B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring
(319 reviews)
Price: $380.00
In Stock
B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring
Item # BWMC2301
Retail:$472.54
Our Price: $380.00
You Save: $92.54
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (319)
- Q & A (0)
- Photos
B and W Motorcycle Tie Down Straps - BWMC2301
- Clamps
- Trailer
- B and W
- Tie Down Anchors
Secure your bike in your trailer quickly and easily with this clamping tie-down system. No straps or chocks needed. Just mount the clamping bar to your bike, drive over the trailer-mounted plate, and your motorcycle will automatically latch in place.
Features:
- Motorcycle tie-down system secures your bike to your trailer
- No straps or wheel chocks needed
- Automatic-latching device is fast and secure
- Bolt latching base plate to trailer floor
- Mount clamping bar to bike
- Drive bike onto trailer, over plate, and latch automatically engages to clamp around bar, holding bike in place
- Neoprene-lined clamps on bar won't scratch finish
- Motorcycle becomes extension of trailer's suspension for smoother ride
- When bike's secured, its suspension remains slightly compressed for rigid stability and minimal stress on suspension components
- Mounting hardware for base plate included
- Drilling required to bolt plate to trailer floor
- Made in the USA
Specs:
- Application: Harley-Davidson Touring motorcycles
- Frame tube diameter: 1-1/8" - 1-1/4"
- Frame width: 10" - 14-1/2"
- Mounting plate dimensions: 25" long x 6-3/4" wide
- Distance between mounting holes center to center: 23-1/4"
- 5-Year limited warranty
Note: The Biker Bar is designed to secure a motorcycle that is pointed in the direction of travel only.
With B&W's Biker Bar, it's never been easier to secure your motorcycle for travel. Just bolt the latching plate to the floor of your trailer, and clamp the included bar to your bike's frame. Once both components are appropriately mounted, simply drive your motorcycle onto your trailer, over the latching base plate, and the bar will automatically latch into the base. No straps or wheel chocks are needed.
Not only does this motorcycle tie-down system make it fast and easy to connect your bike to your trailer, but it also makes it safer and more secure. Because there are no tie-down straps, there are no buckles or hooks to rub against your bike, potentially scratching your paint or trim. And because the bar attaches to your motorcycle's frame, this system provides more stability than tie-downs alone. In fact, the Biker Bar system is designed not only to secure your bike, but also to create a natural ride for it during trailering. Once hooked up to the latching plate in your trailer, your motorcycle's suspension is effectively linked with the suspension system of the trailer, eliminating undo stress on your bike.
Installation
Installation of the Biker Bar is simple. The bar itself clamps to your bike's tubed frame, just behind the transmission. Be sure to clear any potential obstacles, such as hydraulic lines or wiring harnesses, that could get caught between the clamps and the frame. The clamps on the bar are lined with neoprene to prevent scratches to your bike's frame.
Once you have the bar securely clamped to the frame of your bike, ride the bike onto the trailer to determine the location where you want the bike to attach. Mark that spot on the floor of your trailer so that you can bolt down the latching plate. You will have to drill into your trailer's floor to attach the plate.
The final setup step is to adjust the height of the latching base. Once the base is bolted to the trailer's floor, ride the bike over it until the bar is directly in front of the base. Measure the distance from the middle of the bar to the trailer's floor. Your bike's suspension must be slightly compressed while latched down to appropriately stabilize the bike during transport. So you must remain sitting on the motorcycle while taking this measurement. Once you have this measurement, remove the bar from the bike and place it in the latching base. Adjust the height of the base until the bar is the same distance from the floor as it was when on the motorcycle. The base adjusts in 1/4" increments, so the height may not be exact. As long as the bar is within 1/4" of your initial measurement, setup is complete.
MC2301 B and W Biker Bar Motorcycle to Trailer Mount for Harley-Davidson Touring Bikes
Installation Details
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring - BWMC2301
Average Customer Rating: 4.9 out of 5 stars (319 Customer Reviews)
Secure your bike in your trailer quickly and easily with this clamping tie-down system. No straps or chocks needed. Just mount the clamping bar to your bike, drive over the trailer-mounted plate, and your motorcycle will automatically latch in place.by: Leane08/08/2022
We just got 2 bars installed in the toy hauler and did a test run. Everything appears to be on the up and up and are happy with the product, how it mounts/locks into place, and appears to be a game changer to all the straps and tie downs from the past
by: Mike 08/26/2022
Once I set the Biker Bar up and found out how to load the bike it was great. After loading the bike I took it for a ride and the handlebars turned on the bike. I had a hard time finding out why. The website said adjust the bar down and e-trailer said I had it down too much. I found that when I loaded the bike there was a preload on the front suspension. I now load the bike and with the bar latched turn the steering left and right a couple times and the preload goes away. Towed the bike 5,500 miles and it never moved.
