Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long

Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long

Item # Y02-480B

lowest price pledge

Retail:$595.00

Our Price: $377.69

You Save: $217.31
Ladder Racks

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 18 lbs

Arrives before Christmas with Ground or Free Shipping.
Quantity: 
In Stock, Ships Today
Y02-480B - Drilling Required Rhino Rack Ladder Racks
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear. Fastest Shipping and Guaranteed Lowest Prices for Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long. Read our customer reviews of Rhino Rack ladder racks. Call 800-298-8924 for expert service or order your ladder racks part number Y02-480B by Rhino Rack online at etrailer.com.
  • All Info
  • Reviews (6)
  • Q & A (14)
  • Videos (1)
  • Photos
  • Why etrailer?

Rhino Rack Ladder Racks - Y02-480B

  • Rhino Rack
  • Roof Rack System
  • Truck Cap Ladder Rack
  • Sliding Rack
  • Over the Bed
  • Aluminum
  • Drilling Required
  • 2 Bar
  • Fixed Height
  • Light Duty

Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.


Features:

  • Adjustable roof-rack system lets you carry gear on camper shells, hard tonneaus, or hardtop resin roofs without headliners
  • 2 RTC-style tracks with dual C-channels provide adjustable mounting points for roof-rack legs
    • Tracks mount to your vehicle roof with T-bolts - some drilling required
    • Stainless steel construction with an anti-corrosion coating
    • Endcaps provide finished look for the tracks
  • 4 Quick Mount legs mount in the channels of tracks to create mounting points for crossbars
    • Durable, glass-reinforced nylon construction
  • Quick-release trigger system allows for easy, tool-free installation
    • Squeeze internal triggers to release legs from bases
    • Slide triggers apart to secure legs to bases
    • Bases remain mounted to tracks
  • Locks in covers let you secure the system to your vehicle
  • Pivoting bases offer 33 degrees of adjustment to help level crossbars
  • Precision-molded inserts cover bases when the legs are removed
  • 2 Vortex Aero black, elliptical crossbars hold ladder racks, conduit cases and other work accessories
    • Bars mount to roof-rack legs using built-in channels on bottoms of bars
    • Lightweight, structural-grade, extruded aluminum construction for strength, durability and maximum carrying capability
  • Built-in C-channel on top of each bar lets you mount Rhino-Rack accessories and carriers
  • Rubber strips in the channels help to cushion load and provide slip resistance
    • Can be cut to accommodate track-mounted accessories and carriers


Specs:

  • Weight capacity: 220 lbs
  • Track length: 63" per side
  • Crossbar dimensions: 54" long x 3-1/2" wide x 1-1/2" tall
  • Bolt length: 1-3/8"
  • Leg height: 3"
  • Limited lifetime warranty


The bases of these Rhino Rack legs easily mount into the included Rhino-Rack RTC-style roof rack tracks with included hardware. Just slide the nuts into the tracks, line up the mounting plates, and bolt the bases down. After this initial setup, you can leave the bases in the tracks.


Rhino Rack Quick Mount Base

Molded inserts help keep out dirt and provide a finished look when there are no legs and crossbars installed. To install a leg, simply remove the insert.


Rhino Rack remove the cover

Once you've set up the bases, installing and removing your roof rack is easy. The Quick Mount legs have an integrated trigger system that creates an easy, tool-free installation.


Rhino Rack internal triggers

To install a leg in a base, pinch and slide the internal triggers together.


Rhino Rack place leg on track

Lower the leg onto the base and slide the internal triggers apart to secure the leg in the base.


Rhino Rack replace cover

Once the leg is installed in the base, replace the cover and lock it to help secure the system to your roof.



Y02-480B Rhino-Rack Roof Rack System w/ 2 Aero Crossbars - Track Mount - Black - 54" Long



Y02-480B Installation InstructionsInstallation Details Y02-480B Installation instructionsY02-480B Installation InstructionsAlternate Instructions Y02-480B Installation instructions

