View Cart
FITS 2016 Ford F-150
Putco Luminix Off-Road LED Light Bar - 3,600 Lumens - Narrow Spot Beam - 10" Long

Putco Luminix Off-Road LED Light Bar - 3,600 Lumens - Narrow Spot Beam - 10" Long

Item # P10010

lowest price pledge

Our Price: $271.99

Off Road Lights
Confirmed to Fit
2016 Ford F-150

All models using P2240

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 4 lbs

Quantity: 
Off Road Lights P10010 - 12 Inch or Shorter - Putco
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed


  • Straight Light Bar
  • Light Bar
  • LED Light
  • 12 Inch or Shorter
  • Spot Beam
  • Putco
  • Black
  • Aluminum
Putco off road lights for your 2016 Ford F-150 are available from etrailer.com. Installation instructions and reviews for your Ford off road lights. Expert service, and cheapest off road lights price guarantee. etrailer.com carries a complete line of Putco products. Order your Putco Luminix Off-Road LED Light Bar - 3,600 Lumens - Narrow Spot Beam - 10" Long part number P10010 online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (1)
  • Q & A (3)
  • Videos (2)
  • Photos
  • Why etrailer?

2016 Ford F-150 - Putco Luminix Off-Road LED Light Bar - 3,600 Lumens - Narrow Spot Beam - 10" Long

Slim, low-profile aluminum LED light bar has multiple lenses to illuminate an area. Durable and lightweight bar has a 15-degree spot beam for focused light. Mounting hardware, universal brackets, and wiring harness included. 9 Diodes.


Features:

  • Low-profile LED light bar delivers bright, focused light
    • 15-Degree spot beam is created by chrome-backed focus lenses
    • Slim design lets you install light bar in tight spaces
  • Unique design has 9 individual lenses
  • High-quality light output from a single row of (9) 3-watt Nichia LEDs
    • Light bar can be turned on and off with wireless remote (P8770F - sold separately)
    • Quality LEDs with 50,000-hour life spans
  • Built-in safeguards
    • Thermal control chips help prevent LEDs from overheating
    • Over/under voltage protection keeps the light bar operating at the correct voltage
  • Durable, waterproof, corrosion-resistant construction
    • Black anodized 6061 billet aluminum housing is lightweight and rustproof
    • Black powder coated stainless steel mounting brackets resist corrosion
    • LEDs are fully potted to protect fragile components
    • Industry-standard protection against dust and moisture
  • Easy installation with included parts
    • Light mounts on your roof, roll bar, bumper, grille guard, hood, or bull bar for a rugged look
    • 2 Sets of adjustable mounting brackets (tall and short) included
      • Custom mounting brackets sold separately
    • Wiring harness has illuminated switch and industry-standard Deutsch connector
  • Made in the USA


Specs:

  • Dimensions: 11-5/8" long x 1-1/2" tall x 3/4" deep
    • Overall bar length (bolt to bolt): 12-3/4" long
  • Light output: 3,600 effective lumens
  • Beam: narrow 15-degree spot
  • Color temperature: 6,000 K
  • Diodes: 9
  • Wattage: 27 watts
    • 3 Watts per LED
  • Power draw: 2.25 amps
  • Input voltage: 12V - 36V DC
  • Operating temperature range: -100 F to 180 F
  • 3-Year warranty


Light up the night with a Luminix LED light bar. This lightweight, extremely low-profile bar features 9 fully potted Nichia LEDs for bright, high-quality light. The bar's slim design lets you mount it in tight spaces on your roof, roll bar, bumper, grille guard, hood, or bull bar.


Narrow 15-Degree Spot Beam

Each LED has a chrome-backed, 15-degree focus lens to concentrate the beam for more focused light. This narrow beam pattern is great for seeing at a distance.


High-Quality Light Output

Lumens are used to measure the amount of usable light that is put out by a light source. This LED light bar has the capability to produce 3,600 lumens of high-quality, bright light.


Cool-colored light, especially that with a high color temperature, promotes driver alertness, as opposed to warm-colored light, which promotes relaxation. Color temperature is based on chromaticity, which refers to the quality of a color rather than its luminance. This cool-colored light bar has a 6,000 K color temperature, which allows for bright light with high-quality color so that you not only see the world around you, but you're truly aware of it.


Built-In Safeguards

This light bar has high-quality LEDs with 50,000-hour life spans. These LEDs are more efficient than other lower-grade LEDs on the market, which means that they last longer and burn brighter.