Mike
8/26/2023
The Biker Bar works great. I never have to worry about the bikes moving and they are easy to load. They are worth the money.
by: Michael03/22/2023
The biker bar was delivered quick! Installation was pretty easy just using the directions, but there are multiple videos if you get stuck. The only problem I had was not with the biker bar system, but with the Harley. I have a bracket for my crossover pipes that interfered with the bar clamp position. It caused the bar to be either too far forward interfering with the kick stand, or too far aft of center. I wound up cutting a 3 inch section out of the bracket to give me access to the frame. From there it was gravy. I've got a 3600 mile trip coming up. If the bike stays solid like it is right now, I expect no issues. If there are problems, I'll let you all know.
by: Frank 10/05/2022
Bought Biker bar to better secure my bike while trailering. Bought extra set of mounts to place in toy hauler so biker bar can be used in trailer or toy hauler and so far has worked great!!
Frank
10/6/2023
Still working great, at Myrtle beach bike week now and traveled from Maryland with no issues at all!
Mike L.
10/21/2023
@Frank Great, we're glad to hear that Your # BWMC2301 B&W Biker Bar is working well for you! Have Fun!
by: Tom F.09/02/2017
I bought three of these to use on a open car hauler type trailer I had made to trailer my three Harleys, two Wide Glides & a Road Glide Ultra. The trailer is 20' long which includes a 30" dovetail. It has two 3500 lb axels and is 82" wide inside fender to fender. The Biker Bar performs as advertised. No need for tie down straps. I trailered these bikes 900 miles from Missouri to Colorado and back, along I-70. I-70 in spots, especially going through Denver can be pretty rough. Lots of dips and bumps across all the overpasses. The Biker Bar held the bikes great with no problems. I used some cheap wheel chocks from Harbor Freight on the front wheels to keep the front wheel from flopping, but found out they were not really necessary when the Biker Bar is adjusted properly. Will not use them on the next trip. The Biker Bar is easy to install, just read the instructions and watch the video etrailer provides. B&W you could make the install a one man job if you provided a 3/16" dia hole in the plates that mount under the trailer. This would allow you to use a temporary screw to hold the plate in place while you drill the holes for two permanent bolts. I used a drywall screw and a fender washer to hold the plate in place. Also the two 5/8" dia bolts that hold the Main plate, are not long enough to go through a 1-1/2" board. I had to buy new bolts an inch longer. Other than that, I really am pleased with the "Biker Bar".
Tom F.
9/4/2018
Love them!
by: Jeff B.02/05/2020
I love the B&W Biker Bar. We have pulled my HD Ultra Limited in an enclosed trailer behind our RV over 28 states so far. It loads and unloads in minutes, and has never moved at all, even through several full-brake lockdowns and all of the potholes that the northeast US could throw at us! It is a well-designed product. My only question now is what do I do with all of those old straps I used to have to use [Thumbs Up]
Jeff B.
2/6/2021
Another year into our cross country tour in the RV and I am still loving my Biker Bar. This is one of the best designed, high quality products I have ever used. Perfect!
by: Mark B11/29/2023
This product is amazing! My only regret is not ordering one sooner before straps messed up my paint. If you trailer your Harley anywhere, this is a must have!
by: Tracy11/01/2019
Finally can write review after 600ml trip. Rock solid! Bike becomes part of trailer. Front wheel dosen't even budge.Had to have underside plates replaced because supplied one's too small for my trailer,(wielding shop fixed that). Pat at etrailer was great! Would and have recommended.