This Product Fits The Following Vehicles

1963 - 1972 Ford F-100, F-150, F-250, F-350

1969 - 1975 International Trucks Full Size Pickup

1996 - 2000 Isuzu Hombre

1983 - 1996 Mitsubishi Pickup

1979 - 1995 Toyota Pickup

2004 - 2013 GMC Sierra 1500 - 5-1/2 Foot Bed

2007 - 2007 GMC Sierra Classic 1500 - 5-1/2 Foot Bed

2007 - 2007 GMC Sierra New Body 1500 - 5-1/2 Foot Bed

2004 - 2013 Chevrolet Silverado 1500 - 5-1/2 Foot Bed

2007 - 2007 Chevrolet Silverado Classic 1500 - 5-1/2 Foot Bed

2007 - 2007 Chevrolet Silverado New Body 1500 - 5-1/2 Foot Bed

2009 - 2014 Dodge Ram Pickup 1500 - 5-1/2 Foot Bed - without RamBox

2002 - 2011 Dodge Ram Pickup 1500 - 6-1/2 Foot Bed

1999 - 2013 GMC Sierra 1500 - 6-1/2 Foot Bed

2007 - 2007 GMC Sierra Classic 1500 - 6-1/2 Foot Bed

2007 - 2007 GMC Sierra New Body 1500 - 6-1/2 Foot Bed

1999 - 2013 Chevrolet Silverado 1500 - 6-1/2 Foot Bed

2007 - 2007 Chevrolet Silverado Classic 1500 - 6-1/2 Foot Bed

2007 - 2007 Chevrolet Silverado New Body 1500 - 6-1/2 Foot Bed

2012 - 2014 Dodge Ram Pickup 1500 - 6-1/2 Foot Bed - without RamBox

2002 - 2014 Dodge Ram Pickup 1500 - 8 Foot Bed

1999 - 2013 GMC Sierra 1500 - 8 Foot Bed

2007 - 2007 GMC Sierra Classic 1500 - 8 Foot Bed

2007 - 2007 GMC Sierra New Body 1500 - 8 Foot Bed

1999 - 2013 Chevrolet Silverado 1500 - 8 Foot Bed

2007 - 2007 Chevrolet Silverado Classic 1500 - 8 Foot Bed

2007 - 2007 Chevrolet Silverado New Body 1500 - 8 Foot Bed

2002 - 2011 Dodge Ram Pickup 2500 and 3500 - 6-1/2 Foot Bed

2008 - 2013 GMC Sierra 2500 and 3500 - 6-1/2 Foot Bed

2007 - 2007 GMC Sierra New Body 2500 and 3500 - 6-1/2 Foot Bed

See All Vehicle Fits



Video of Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Rhino Rack Ladder Racks - Truck Cap Ladder Rack - Y02-480B

Today we'll be taking a look at the Rhino-Rack Track Mount Roof Rack System with Vortex Aero Crossbars.This kit is going to come with everything you need to get a crossbar on top of your camper shell or your cap topper on your truck. It's going to be a very useful versatile system.We'll have our two sliding tracks to mount the bars to. These allow you to adjust the width of your bars apart and have some adjustability there. Once these are mounted up these look like factory installed tracks. They're really, really slick. You can see we'll have a nice beveled edge on the outside so it tapers down.

Each one ends in a little rubber cap to finish off the look there. This end, with this cutout in that track, you want to face toward the rear of your vehicle. The other end just ends there, so if you need to you can cut this to length to fit with your vehicle.This measures 63 inches long. That's going from the end of the track, not counting the feet on either end. If we got to the very end of the feet as well, it's about 67 inches long.

You want to make sure you have really about 70 inches or about five feet 10 inches of space on top of your camper shell. It needs to be relatively flat. You don't want to be putting this on something that really ramps up, but if yours is a little bit shorter than that you can cut this front end off to length. You want to make sure though that it's a nice clean flush cut so that those caps fit on properly.There are different lengths of track available if you want to pick up a different kit. Either one that has a 55 inch track length.

Some of them will mount a little bit differently but we do have a lot of options here at eTrailer.com for those tracks.The thing that's nice about this particular part number though, is that everything comes as a kit. We'll have our track, and the bars included, and all that hardware to get everything installed.The bolts here slide into the bottom of our tracks. That's where they'll actually go through our camper shell and they'll get tightened down with these large handle nuts. There's a little locking nut on the inside there to keep it nice, and tight, and secure. Some rubber O-rings to give us a little bit of water resistance and some more sealing rubber stickers or rubber pieces here, again to seal out any water.

