1. Mud Flaps
  2. Husky Liners
  3. Custom Width
  4. Front Pair
  5. Plastic
  6. Custom Fit
Husky Liners Custom Molded Mud Flaps - Front Pair

Husky Liners Custom Molded Mud Flaps - Front Pair

Item # HL56791
lowest price pledge
Retail:$60.95
Our Price: $41.01
You Save: 33%
Mud Flaps

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 2 lbs
Quantity: 
In Stock
Husky Liners Custom Fit - HL56791
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Protect your vehicle from mud, rocks and road debris with this pair of mud guards. Extremely durable, thermoplastic construction is both weather and impact resistant. Sleek, contoured design and black finish pair for great-looking, functional guards. Fastest Shipping and Guaranteed Lowest Prices for Husky Liners Custom Molded Mud Flaps - Front Pair. Read our customer reviews of Husky Liners mud flaps. Call 800-298-8924 for expert service or order your mud flaps part number HL56791 by Husky Liners online at etrailer.com.
  • All Info
  • Reviews (249)
  • Q & A (1)
  • Videos (2)
  • Photos
  • Why etrailer?

Husky Liners Mud Flaps - HL56791

  • Custom Width
  • Husky Liners
  • Front Pair
  • Plastic
  • Custom Fit
  • Drilling Required
  • Mounts Inside Fenders

Protect your vehicle from mud, rocks and road debris with this pair of mud guards. Extremely durable, thermoplastic construction is both weather and impact resistant. Sleek, contoured design and black finish pair for great-looking, functional guards.


Features:

  • Mud flaps protect your vehicle - and the ones around you - from mud, rocks and flying debris
    • Keep doors, quarter panels and running boards clean
  • Contoured and form fit to exterior fenders for maximum coverage
    • Longer and wider than most OE flaps
    • Full tire tread coverage
  • Durable, impact-resistant thermoplastic construction
  • Custom fit for your vehicle
  • Black, textured finish and sleek design add style to your ride
  • 2 Front flaps, fasteners and installation instructions included
  • Made in USA
  • Limited lifetime warranty


Husky Liners' custom-molded mud guards are tailored to perfectly fit your vehicle's front fenders. They are longer and wider than traditional, factory mud flaps, giving you a mud guard that looks great, fits great and provides the most coverage possible.



56791 Husky Liners Mud Guards - Front



This Product Fits The Following Vehicles



California residents: click here


Video of Husky Liners Custom Molded Mud Flaps - Front Pair

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Husky Front Mud Flaps Installation - 2014 Chevrolet Silverado 2500

Today on our 2014 Chevy Silverado we'll be installing Husky custom molded mud flap for the front axle part number Hl56791 . Now to begin our install, we first go ahead and remove the front wheels to make it easier to remove the mud flaps. Next we'll go ahead and clean the painted surface where the mud flaps will be mounted. Now as it's thoroughly cleaned, we apply an application solution and a protective film that will go underneath the mud flap to prevent the mud flap from rubbing directly on the paint. We'll use dry cloth and or a squigy or a sponge to push the application solution out from under the film and and then allow it to dry. Now, once our protective film is dried, we're ready to install the mud flaps. To install this mud flap, we first remove three of the manufacturers fasteners.

Two screws and a push pin fastener. At the attachment point where we remove the manufacturers push pin fastener, we'll install a metal clip so, we can use a screw fastener. The metal clip will slide over the sheet metal just underneath the plastic wheel liner lining up with the manufacturers hole. Now, once that's in place, we can go ahead and install the new mud flap. We'll use the new screw fasteners to secure it directly to the vehicle. Now with the three screw fasteners on the inside of the wheel well securing it, we'll move underneath the mud flap and using an 8 inch drill bit as per the instructions we'll drill a pilot hole for our fourth screw fastener that will go directly in the sheet metal. Now, with all four fasteners in place and our mud flaps secured, we'll move over to the passengers side and repeat the same process.

With both sides now installed, we reinstall the front wheels and we're ready to hit the road and that does it for the install. The Husky custom molded mud flaps, part number Hl56791 on our 2014 Chevy Silverado. .