Tracy
11/3/2020
The Biker Bar works great.Love it! Gives us travel options and enables longer trips.very well made 4 stars! Would give 5 but under side plates too small and had to have bigger ones made. Handles 800 lb Road King great
by: Shad 07/15/2023
Work amazing! Very well built product. Bike attaches to mounting plate and does not move. Takes very little time to install the bar on bike and load in the trailer. Not using straps is the best thing about it.
by: Gary K04/04/2019
Easy to install, both in trailer & on bike (1984 Tour Glide). Secured bike for 2,700 km trip from Ontario to PEI (friend towed it there in my cargo trailer). No shifting of bike during trip, regardless of road conditions. Haven't used since then but keeping nearby, just in case. Very well made product that works as advertised.
by: Charlie 07/19/2023
I’ve tried different tie downs, and “the Biker Bar” is by far the best and safest way to transport my motorcycle hands down! No Worries!
by: Kevin06/01/2016
Best invention since the light bulb. Installed in 20 mins and loaded the bike in 2 mins. I have seen this product at a bike rally and had to have one. No more straps.... I have experienced $5,500 in damage when my buddies bike fell over onto mine in my trailer that was secured by straps, if I owned a biker bar then I never would have needed to file a claim on my insurance.
Kevin
1/23/2018
Love it. Best invention since the paperclip. Greatest item ever to transport you bike. I tell everyone about it.
by: Shane11/15/2022
Very highly recommended. I have put (2) 16' trailer and (1) in my 12' trailer. I use them to haul my antique motorcycles and/or 2020 Limited. Takes some effort to properly install but well worth it. Can be easily removed to clear the floor. My 46FL, 48EL or the 937lb 2020 Limited and takes less than 2 minutes to secure. Though probably not needed, I added 4 Cargo Buckles for each bike for yucks. Secure as hell, no movement round trip from Virginia to Sturgis. No bouncing wear on bike suspension.
by: David 07/29/2023
I love it. I have buddy's that want to get 1. My bike is up front of a 5 bike trailer, I ride mine in and stand back while they sweat their buttons off, it's awesome.
by: Steve 09/10/2023
Tie down looks very strong and should do the job well. E trailer has fast shipping. Got these in before the trailer was finished.
by: James09/01/2022
This is my second system, I was impressed enough by the first one that I bought a second one for my other Harley.
by: Mike F.10/18/2023
Well worth the money. No more straps.
by: James 06/27/2023
Works absolutely perfect. My bike, a Harley electric glide ultra, didn't even budge in the trailer after a 3000 mile trip. I would recommend it to anyone who needs to haul their bike, anywhere. Thank you!
by: Jim 07/23/2023
Had to modify exhaust bracket on my ‘16 Street Glide. The kickstand issue will also be a hassle. Otherwise super quality product. A little more time than expected to get it all set up. Bike is very secure. Will let you know more when I put some mile down with it in the trailer
by: Kevin 02/27/2023
This biker bar was awesome! We traveled from Pennsylvania to Sturgis South Dakota. I even hit a few curbs in some hotel parking lots rocking the trailer some! Lol! Didn’t try that! Lol! Bikes didn’t move an inch. We traveled over 3500 miles round trip!
We were traveling with people that used the tie down method. They were tightening straps on the way. I would recommend these anytime. So easy to use. A lot of time saved when traveling. Drive on the trailer and click. You are done. Just that simple.
by: Jack 05/05/2023
This is a great device, I've trailered my bike several thousand miles without incident. I will say that you have to make sure you are exactly square with the base when you lock it in or getting it our of the locks is very difficult.
by: Bruce 02/03/2023
We are full time RV'rs and our HD Ultra Classic is always in the trailer garage when we head down the road. The biker bar is so simple to use and works great. Drive the bike in until it automatically latches in the base, check the tightness of the bar clamp, and your done. I do add three safety pins in the supplied holes for a better peace of mind though. Highly recommend this high quality device for trouble free hauling for a motorcycle.
by: James04/22/2021
two reasons I got this one as you can see so I can put my MC on the lift without worrying about dropping it , love it. Other will be to putt on my trailer.
by: William04/19/2019
I recently installed the biker bar in my 24 foot enclosed trailer. It was a very easy installation that took about 45 minutes. After the installation I locked in my 2016 ultra limited low Harley davidson. It was a perfect fit. I was and still am amazed how great this system holds my bike down and totally locks it to my trailer. The next day I had to do a test just to make sure my bike would be okay on long trips. So I drove my trailer around doing normal and slightly aggressive braking and quick turns. After about an hour or so I pulled over into a parking lot. I opened the side door to my trailer and there my Harley davidson was still upright and looking good. By the way you do not need any other tie down with this system. This is the best system ever!
by: Robert 06/20/2023
Rock solid tie down system. Florida to Sturgis SD twice, no problems.