Make sure that we don't have any issues with seeping water getting into our camper shell. There's also some adhesive on either side of that track as well. It's pretty well protected. People seem to really like these. They hold up well for a long time.The thing, of course, with these is that you do have to drill into that camper shell. To get this installed you have to drill a few holes. You want to make sure that you measure everything out really well. Take your time with it and be careful whenever you're drilling into that fiberglass camper shell. Just use some patience so you make sure that you don't crack it or measure wrong and get things off.That's probably going to be the hardest part of this install but other than that it's pretty straight forward. Once you have all those mounting holes measured out, drilled out, drop the hardware through, tighten everything up then it's just a matter of attaching the roof rack. The bars will drop into the feet. Whenever you're not using the system you can take these cross bars off. Then you just have your tracks sitting like this with the little caps on top so it keeps everything sealed up, but then we'll have our quick mount feet. We'll have our two red tabs there. If you push those in and up. It's a little hard for me to do showing it to the side here. That will bring those two tabs in and then that just drops down onto the bar. Then the feet snap in. It makes it a really quick system to use to get everything attached.These feet can slide anywhere along the track so if you want to have it wider for any larger items like lumber, kayaks, canoes, things like that, or narrower if you're using a bike rack, or any other kind of roof mount accessory. You can really dial it in to whatever specifications you need.The bars measure 54 inches long. Again that's going from the end of the bar itself. We'll have our cap on either end. As far as the mounting position, the widest that we can possibly have this from center to center of those feet is right at that 54 mark. That's how far apart they are. It's going to depend on your camper shell and how far it needs to be apart from there. It can, of course, come in. That's just how long the bar is going to be. The narrowest that we can make those bars, roughly, would be about 32 inches. Going from a little bit in from the narrowest point there where we can mount that foot up. Again, it just gives you a lot of options.This is going to fit a lot of different vehicles. To be sure if this is a fit for you, we do have a fit guide here at eTrailer.com. You can put in your year, make, and model, and check that out there.The other thing I like about this kit is that it does come with the keys to get our caps on and off so no one can remove our bars and mess with those. Once the bars are in place the cover up the hardware for the tracks so no one can get in and adjust those. To move these along the track, have a little hex key. It does have a punch in the middle to make it a little bit more tamper proof but once it's loose, slide it right along wherever you need it to be, tighten it back down and it'll hold everything in place.I think this kit is really nice. It's all made of sturdy material. Rhino-Rack is a really good brand. They stand right along there with Thule and Yakima. I think their stuff holds up really well. This is going to be a less expensive version than what you would get typically from Thule or Yakima but I think it really is just as good quality material. The bars are made of an anodized aluminum so they'll have a lot of good strength but still pretty lightweight so it's not too hard to get them mounted up. The tracks are made of stainless steel. We don't have to worry about any corrosion with either one of our components. Everything fits together really nicely. Again, just as long as you're patient and take your time with drilling those holes out it's not too bad of an install.This'll give you a lot more room inside your truck so if you want to have the inside of your truck bed to use as a camping area. Have one of those mattresses inside your truck bed, use that or just load up your gear. Load up your friends, your pets, whatever. Then have everything else loaded up on top. It's just going to make the most out of the space for your truck and give you a lot of options for those camping trips. If you're bringing a lot of friends, bringing a lot of stuff, you'll be able to get the most out of your vehicle.The weight capacity for this is 220 pounds. Again our track length is 63 inches per side. The crossbar is 54 inches per side. Then that's measuring three and a half inches wide, an inch and a half tall. Once we have our bar mounted on top, going from the middle of that mounting point to the top of the bar, it's about three and a half inches. Then from the bottom of the bar to where it would mount in, it's about one and a half. That's about five inches of height, roughly, that you'd be adding to the top of that camper shell. Just so you want to know how much space you're going to be adding to the top of your vehicle.The bolt length that's going to go through is an inch and 3/8, but I'd say you really want to make sure that your camper shell is no more than an inch thick because that's about the minimum that you can get this through the bar and then actually get these nuts to start on there. I have seen some customers say that this bolt ended up being a little bit too short for them and they had to switch this out for something a little bit flatter, since that nut sits down in the cap about 1/4 of an inch. You really only have, at most, an inch of space to get that threaded on there so that's something to keep in mind.This does come with a limited lifetime warranty from Rhino-Rack. Again, as I've said, I've used Rhino-Rack stuff for years here at eTrailer.com and I really like what they have to lay out. Another accessory that you might consider getting with this would be one of Rhino-Racks cargo baskets. The RMBC and RMBC02, they're both really nice cargo baskets to load up on top of your roof bars. The thing I like about them is that the supports go lengthwise so it makes it easier to get those feet adjusted on there and adjusted out. Of course since you have the sliding bars it makes it easy too but their stuff just lasts for a long time and I think it's really good quality product.That's going to do it for our look at the Rhino-Rack Track Mounted Roof Rack System.


Customer Reviews

Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long - Y02-480B

Average Customer Rating:  5.0 out of 5 stars   (6 Customer Reviews)

Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.

