1. Ladder Racks
  2. MaxxTow
  3. Truck Bed
  4. Fixed Rack
  5. Steel
  6. No-Drill Application
MaxxTow MaxxHaul Over-The-Cab Truck Bed Ladder Rack - Steel - 800 lbs

MaxxTow MaxxHaul Over-The-Cab Truck Bed Ladder Rack - Steel - 800 lbs

Item # MT70232
lowest price pledge
Our Price: $530.80
Ladder Racks

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 165 lbs
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos


Need help with installation?
Locate installers near me
This steel ladder rack with an over-the-cab extension lets you haul ladders, pipes, lumber, and other long cargo on your truck. Side rails provide extra load support and multiple tie-down points. Easy, clamp-on installation. Fits most truck beds. Fastest Shipping and Guaranteed Lowest Prices for MaxxTow MaxxHaul Over-The-Cab Truck Bed Ladder Rack - Steel - 800 lbs. Read our customer reviews of MaxxTow ladder racks. Call 800-298-1624 for expert service or order your ladder racks part number MT70232 by MaxxTow online at etrailer.com.
  • All Info
  • Reviews (223)
  • Q & A (36)
  • Photos
  • Why etrailer?

MaxxTow Ladder Racks - MT70232

  • Truck Bed
  • Fixed Rack
  • MaxxTow
  • Steel
  • No-Drill Application
  • Fixed Height
  • Over the Cab
  • Heavy Duty
  • 4 Bar

This steel ladder rack with an over-the-cab extension lets you haul ladders, pipes, lumber, and other long cargo on your truck. Side rails provide extra load support and multiple tie-down points. Easy, clamp-on installation. Fits most truck beds.


  • Extended-length truck bed ladder rack lets you haul ladders, lumber, and more with ease
  • Over-the-cab extension allows you to carry longer loads
    • Front crossbar adjusts to accommodate different size cargo
  • Side rails provide multiple tie-down points and extra load support
  • Convenient tie-down cleat on each upright provides additional place to anchor your cargo
  • Curved grab-handles on rear of rack provide extra leverage for loading cargo
  • Aerodynamic design reduces drag and wind noise
  • Easy installation with clamps - no drilling required
    • Bed rail clamps are pre-drilled for optional permanent installation - hardware not included
  • Universal system adjusts to fit most truck bed widths
  • Sturdy steel construction
  • Black powder coat finish resists corrosion, chips, and scratches
  • Corrosion-resistant, yellow-chromate-plated hardware
  • Compatible with bed liners


  • Weight capacity: 800 lbs
  • Dimensions: 138" long x 60" wide x 34" tall
  • 90-Day limited warranty

Note: Will not work with tonneau covers or crossover toolboxes.

Over-The-Cab Ladder Rack

This MaxxTow ladder rack extends over the roof of your truck to maximize your carrying capacity. It has integrated side rails for load support and for tying down your gear. The extra coverage allows you to carry longer loads without having to worry about overhang. And the added surface area for cargo helps to evenly distribute load weight.

Easy, Clamp-On Installation

Clamp on installation

Sturdy, user-friendly clamps let you mount this rack to your truck bed without drilling or other modifications. Simply position the bases at the corners of the truck bed and clamp them to lips of the truck bed rails. Assemble the upper portion of the rack and attach it to the uprights, then bolt the uprights to the bases. The rack can be installed on short-bed or long-bed trucks.

There are holes in each bed rail clamp that allow you to permanently bolt the rack to your truck bed. Permanent installation will require drilling. Hardware not included.

If you are installing the rack on a truck bed without a bed liner, the bolts for the mounting clamps may cause interference when installing a toolbox. To install a toolbox on a truck bed without a bed liner, trimming of the clamp bolts may be necessary for the toolbox to sit flush on your truck's bed rails.

Load Support and Security

The ladder rack has integrated side rails that provide load support and multiple tie-down points for securing your cargo. A moveable crossbar in the over-the-cab extension helps provide extra support for the front end of a load. There is a convenient tie-down cleat on each of the rack's 4 vertical uprights to provide additional anchoring points for your truck's load. There is also a handle on each side of the rack at the rear to provide additional leverage and support for easier loading and for accessing that hard-to-reach cargo.

Sturdy Steel Construction

Steel construction

Steel is highly durable, maintains structural integrity, and does not age or decay as quickly as other materials. A black powder coat finish has been added to help resist corrosion, chips, and scratches, and to keep the rack looking new. The nuts and bolts have a yellow chromate plating that helps prevent corrosion.

70232 Maxx Tow Maxx Haul Universal Contractor Pickup Truck Bed Rack - Steel - 800 lbs

This Product Fits The Following Vehicles

Customer Reviews

MaxxTow MaxxHaul Over-The-Cab Truck Bed Ladder Rack - Steel - 800 lbs - MT70232

Average Customer Rating:  4.6 out of 5 stars   (223 Customer Reviews)

This steel ladder rack with an over-the-cab extension lets you haul ladders, pipes, lumber, and other long cargo on your truck. Side rails provide extra load support and multiple tie-down points. Easy, clamp-on installation. Fits most truck beds.

- MT70232

Non-trivial assembly and a bit fidgety on initial adjustment (lots of "oh, gee, this is too far to the left"-type adjustments), but once it's in place it's a great rack that works well. Don't expect that you'll be removing it once it's on, though--those adjustments are a killer.

- MT70232
2004 Toyota Tacoma

I love this rack. It was shipped timely in two boxes. Once I put it on I was able to load up 16' 2x12 and a big canoe on my little 2004 Tacoma. I had multiple compliments and even had someone offer to buy my truck. Game changer!