25
307
Show More Reviews
See what our Experts say about this B and W Motorcycle Tie Down Straps
- B&W Biker Bar Compatibility With Custom Harley and Street GlideThe B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson 1-1/2" Custom Frame # BWMC2304 will fit frame tube diameters between 1-3/8" - 1-1/2" and frame widths between 10" - 14-1/2". The B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring # BWMC2301 is similar and fits the exact from widths but tubes that are 1-1/8" - 1-1/4". The mounting bases are the same so you could use that portion of his system, but you will need the Replacement...
view full answer... - Should B and W Biker Bar be Difficult to Get Bike Attached toYou might check to see if the setting of the clamp of your Biker Bar part # BWMC2301 needs to be adjusted. It sounds like there is a height difference that is causing the difficulty in getting the bar attached to the rest of the assembly.
view full answer... - Which B&W Biker Bar for a 2008 Harley-Davidson FLHX Street GlideYour 2008 H-D Street Glide is considered a 'Touring Model', which means that the # BWMC2301 you referenced would indeed be the correct Biker Bar for your bike. You can confirm this by verifying that the frame tubing diameter is 1-1/8" - 1-1/4" and the Frame width is 10" - 14-1/2" If you click the provided link, you can see a video showing a typical installation.
view full answer... - Troubleshooting 2020 HD Ultra Limited Kickstand Won't Retract All the Way With Biker Bar InstalledI reached out to B&W about your # BWMC2301 and they said you need to take the kick stand and kick it out and over the bar itself. The kick stand is spring loaded and will move right over the bar. It should work with no problem. Generally you can use your foot to do it while you're on the bike.
view full answer... - Correct B&W Biker Bar Motorcycle Tie-Down System for a Harley Davidson Road GlideThe correct B&W Biker Bar Motorcycle Tie-Down System for a Harley Davidson Road Glide is the part # BWMC2301.
view full answer... - Are Wheel Chocks Required with the B&W Biker BarI am sure you could still use a set of wheel chocks in addition to the B&W Biker Bar Motorcycle Tie-Down System part # BWMC2301 but they will not be required. The B&W Biker Bar is all you are going to need to secure your motorcycle. It will resist both side/side and back/forth motion. Once the bike is clamped down on the bar, it should feel stiff and the handlebars should not move.
view full answer... - Will B&W Biker Bar Tie Down System Fit a 2007 Victory JackpotThe B&W Biker Bar # BWMC2301 is designed for Harley touring bikes but it is possible that it could work with other bikes. If the frame on your Victory (at the bottom of the bike) is 1-1/8 inches to 1-1/4 inches in diameter and the frame width is 10 to 14-1/2 inches apart then it would work.
view full answer... - B and W Biker Bar Tie Down System for Harley Road Glide UltraThe B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 is a fit for Harley-Davidson Touring such as your 2017 Road Glide Ultra so long as it has a frame tube diameter of between 1-1/8 inches and 1-1/4 inches with a frame width of between 10 inches and 14-1/2 inches. The air ride is not going to affect the fit and the system is height adjustable so as long as you have between 5 inches and 6-1/2 inches from the side of the frame tubes to the ground you will be fine. I've added links to...
view full answer...
- Which B&W Biker Bar Fits a 2016 Harley Davidson Ultra Classic Limited Low FLHTKLYes. I was able to confirm with my contact over at B&W that the B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring # BWMC2301 will also fit on your 2016 Harley Davidson Ultra Classic Limited Low FLHTKL. I've linked an installation video of this biker bar for you to check out, as well.
view full answer... - What Damage Could Possibly Occur if B and W Biker Bar Was Compressing Bike SuspensionMost likely your suspension is fine if it was slightly compressed and the wheel turned. In an extreme situation it might twist the forks of the bike in the steering stem a bit which would cause the handle bars to almost feel like they are bent plus it could also blow out fork seals if the compression was too extreme.
view full answer... - Are Straps Needed When Securing Bike with B&W Biker Bar Motorcycle Tie-Down System # BWMC2301Straps really aren't needed when using the B&W Biker Bar Motorcycle Tie-Down System # BWMC2301. Since it does such a great job securing the bike by the frame chocks and straps just aren't needed.
view full answer...
