bing tracking image
  1. Lubricants Sealants Adhesives
  2. Loctite
  3. Sealant
  4. Multi-Purpose Sealant
  5. 1.22 oz
Loctite Sleeve Retainer 640 - High Strength/High Temp - Green - 1.22-Fl Oz Bottle

Loctite Sleeve Retainer 640 - High Strength/High Temp - Green - 1.22-Fl Oz Bottle

Item # LT37484
Retail:$48.61
Our Price: $29.69
You Save: 39%
Lubricants Sealants Adhesives
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.22 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Liquid sleeve retainer, or bearing mount, strengthens the fit between non-threaded, smooth, cylindrical assemblies that rely on tight clearances and friction to maintain the connection. Designed for high-temperature and close-fit applications. Fastest Shipping and Great prices for Loctite Sleeve Retainer 640 - High Strength/High Temp - Green - 1.22-Fl Oz Bottle. Read our customer reviews of Loctite lubricants sealants adhesives. Call 1-800-940-8924 for expert service or order your lubricants sealants adhesives part number LT37484 by Loctite online at etrailer.com.
  • All Info
  • Reviews (12)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Loctite Lubricants Sealants Adhesives - LT37484

  • Sealant
  • Multi-Purpose Sealant
  • 1.22 oz
  • Loctite

Liquid sleeve retainer, or bearing mount, strengthens the fit between non-threaded, smooth, cylindrical assemblies that rely on tight clearances and friction to maintain the connection. Designed for high-temperature and close-fit applications.


Features:

  • Creates a tighter fit and prevents slippage when applied to non-threaded, smooth assemblies
  • Withstands higher temperatures than other bearing mounts - up to 400 F
  • Designed for tight clearances
  • Prevents treated parts from corroding
  • Requires heat and, for the tightest fits, a press or puller to disassemble parts
  • Made in the USA


Specs:

  • Application: press-fit or slip-fit assemblies with clearances to 0.007" diameter
  • Quantity: 1.22-fl oz bottle (36 mL)
  • Sheer strength: 3,000 psi
  • Fixture cure (time required to become tacky): 1 hour
  • Full cure (time required to reach full set): 24 hours
  • Temperature range (endurance limits of threadlocker): -65 F to 400 F


Applications:
  • Bushings
  • Bearings
  • Oil seals
  • Ring gear bolts and differential lock pins
  • Cylinder sleeves
  • Valve guides
  • Valve seats
  • Woodruff keys
  • Gears
  • Pulleys
  • Liner assemblies


The following diagrams illustrate the use of Loctite sleeve retainer. Arrows on the gear and shaft illustration show the effects of heating and cooling. The parts can be assembled more easily if the gear is heated or the shaft cooled to make a looser fit between the two parts.


diagram of sleeve retainer applications

diagram of sleeve retainer applications


Loctite Sleeve Retainer 640 liquid is applied to the surfaces of parts to be joined. By filling up empty space (microscopic voids) on the surfaces of the parts, the sleeve retainer increases the area of contact between them, creating a tighter fit and preventing slippage.


This product withstands temperatures up to 400 F, whereas standard anaerobic bearing mounts withstand temperatures only up to 300 F.


To disassemble joined parts, heat to 500 F (requires about 5 minutes with a torch) to loosen the sleeve retainer; then remove while sleeve is still hot, using a press or puller, if necessary.


This sleeve retainer is anaerobic (hardens in the absence of air) and requires contact with an active metal to cure. Active metals (those that tarnish, corrode or rust) include brass, copper, bronze, iron, soft steel and nickel. If both parts to be joined are made of inactive materials, Loctite Klean 'N Prime primer must be applied to one of the surfaces for curing to occur. Inactive materials include plated parts, stainless steel, galvanized steel, magnetite steel, pure aluminum, titanium, magnesium, gold, silver, plastic, cadmium, Iconel, zinc, natural or chemical black oxide and anodized aluminum.


Klean 'N Prime can speed the cure rate of Sleeve Retainer 640. This is especially helpful when you are applying the sleeve retainer to any material, active or inactive, in colder temperatures (below 70 F). Klean 'N Prime also improves the performance of the sleeve retainer in applications with larger clearances by filling some of the space between parts.



