow, GS 189948



- 63058
by:

Quick free shipping, got it in 2 days! Very sturdy and heavy duty. Fair price Exactly what I needed. 161818



- 63058
by:

The ball mount as arrived, did not fit my receiver in the truck. Yes, it is 2x2 inch but the corners are not rounded like they should be. I had to use the file and to file 4 corners of the shank section which slides into my truck hitch receiver. It did not take much time to do it but it would be nice if the Etrailer contacts the manufacturer so that they can make required minor change. I am very happy with a quick shipment of these items and great packaging of these heavy items. I would highly recommend the Etrailer to anybody who needs good parts for the trailer at a good price and for a very quick deliver. 128860


Comments

What I bought from e-Trailer has been great. Feel free to add this as a follow up review. Thanks , have a good day

rod r - 05/05/2015

11423

- 63058
by:

This thing is HEAVY duty! 110348



- 63058
by:

works great thanks 69344



- 63058
by:

Great selection at the best prices. Well packed and shipped quickly also. 62018



- 63058
by:

This is a high quality product that I purchased for my former military trailer. The trailer has a pintle/lunette arrangement and sits higher than my trailer hitch. My present pintle hitch could not be adjusted to compensate for that change so I purchased this mount. I just unbolted by pintle and bolted it on this mount. It works great and I'm very happy with it. Very rugged. 35480



- 63058
by:

This was delivered very quickly and packed excellently. This is my second order from e trailer and I will only do my hauling and towing equipment business with them. 26229



- 63058
by:

Thanks for the great service and speed. 25519



- 63058
by:

This is a VERY heavy duty, well-built item. Everything is solid steel including the square receiver tube. I bought it to use in the upright position to raise my pintle hitch a bit higher so my M105A2 military trailer rides more level. Works great! 25468



- 63058
by:

I was informed of my order as it left the shop and along the way. It got to me when they said it would. And the price was right. 11280



- 63058
by:

This hitch is solid, big and heavy. I used it to tow my new M-105 1.5 ton military trailer with my chevy blazer. It worked awesome! Very solid high quality product. 7319



- 63058
by:

It's a good, heavy solidly built product that has enough adjustment for a variety of vehicle and trailer styles. It looks like it will do everything I need it to do. etrailer service is top notch. 6889



- 63058
by:

Pintle Hitch Parts eTrailer had the best selection, and pricing that I could find for this extra long pintle hitch mount & hook. Works great on my Explorer. With free shipping, it cost less to order it from them than buying it at a local retailer. And delivery was blazing fast. I ordered on Tuesday, and had my hitch on Thursday. 5456


19
19

Ask the Experts about this Tow Ready Pintle Hitch

Do you have a question about this Pintle Hitch?


  • Short Shank Pintle Mount that has the Most Rise and Drop Adjustments
  • The pintle mounting plates with 14 adjustment holes are going to be your best bet. These include the Curt one you referenced # C48341, another Curt option # C48342 which has a slightly longer shank, and Tow Ready mount # 63058 which is rated for 8K (the other two are rated for 10K) and a longer shank than the other 2 options. Based on what you are looking for # C48341 is the one that I would go with. The amount of rise or drop will also depend on the pintle that is attached to this...
    view full answer...

  • Can the Pintle Hook Mount, 12-1/2 Inches Tall, 8K, # 63058, Be Used in the Rise Position
  • The Pintle Hook Mount, 12-1/2 Inches Tall, 8K, # 63058, can be used in either the drop or rise position, which ever would work best to keep your M105 trailer the most level. You would need to use the maximum number of mounting holes on the Mount that your Pintle Hook will allow.
    view full answer...

  • Pintle Hook Mount and Pintle Hook Recommendation for Pulling a Military Trailer With a Chevy Tahoe
  • The pintle hook mount that I would recommend for you is the Pintle Hook Mount, 12-1/2 inch Tall, 8K, part # 63058. This hook mount has an adjustable rise that will go up to a 12 inches. That would put the height of your pintle hook mount right at 31 inches if it was in the highest possible position. This hook mount has a tongue weight capacity of 800 lbs and a total weight capacity of 8000 lbs, you will want to check that against the weight of your trailer to make sure its not too much...
    view full answer...

  • Tailgate Clearance with Tow Ready # 63058 Pintle Mount
  • If used in the rise position, the # 63058 pintle hook mount would measure 11-1/2 inches from the bottom of the shank to the top of the plate. The tailgate clearance will depend on how far above the top of the plate the pintle would extend. With the B and W model, part # BWPMHD14004, the distance from the bottom of the shank to the top of the plate would be right at 11-1/4 inches. You can see these dimensions in the photos I have edited for you.
    view full answer...

  • Could the B and W Pintle Hook Mount # BWPMHD14005 Fit in Rise Position on a Jeep
  • From the center of the hitch pin hole of the B and W Pintle Hook Mounts # BWPMHD14005 to the beginning of the support bracket the product measures 6-1/2 inches. You will need to measure from the center of your hitch pin hole out 6-1/2 inches to see where the bracket would be if this product was installed in the hitch of your 2013 Jeep Wrangler to determine if this would clear in the rise position or not. For more measurements check out the review video I attached.
    view full answer...

  • Availability of a Pintle Hook Mounting Plate Rated for 10,000 Pounds
  • The capacity of the Pintle Hook Mount, # 63058, is 8,000 pounds maximum no matter how it is mounted. Any more weight on it than that could cause the unit to fail and would void the warranty. We have a cushioned mount with 10 holes rated for 10,000 pounds, # AMPC3. I have included a link to a video review for you. There is also a 7-1/2 inch tall Tow Ready model, # 63059, rated for 12,000 pounds. These 2 options are going to get you the closest to the height of the 8K model with the capacity...
    view full answer...

  • Pintle Hitch with 6 Inch Rise to Clear Spare Tire on a Jeep Liberty
  • Given the low weight of the trailer you might be able to use an extension such as # HE06 since none of the pintle mounts will come out far enough to clear the spare tire on your Jeep Liberty. However, the use of an extender will reduce the tongue weight capacity of the hitch by 50 percent. As long as the tongue weight does not exceed the reduced tongue weight it will work. You could use a pintle hook mount, # 63058, with pintle hitch # 63013. If that will not work then the easiest...
    view full answer...

  • Can Pintle Hook Mount # 63058 be Used in Rise Position
  • The Pintle Hook Mount, 12-1/2 Inches Tall, 8K, # 63058, can be used in either the drop or rise position, which ever would work best for you application!
    view full answer...

  • Will the Plate on the Tow Ready Pintle Hook Mount # 63058 Flex Wha Braking or Accelerating
  • The plate on the Tow Ready Pintle Hook Mount # 63058 has a gusset behind it that keeps it in place and will not allow it to flex (see attached picture). Unless you are exceeding the 8,000 lbs towing or 800 lb tongue weight capacities then you have no worries about the trailer flexing that plate and making contact with your bumper! If you don't already have a pintle hook then I recommend going with the Pintle Hook Combo # TR63011 which also provides you with a 2" hitch ball. Both the...
    view full answer...

  • Torquing Resistance of Tow Ready 63058 Pintle Hook Mount
  • The Tow Ready Pintle Hook Mount, part # 63058 carries an 8000 lb towng/800 lb tongue weight capacity. Tow Ready tells me that the plate should not warp as long as the capacities aren't exceeded.
    view full answer...


Do you have a question about this Pintle Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality pintle hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate pintle hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Brandon M
Installed by:
Cole B
Updated by:
Laura H
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.