- Will B&W Biker Bar BWMC2301 Fit 2016 HD Street Glide with 1-Inch Lowering KitThe B&W Biker Bar #
view full answer... - Will The B&W Biker Bar Motorcycle Tie-Down System Fit a Street Glide With Air Ride & Center Stand?Yes, you will be able use the B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 on your 2016 Harley Davidson Street Glide. The mounting base is height adjustable to work with the air ride you have on your bike. The attachment bar for the frame will attach forward of the center stand so they will not interfere with each other.
view full answer... - Which B and W Biker Bar Fits 2013 Harley Davidson Ultra ClassicFor a 2012 Harley Davidson Ultra Classic the correct Biker Bar is the # BWMC2301 that you referenced.
view full answer... - Biker Bar Installation and Use with Lowered 2014 HD Ultra ClassicBecause the B&W Biker Bar # BWMC2301 is height adjustable, it provides you with the ability to move the bar up or down in 1/4" increments. It looks like the lowest setting is 3-3/4" and the highest setting is 6-1/2" inches-so if your bike has 5" of clearance you should be able to adjust the biker bar to fit. If your bike is still sitting too low, you could use small plywood sheets under the wheels to raise it up a bit, but you would need to make sure that those plywood sheets are secured...
view full answer...
- Recommended Biker Bar for a Harley Davidson Tri-GlideI have spoken with B&W about this question before and they have confirmed that the B&W Biker Bar item # BWMC2301 will indeed work with a Harley Tri-Glide. I have linked an installation video below.
view full answer... - Determining if B and W Biker Bar Can Fit 2017 Indian Chief DarkhorseWhile there isn't a custom fit Biker Bar that fits your Indian motorcycle B and W has given us a way to determine if a bike can fit the # BWMC2301 that you referenced. If you check out the attached picture you can see how to determine this.
view full answer...
- Is the B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 Easily RemovableThe B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 will be bolted to the toy hauler floor so to remove it you would have to un-bolt it from the floor every time you needed to move it. While not difficult to do, especially with power tools, it may be too much of a hassle for it to be a viable solution.
view full answer... - Will B&W Biker Bar Motorcycle Tie-Down System Work With 2016 Harley Road Glide?The B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 is a fit for Harley-Davidson Touring such as your 2016 Road Glide so long as it has a frame tube diameter of between 1-1/8 inches and 1-1/4 inches with a frame width of between 10 inches and 14-1/2 inches. The air ride is not going to affect the fit and the system is height adjustable so as long as you have between 5 inches and 6-1/2 inches from the side of the frame tubes to the ground you will be fine. I've added links to a pair...
view full answer...
- B and W Biker Bar for 2021 Harley Davidson Tri GlideWe've checked with B and W before and they have told us that for the Harley Tri Glide the correct Biker Bar is the part # BWMC2301.
view full answer... - Will Using the B&W Biker Bar Put Too Much Stress on the Frame of a Touring HarleyI spoke with our resident Harley guy about what he thought of the B&W Biker Bar Motorcycle Tie-Down System for Trailers # BWMC2301 if he were to use it with his bike. Since the bike frame is designed to support not only its own weight but also the weight of the rider and some gear it is plenty strong enough to be secured by the Bike Bar. Also, it is holding the frame at the lowest point closest to the center of gravity so side to side movement won't be an issue and neither will be up and...
view full answer... - Recommended B&W Biker Bar for a Harley Davidson Tri Glide Yes, it does. The B&W Biker Bar Motorcycle Tie-Down System item # BWMC2301 will work with your Harley Tri Glide. B&W has confirmed this information with us.
view full answer... - B and W Biker Bar Motorcycle Tie Down Recommendation for a 1985 Harley FXRS Low GlideSince your Harley isn't one of the standard fits that they have a B and W Biker Bar designed for you would need to use the Custom Frame version part # BWMC2304 which can fit basically any Harley Davidson frame available due to how adjustable it is.
view full answer... - B and W Biker Bar that Fits Harley Electra Glide and Road GlideFor the Electra Glide and Road Glide the part # BWMC2301 is correct but we do not have anything that is a confirmed fit for the 750 Street. I wish there was a more universal fitting option that I could guarantee would fit all three but 2 out of three ain't bad right?
view full answer...
Do you have a question about this Motorcycle Tie Down Strap?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lindsey S
Video by:
Joshua S
Video by:
Kathleen M
Video Edited:
Jacob T
Video Edited:
Chris R
Installed by:
Cole B
Installed by:
Andrew S
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Leane
8/9/2023
Still great!! We’re on the road again, using the Biker Bars and having no issues! Fabulous product!