Note: If used with Klean 'N Prime primer, sleeve retainer may reach fixture cure in 30 seconds; in this case, it is essential that parts be assembled quickly.



OEM symbol

This product is OEM specified: It is approved to meet specifications of original equipment manufacturers.



492147 Loctite Sleeve Retainer 640 - High Temperature

Alternate part number: 37484

Installation Details LT37484 Installation instructions


California residents: click here


Video of Loctite Sleeve Retainer 640 - High Strength/High Temp - Green - 1.22-Fl Oz Bottle

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Titan Uni-Servo Hydraulic Trailer Brake Assembly Installation

Today we'll be installing the Titan Servo Hydraulic Brake Assembly, part number t2351000. With the trailer raised up the first thing we'll do is go ahead and remove the brake line going to the old brakes. Next we'll go ahead and remove the whole brake assembly. Before installing the new Titan assembly we'll clean off the area making sure it's clean behind it.Now we'll install a new Titan assembly. We'll go ahead and use some blue Loctite, part number LT37484 around the bolt for added strength in connection with the nuts. Now we can go ahead and tighten the bolts down securely to our assembly.

With that done we can go ahead and reinstall the hub, the washers and the castle nut. Next we'll go ahead and install the grease cap. Now we'll go ahead to the back of the assembly and reinstall the brake line.To get our brake line reinstalled we would have to go ahead and bleed the brakes out which will consist of somebody activating the brake assembly and with the other person loosening up the valve behind the brake assembly. You have to do that several times until the fluid runs clear with no bubbles. Next we'll go ahead and adjust the brakes.

Using our brake adjusting tool we'll go ahead and tighten up the brakes until the drum cannot be moved by hand anymore.Then we'll back off about ten clicks which should end up with a slight dragging of the brakes on the drum. We'll keep that equal on both sides of the axle and that should finish it for our install and there you have it for part number t2351000.

Customer Satisfaction Score:


Customer Reviews

Loctite Sleeve Retainer 640 - High Strength/High Temp - Green - 1.22-Fl Oz Bottle - LT37484

Average Customer Rating:  5.0 out of 5 stars   (12 Customer Reviews)

Liquid sleeve retainer, or bearing mount, strengthens the fit between non-threaded, smooth, cylindrical assemblies that rely on tight clearances and friction to maintain the connection. Designed for high-temperature and close-fit applications.

by:

used to hold sealed wheel bearing in harley hub. every thing is doing well!




by:




by:

Great product!




by:




by:

Review from a similar Sleeve Retainer 640 in Lubricants Sealants Adhesives


Lowest price for the good stuff - Loctite 640 - in the 0.2 fl oz tube. Quick shipping, order well was packed - I'm a satisfied customer


Comments
I used the adhesive to secure a steel sleeve in a cast iron bore on a 4x6 bandsaw. The sleeve is still holding and the bandsaw works much better now that the spindles are parallel under load.
k. s - 10/18/2014


by:

Review from a similar Sleeve Retainer 640 in Lubricants Sealants Adhesives


Can't beat Loctite for fastener retention. Used it to retain a sleeve in a motorcycle which gets heat cycled a lot and, it dies the job well. Highly recommend this. Pudding was a breeze and, I received it quickly. Great ordering experience.




by:

Review from a similar Sleeve Retainer 640 in Lubricants Sealants Adhesives


Loctite is a great product does the job every time highly recommend it The green Loctite is good for press fittings used it on my intake manifold




by:

Review from a similar Sleeve Retainer 640 in Lubricants Sealants Adhesives


Very good product,works good and lasts long


Comments
Very good,bond is still holding
Daniel P - 12/28/2020


by:

Review from a similar Sleeve Retainer 640 in Lubricants Sealants Adhesives





by:

Review from a similar Sleeve Retainer 640 in Lubricants Sealants Adhesives





by:

Review from a similar Sleeve Retainer 640 in Lubricants Sealants Adhesives


Great product




by:

Review from a similar Sleeve Retainer 640 in Lubricants Sealants Adhesives




12
12

See what our Experts say about this Loctite Lubricants Sealants Adhesives




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate lubricants sealants adhesive information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Raymond P
Written by:
Raymond P
Employee Jameson C
Expert Research:
Jameson C
Employee Matthew S
Updated by:
Matthew S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.