Customer Reviews

Husky Liners Custom Molded Mud Flaps - Front Pair - HL56791

Average Customer Rating:  4.8 out of 5 stars   (249 Customer Reviews)

Protect your vehicle from mud, rocks and road debris with this pair of mud guards. Extremely durable, thermoplastic construction is both weather and impact resistant. Sleek, contoured design and black finish pair for great-looking, functional guards.

- HL56791
by:
2010 Chevrolet Silverado

Two screws for what ever reason stripped upon trying to screw them into the factory holes when mounting the mud flaps. Fortunately I could use the factory screws to switch out with. The mud flaps look great. I will buying a matching pair for the back soon. 141606



- HL56791
by:

great product 121506



- HL56791
by:
2013 Chevrolet Silverado

arrived quickly went on fast great instructions look great 83859



- HL56791
by:
2013 Chevrolet Silverado

Nice mudflaps easy to install 69713



- HL56791
by:

The mud flaps arrived promptly. I installed them today, and am very satisfied with the ease of installation, and how well they fit. Everything required for installation was included. 62815



- HL56791
by:
2012 Chevrolet Silverado

Received product in good order. Than ks, Deb 61195



- HL56791
by:
2013 Chevrolet Silverado

Installed the Front and Rear sets on my 2013 Silverado. Fit was very good, install took about 1 1/2 hours total. With a Right Angle Drill you do not have to take the wheels off. Look and coverage of these is much better, in my opinion, then the OE Mud Flaps. Etrailer, again, had these to me 2 days after I placed my order. Top notch place to deal with! 55521



- HL56791
by:
Chevrolet Silverado

bought both front and rear for my new silverado which was way cheaper than what the chevy dealer wanted. looks good and fit real nice 51695



- HL58001
by:

Review from a similar Custom Molded in Mud Flaps


Great customer service. Fast response to oder. Item fits perfectly on vechile. 71747



- HL56881-HL57881
by:

Review from a similar Custom Molded in Mud Flaps


Just what he was looking for, just need to get them installed. Looks like a quality product. Would order again if needed. 661759


Comments
Very good product holding up well
Susan - 06/23/2020

81826

- HL56801
by:

Review from a similar Custom Molded in Mud Flaps


Overall I like them. I got them to keep the mud and snow off my running board. They do a decent job of that. I think if they were a few inched longer it would be perfect. I have em on both vehicles and would buy em again. 441822


Comments
Working Fine. Both sets on 2 different vehicles work as designed.
Jeff H - 10/14/2018

44604

- HL57871
by:

Review from a similar Custom Molded in Mud Flaps


Great fit, easy install. Look great! 568085



- HL58441-HL59441
by:

Review from a similar Custom Molded in Mud Flaps


Easy to install and looks great. One year later they look like new. Great quality AA++ 591723



- HL57181
by:

Review from a similar Custom Molded in Mud Flaps


The mud flaps were easy to install, look great and enhance the appearance of my dually! 446497



- HL57301
by:

Review from a similar Custom Molded in Mud Flaps


Perfect fit for the S10 ZR2 with factory flares; uses one of the factory mounting screws and then you drill two new holes. Took about an hour to install as I removed the tires. Will have to see how they hold up to the wind - may come back and add a little silicone adhesive for extra security. 80521



- HL57251
by:

Review from a similar Custom Molded in Mud Flaps


I installed these Mud guards on a 1996 GMC Dually with factory dually flares. They fit and look like they belong with the factory dually flares - exceeded my expectations. All I did was slot two holes to allow for factory variances in panel fit (occurs on all vehicles) and I replaced the supplied sheetmetal screws with stainless quarter inch bolts/nuts for stronger attachment points. Very easy installation. This fit and custom look is far better than flaps blowing in the wind. Highly recommended! 129195



- HL56881-HL57881
by:

Review from a similar Custom Molded in Mud Flaps


Good product so far - just installed them yesterday. The wear protection film wasn't pre-cut, but was easy enough to trim to fit using scissors, and I just stuck the film directly to the truck without using the soapy water solution called for in the instructions. The film stuck to the truck just fine, and the flaps fit perfectly and look great. 456764



- HL56881
by:

Review from a similar Custom Molded in Mud Flaps


Nice fit and very easy install. Screw holes lined up perfectly. 556274



- HL57181
by:

Review from a similar Custom Molded in Mud Flaps


Great addition to my truck and they work as good as they look. Super simple install and looks factory equipped. Excellent fit and they appear to be durable also. etrailer is an excellent choice for parts and excellent customer service. Thank you Stacy.. 634760



- HL56511
by:

Review from a similar Custom Molded in Mud Flaps


Great fit! Easy to install on my 2007 SD 250 w/Factory Fender Flairs. I received a call from one the trailer reps to let me know my order would be delayed. The unit was out of stock. I was offered to have my shipment delivered direct from the manufacturer at no cost to me. What a great company to deal with...I will be ordering other items in the future. 219530


Comments
G_R_E_A_T ProductII Would recommend to all.
James H - 08/14/2016

20233

- HL57191
by:

Review from a similar Custom Molded in Mud Flaps


The mudflaps installed easily for the most part. I still have to drill some holes for the rear mudflaps. I need a right angle drill, so I don't have to remove the dually wheels in order to drill the holes. These seem nice and sturdy and well made. I am not sure of the length of the rear flaps yet, seems they should be longer than they are. Good product, haven't tried them out yet to see if they deflect debris well. I am hopeful. 584363


Comments
After install I have been very pleased with the fit and finish, they work as they should.
Ken - 11/22/2019

63472

- HL56681
by:

Review from a similar Custom Molded in Mud Flaps


Website was good about choosing which mud flaps were right for the vehicle. I ordered, and within minutes received a phone call from etrailer saying they were on back order and would be shipped on a certain day. Sure enough, they were. The flaps are far better quality than came from the dealer (the back ones). Instructions are easy, and the flaps fit exactly on my truck, and very easy to put on. Holes matched perfectly, and they're on in just a few minutes. 114723


Comments
Thank you for the note and followup. Its a first for me from any company, frankly! The product is still as I stated, holding up like new, and just no problem whatsoever.
Doug W - 01/27/2015

8972

- HL57181
by:

Review from a similar Custom Molded in Mud Flaps


Received product in good conditions... easy to install took about 30 minutes,, but I had to drill a few holes. 547094


Comments
Installed easy and still looking like new
Glenn M - 07/28/2019

58320

- HL59411
by:

Review from a similar Custom Molded in Mud Flaps


Super easy and fast install. Look great. Covers tire tread. Mounted without even having to turn or remove wheels. Removed factory screws, placed guards into position with holes which lined up exactly and re-installed screws. Very pleased with Husky product and etrailer service. Will be ordering fronts now. 111111



- HL56881-HL57881
by:

Review from a similar Custom Molded in Mud Flaps


I haven't gotten then put on yet, but I did fit them in place. They fit perfectly on mauck up. I do wish they were a bit longer in the rear, I'll see how well they work on my muddy roads. Not really clear on the instructions of the paint protectors. 562030


Comments
Basically you want to place the film on the fender where the mud guard will touch. Clean that area of the fender with a adhesive solvent. A solvent will insure there is not any residual wax, grease or dirt left on the area of the fender you will be placing the film on. After cleaning the fender, create a wetting solution with 4 ounces of liquid dishwashing detergent and 1 pint of water. Take the backing off the film and spray the sticky side of the film with the solution. Spray the fender with the solution. Place the sticky side down on the fender and flood it with the solution. Then press the bubbles out of the film with a sponge. Allow to dry before putting on the mud flaps.
-- Heather A - 09/06/2018

43268
32
268
Show More Reviews

Ask the Experts about this Husky Liners Mud Flaps




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality mud flaps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate mud flap information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Video Edited:
Joshua S
Test Fit:
Nicholas E
Expert Research:
John H
Updated by:
Daron K
Updated by:
Erin H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.