The solid aluminum construction of the light bar offers greater cooling and a higher heat tolerance when compared with extruded aluminum lights. The light bar also has thermal control chips built in to help prevent overheating. In addition, integrated over/under voltage protection keeps the light operating at the correct voltage.


Durable, Waterproof Construction

This lightweight LED light bar is constructed of rustproof, black anodized 6061 billet aluminum for durability and style. The LEDs are fully potted for protection, especially during off-road use. And the bar meets industry standards for dust and moisture protection.


Installation

Wiring harness and universal brackets

Two sets of universal, adjustable, black powder coated stainless steel mounting brackets (1 tall set and 1 short set) are included with the light bar for mounting the bar to flat surfaces. The universal brackets let you install the bar upright on the roof, on the front of your vehicle, or on the underside of the hood. The included stainless steel mounting hardware keeps the light firmly in place.


Deutsche connector

The included wiring harness connects to your vehicle's battery for power and plugs into the light with an industry-standard Deutsche connector. An on/off toggle switch is included as well, and it is illuminated so you can easily see it. Unlike other lights, there is no electrical hum or noise created when this light bar is turned on.


Putco offers a variety of accessories for a more customized light bar setup. Application-specific mounting brackets are available for a better fit and a more streamlined look. The remote control kit (P8770F - sold separately) lets you activate the light bar from outside your vehicle. And the wind diffuser can be cut down to the size of the bar and installed on the bottom of the light to help eliminate wind noise and vibration.



10010 Putco High Power Luminix Off Road LED Light Bar for Trucks, SUVs, and ATVs - 27W - 3,600 Effective Lumens - Spot Beam - 10" Long





Video of Putco Luminix Off-Road LED Light Bar - 3,600 Lumens - Narrow Spot Beam - 10" Long


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Putco Off Road Lights - Light Bar - P10010 Review

Today, we're going to review part number P10010. This is the Putco high power 9 LED Luminix off-road light bar. It has 27 watts and a 15-degree spot beam pattern. This part number includes everything shown here on the table. It includes the light bar, the wiring harness, the illuminated switch, the mounting brackets (both long and short), and the installation hardware, which is already installed on the end of the light bar, and a nice set of detailed instructions. This is a very low-profile LED light bar. It delivers bright focus light.

The pattern it gives off is a 15-degree spot beam pattern, which is created by these chromed back focus lenses. It is a very slim design. It will let you install this light bar in very tight spaces. It has a very high quality light output from this single row of nine 3-watt Nokia LEDs. This light bar also can be turned on or off with a wireless remote if you prefer. They've got it sold separately on our website.

It's usually listed as a related product on this product page. That's part number P8770F. This light bar uses quality LEDs with a 50,000 hour lifespan. A few built in safeguards in to this light bar is the thermal control chips, which will help prevent LEDs from overheating and also the over and under voltage protection, which keeps the light bar operating at the correct voltage. It has a durable waterproof corrosion-resistant construction with some black anodized billet aluminum housing, which is very light-weight and rust-proof. The installation mounting brackets are a black powder coat stainless steel finish, which will help resist corrosion. The LEDs on the light bar are fully podded to protect any fragile components.

They also have the industry standard protection against dust and moisture. It's a very installation with these included parts. This light can mount on your roof or rollbar, bumper, hood, even a bull bar to give you a nice rugged look. The 2 sets of the adjustable mounting brackets right here (both tall and short) are included. You just unscrew this, put your mounting bracket on, screw it back on to tighten it down, and then mount it to where you need to. We do sell some custom mounting brackets, which we do sell separately. They are also listed on this product page as a related product.