- Y02-480B
by:

THE GENIUS OF A PERFECT SOLUTION It is not very often that a purchase for something as mundane as a utility device stirs such awe inspired appreciation and praise. I have just completed the installation of the RLCP Rhino Heavy Duty Canopy/Hard Tonneau Track Mount atop my A.R.E. Camper Shell. I am amazed at the attention to detail of each and every part which has been carefully engineered and perfectly manufactured. I am truly impressed by the genius of a perfect solution to my roof top cargo handling needs! From the mating surfaces of the injection molded towers and the lightweight, but durable extruded anodized aluminum crossbars, to the gentle contour of the rail stock to the camper rooftop, every single part has form, fit and function! The finished product is beautiful, durable, convenient, and for the money invested, economical. I give Five Stars of Praise to the Aussie friends at Rhino-Rack Australia Pty, Ltd. Equally praiseworthy is the superb performance of e-trailers, Inc. These folks distinguish themselves from the competition through their superior attributes of website presentation, pricing, order fulfillment and package integrity. This is a unique distribution partnership which is imbued with the highest standards of e-commerce. Job well done, everyone! 528546


Comments

Perfection in every sense of the word!

Scott H - 06/30/2019

57284

- Y02-480B
by:

My product arrived promptly and in good order. I appreciate the clear written instructions provided by etrailer. More importantly, I plan to follow the step-by-step instructional video that etrailer has posted on YouTube. I have confidence that the install will go smoothly with such great support! 664360



- Y02-480B
by:
2010 Nissan Xterra

Very impressed with this system: quality materials, nicely-designed parts that work well together, straightforward installation & assembly, plus it includes o-rings for the bolts & butyl patches to surround the drilled holes, so waterproofing has already been addressed (no need to add your own silicone or otherwise). Once the holes are drilled in the topper, the rack goes together quickly & easily. Would definitely recommend for anyone looking to add tracks & crossbars to their fiberglass cap/topper. 639013



- Y02-480B
by:

Great rack. I have never regretted the purchase. I would definitely recommend. 593440



- Y02-480B
by:
2015 Ram 2500

excellent quality product and great fast shipping and packaging. 593060



- Y02-480B
by:

The rail kit for fiberglass truck caps arrived promptly and was as described on the website. Reasonably easy to install and easily as good as Thule and Yakima racks for half the money. My only minor quibble is a couple of small scratches on a crossbar. However, since it's sure to get scratches from normal use is not a big deal. It'll be used to mount an awning and extra gear for group camping trips. 485649


7
7

Ask the Experts about this Rhino Rack Ladder Racks

Do you have a question about this Ladder Rack?


  • Truck Camper/Topper Roof Rack System for a 2011 Ford F150 Crew Cab with 5-1/2 Foot Bed
  • Rhino Rack produces a full range of track kits that will work on your truck topper. You simply need to choose the length and color for the vehicle. All of these kits include a set of Rhino-Rack Vortex Aero crossbars that have c-channel mounts and are quick-slide to move forward and backwards along the rack as you need it. They are all inclusive and don't require additional parts. 54 inches long, Silver, part # Y02-480 or Black, part # Y02-480B 59 inches long, Silver, part # Y02-490...
    view full answer...

  • Availability of Shorter Track Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars # Y02-500B-ST
  • The tracks of the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars # Y02-500B-ST could be cut shorter if you wanted to but also there is a shorter version of this available too as part # Y02-480B which has 54 inch long tracks instead.
    view full answer...

  • Recommended Rhino-Rack Complete Roof Rack System for Snug Top Truck Camper Shell Bed Cap
  • Rhino-Rack does have a complete kit with shorter crossbars that still have the tracks for your truck cap. It is the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long # Y02-480B. If you want shorter bars than that, there is not a kit but you can create the same thing with individual parts. You can use the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2 # RTC16, the legs # RRRLT600, and then add the bar length you desire. You...
    view full answer...

  • Rhino Track Mount Roof Rack for 5' Long Cap on a 2006 Dodge Ram 1500 6-1/2' Bed
  • The Rhino-Rack Roof Rack System # Y02-480B is a confirmed fit for your 2006 Dodge Ram 1500 6-1/2' bed as well as the 8' 1500. The reason it fits both is because the track itself can be cut to length for your specific application. You just need to make sure that the cut is perfectly straight so that it is easier to use the track and the caps fit. If you would rather not cut the track you can just make your own kit with the 54" Vortex Aero Crossbars # RRVA137B-2. the Quick Mount Legs #...
    view full answer...

  • Is a Rhino Rack System With 54 Inch Bars Available?
  • The kit you are looking for is the Rhino-Rack Roof Rack System # Y02-480B. This rack has the 54 inch crossbars you were seeking, and is otherwise exactly the same as the kit with 59 inch crossbars you referenced, # Y02-490B. This system does have locks to secure it to your 2014 Chevy Silverado. I've added a link to a video installation of this rack for you to take a look at.
    view full answer...