This wiring harness comes with the illuminated switch. The other nice feature is it uses the industry standard Deutsch connector. What's nice about that is it has the triple seal on it, so when you go to plug this in to your light bar, it pushes in very tight, and once it gets in, it locks into place and the triple seal in there will give it a nice weatherproof connection. On the other side of the wiring harness, you have the 3 wires coming out of this section. That's where your illuminated switch will plug into the back here. I'm going to show you this in a minutes. The other wire that comes out of the wiring harness is inline fuse holder with a black and a red wire. The red is for the power connection. Black is for the ground. That's what you hook up to your 12-volt power. Then, you just want to make sure that there is a 15-amp fuse in it that comes with it. This part is made in the USA. A few specs on it again. It has 9 LEDs at 3 watts each, so 27 watts. The power draw is 2.25 amps. Input voltage is 12 volts to 36 volts DC. The operating temperature of this light bar is from -100 degree Fahrenheit up to 180 degrees Fahrenheit. It has a limited 2-year warranty. The light output itself, the brightness is 3600 lumens. The beam it gives off again is a narrowed 15 degree spot beam, and the color temperature that the light gives off is 6000 degrees Kelvin. The bar dimension, the length of it is 11-1/2". The height is 1-1/2" tall, and the depth is 3/4". Basically what I'm going to do now is we're going to hook this up to a 12-volt power supply, and then, I'm going to show you how bright the light is and try to show you the pattern. We'll turn off the overhead lights. First what we want to do is let's connect the Deutsch connector to the light bar. Line that up and push it in. It snaps and locks into place. Then on the other end, we'll take the one wire that has the 3 in it, and then, you'll take . Again, you set of detailed instructions will show you how to connect all of this. On your illuminated switch, there is a 1, 2, and a 3 listing on the pole. What you'll do is the red goes to the 1. We'll just go ahead and push that on. The blue goes to the middle one, which is the 2. Push that on. Then, the black goes on to the 3 post. We've got the illuminated switch all on there. Then, the last wire is our power. Again, the fuse is in there. We'll take the black wire and hook it to our ground. That's our ground wire. We'll take our red wire and hook it to our 12-volt power. There we go. Get those separated. Make sure they don't touch. Now what I'm going to go ahead and do is turn on the 12-volt power. Go ahead and turn off our overhead lights to give you an idea. It's dark now. Let me show you, here's the switch. You'll see when I push this switch, you can see that it illuminates to show you that lights are on. When you turn it off, it a round rocker switch. Turn it off, the lights are off. Turn it on. Then again, just to show you how bright it is. You can see the very bright. Again, it's 9 LEDs at 3 watts each, so 27 watts. Now what we're going to do is let me turn around and show you the pattern on the wall. You can sort of see the pattern it gives off. Again, it's a narrow 15-degree spot beam. Again, here's our switch. We'll just turn it off. We'll go ahead and turn off our 12-volt power. Go ahead and turn on our overhead lights. That should do it for the review on part number P10010. This is the Putco high power 9 LED Luminix off-road light bar, 27 watts and a 15-degree spot pattern. .


Customer Reviews

Putco Luminix Off-Road LED Light Bar - 3,600 Lumens - Narrow Spot Beam - 10" Long - P10010

Average Customer Rating:  5.0 out of 5 stars   (1 Customer Reviews)

Slim, low-profile aluminum LED light bar has multiple lenses to illuminate an area. Durable and lightweight bar has a 15-degree spot beam for focused light. Mounting hardware, universal brackets, and wiring harness included. 9 Diodes.

- P2281L
by:

Review from a similar Putco High Power Luminix Bar in Off Road Lights


This item works like a charm, good light output with a wide field of illumination and best for off road use. The nice part is you can purchase an wireless remote to eliminate having to route a small harness and install the on/off switch. 602144


1
1

Ask the Experts about this Putco Off Road Lights
Do you have a question about this Off Road Light?


  • LED Light Bar for Gooseneck Flatbed Trailer
  • There may be a solution for you with the Putco High Power Luminix Off-Road Light Bar # P10010, which is a 10" long light bar with a narrow 15-degree spot beam. It does mount to flat surfaces, has a wiring harness which allows it to connect to a 12V battery and has an on/off switch. A remote control # P8770F is also available which has a 30 yard range. I've added links to video reviews for you to take a look at on this light bar as well.
    view full answer...

  • Light Bar for Reverse Lights That Will Work on Back of 2018 Chevy Silverado 1500
  • There may be a solution for you, though each of the back-up lights we have available are for trailers and are going to be recess or surface mount, so if your topper is at an angle the lights will be as well. A better option for you would be the Bully Fire Strip LED Light # BLS-1103, which are LED lights and will plug into your 4-way to give you additional running, brake, turn, hazard, and reverse lights. If you want to really light things up you could use a license plate mounting bracket...
    view full answer...

  • Dual Harness Compatability With Putco High Power Luminix Off-Road Light Bar - LED # P10010
  • I reached out to my contact at Putco and have confirmed the Dual Wiring Harness with Switch for 4" Putco Luminix LED Block Lamps # P8769F will work for the Putco High Power Luminix Off-Road Light Bar - LED - 27 Watts - 15 Degree Spot - 10" Long # P10010. According to the manufacturer this should work perfectly together.
    view full answer...


Do you have a question about this Off Road Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality off road lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate off road light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Amy B
Photos by:
Zach O
Updated by:
Sarah W
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924