  • How To Carry Kayaks On a Camper Shell
  • The best option I have for you to carry your kayaks on the camper shell is with the Rhino-Rack Roof Rack System part # Y02-480B which uses tracks so you can slide the crossbars back and forth at will. In regards to installation, you will have to drill into the camper and there will be visible components inside but there is no way around this when installing a roof rack on a camper shell. I have attached the installation instructions for you as well so you can see for yourself. I spoke...
    view full answer...

  • Can Tracks of Rhino-Rack # Y02-490B Be Cut To Desired Length?
  • The Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long # Y02-480B can in theory be used on your 2010 Jeep JKU Wrangler hard top but it is not a confirmed fit. The tracks can be cut to your desired length. Because this system is not a confirmed fit, the rated capacity will most likely be more similar to the 99 lbs of the similar Rhino-Rack Track fit confirmed for your vehicle. That rack consists of # RB1500B-2, # RRRLT600, # RTC12JWMY11,and # RRQMHD05-2...
    view full answer...

  • Length of Tracks that Come with the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars Y02-480B
  • 63 inch long tracks are included with the Rhino Rack Roof Rack part # Y02-480B that you referenced. The crossbars are 54 inches long.
    view full answer...

  • Is Rhino-Rack Track-Mount Vortex Aero Roof Rack Y02-480B a Complete Roof Rack System
  • Yes, the Rhino-Rack part # Y02-480B is a complete adjustable track-mount roof rack system that includes a pair of tracks, four leg assemblies, two aero-style crossbars and locks. This is intended primarily for applications on camper shells, hard tonneau covers, or hardtop resin roofs as found on some RVs. This rack setup could also be installed on the roof of a vehicle such as your 2012 Chevrolet Silverado but we have other custom roof rack options that will not require drilling into...
    view full answer...

  • Recommended Sliding Rhino-Rack Roof Rack for Leer Cap on a 2016 Toyota Tacoma
  • The 59" rails that come with the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars # Y02-490B that you referenced can be cut to length according to your needs with your 2016 Toyota Tacoma. However, I do recommend going with the part # Y02-480B instead which is the exact same kit just with 54" long rails instead. I went out to the warehouse and found that the rubber pieces at the ends of the rails measure about 2-1/2" so even though the usable part of the rails measures 54" they...
    view full answer...

  • Recommended Roof Rack Track System for a Fiberglass Truck Topper on a 2019 Toyota Tundra
  • The adjustable roof rack systems are a very popular option for fiberglass truck toppers. They will allow for you to carry a variety of different items such as a cargo box, kayak carrier, or in your case a cargo tray. The best system we have for this is the Rhino-Rack Roof Rack Track System part # Y02-480B. This kit includes a set of tracks, two crossbars, two mounting feet, and everything else you will need to install the system on your truck topper. The reason I recommend this system...
    view full answer...

  • Recommended Adjustable Roof Rack For 2007 Chevrolet Silverado With Camper
  • The adjustable ladder racks we offer for your 2007 Chevrolet Silverado Classic require mounting the tracks to the roof of your cap on the bed of your truck. I recommend part # Y01-120B. This system features the 54 inch heavy-duty square crossbars, and has a C-Channel designed for mounting Rhino-Rack accessories and carriers. This roof rack also has a 220 lb weight capacity.This roof rack also features 63 inch tracks that are attached to the camper shell, or hardtop resin roofs with no...
    view full answer...

  • Recommended Roof Rack for Leer Fiberglass Topper
  • I do have an option for you but the Thule Tracker II System has been discontinued and although there are still a few replacement parts floating around, you will have a very difficult time finding everything you need to reuse your old mounting feet and crossbars. Therefore, I know this might not be want you are wanting but your best option is to just replace the entire system. For replacement, we actually have complete all in one systems that make things super easy. I recommend the Rhino-Rack...
    view full answer...

  • Best Roof Rack for 2013 Honda Ridgeline
  • While there is not a specific fit for a rack system on your 2013 Honda Ridgeline you can still mount one but you will need to cut the tracks. The reason for this is the tracks are all 63 inches long, which is longer than the bed of your truck. You will only need to know the distance across your cap to get the correct length of crossbar. For example, there is the Rhino-Rack Roof Rack System # Y02-480B which has 54 inch long crossbars or the # Y02-490B which has 59 inch bars. A better...
    view full answer...


Do you have a question about this Ladder Rack?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality ladder racks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ladder rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Tyler C
Updated by:
DeAnne T
Updated by:
Lisa S
Updated by:
Daron K
Updated by:
Alex H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Kathleen M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.