- MT70232
2020 Chevrolet Silverado 1500

The rack is of decent quality. The instruction manual was poorly printed and hard to read and the pictures were just about worthless. I tried to find other instructions online but could not find any. Shipping was very fast but the packaging was not that good and one of the boxes was ripped open. Luckily there wasn't anything missing. I think the instructions could be better.

- MT70232
2016 Nissan Frontier

Got this for my nissan frontier 2016 sv 4x4 5ft bed and it fits perfect really easy to install me and another person I was very iffy about this rack but changed my mind when it was finished I will be using it for construction and camping woth my family satisfied with the product and price thank you for the sevice.

- MT70232

The rack is decent and holds a bit of weight. My downside was it didn't work with my over the rail bed box. Had to purchase a tuck box. The clamps stick up kind of high. Biggest downfall was it started to rust 6 months later to the point when it rained, rust streak ran down the bed. So I sold it.

- MT70232

The ladder rack is amazing and was rather simple to assemble. The only issue I had was the nuts, bolts and washers were not labeled the same as in the instructions but over all very very satisfied. Delivery was very quick as well

- MT70232

Horrible Instructions!! I finished building the rack and attached to my truck, seems very secure. But the instructions are worthless, pictures are useless, and all the nuts bolts and washers (over 140) are labeled differently than in the instructions. Make sure you have some very large sockets and wrenches, and don't plan on NOT scratching it up during the building process.

- MT70232
2017 Toyota Tacoma

Good rack, I installed on a 2017 Tacoma used the holes Toyota provided on inside of bed instead of drilling thru the bed top. Makes for a very clean install. Would suggest drilling thru slip joints on top if long loads anticipated, as I did experience slipping carrying 16 foot decking. Finish has dulled a lot although truck parks outside. Would buy again, good deal. I saw the same one at harbor freight, same price.

- MT70232
2007 Dodge Ram Pickup

Was like putting a wet noodle together. Had to put it together by myself. It said to put it together on the ground and then lift it on to the truck. It would of never fit doing it that way from my experience. Some of the holes for the bolts didn't line up very good. The end cap I had to redrill completely. After I finally got it put together it seemed fairly sturdy. I don't like the fact that you can't take the end rail off without undoing a bunch of bolts. Won't be hauling anything tall in the truck bed. To short for a long bed truck. Can't haul any 16 foot lumber with out it hanging off both ends. Over priced for what you get. Just saying.

- MT70232

I use this in business to carry multiple ladders. Takes daily abuse with no issue. I bolted it on. Cut off the J-hook tubes as they were in the way of my side boxes (easy with sawsall). Product suggestion -- add an extra (movable) cross bar over bed. I have to be very careful with my shorter ladders, so they do not fall into bed. An extra bar (even if up-charge) would be great.

- MT70232

This rack is mainly used for picking up lumber and sheet rock. The installation is straight forward, you do need at least 1 other person to set it in place. I have had several people ask me about it and have told them to check out your web site. So far it has met my expectations.

- MT70232
2014 Nissan Frontier

The material is strong it was in my opinion somewhat complicated mainly due to the poor instruction booklet. however there were some good things about the set up such as having each packet labeled so that I could access each segment easier. The box that it came in was completed beat to death however all parts were inside nothing was lost. The main thing that I am upset is with the cab over segment that extends out because it did not fit the bed segment and no matter how tight that I get the brackets the front segment is still loose due to poor fit. also it sticks out forward further than I desired but that is what it is. But since I had it that far along I went ahead and installed it because the box was to poor to return things in. As far as the moving part over the cab I suppose that I will find a welder that can weld it into position for me and while it will serve the purpose I wish that I would have purchased a manufactured one and had it installed.

- MT70232

Used everyday and no issues

- MT70232
Nissan Frontier

This ladder rack was exactly what we needed. We have had it about a year now installed on a Nissan Frontier. Getting ready to add another truck to our window cleaning business and will be ordering another ladder rack for it soon.

- MT70232
GMC Sierra

Very satisfied with the strength and quality of the rack. Installed it yesterday by myself in about four hours. Hardware was nicely bagged and tagged but no instructions included in my 2 box delivery, so it took a little extra time to puzzle out the assembly. Looks good and no dings on the new GMC Sierra crew cab, short bed :)

- MT70232
2004 Ford F-150

Nice rack for the price. Seems pretty sturdy. Directions could be better

- MT70232

It came in a timely manner and works as intended, overall it seems durable.

- MT70232

Impressive quality for the low price, I overloaded it the very first time with heavy barn beams, never figured it would've made it, What a test, well after a year of rough and tough abuse it's still holding up and functions well! Unbelievable quality

- MT70232

This rack is solid. Not only did I haul ladders, but I used it for heavy wall steel tubing and iron railings, 14’ long lumber. In instructions were a bit weak and I had to disassemble one side and put it back together.

- MT70232
2008 Ford F-250 and F-350 Super Duty

Nice product. Wish it contained some form of instructions to put it together. Only took me about an hour and a half do to it being fairly self explanatory. Overall I would buy it again.

- MT70232

Heavy duty. Works great on my dodge Laramie pick up. Good value.

- MT70232

Very good pricing, immediate shipping and rack fits perfectly, is adjustable for short or long bed so we can transfer to another truck if needed. Thank you.

- MT70232

Complete in package (2 Box's), easy to follow instructions. 1/2" ratchet and 3 sockets to assemble in about 1hr. Great looking rack, works on both long and short bed trucks.

- MT70232
2018 Nissan Frontier

The rack was easy to assemble, and the instructions were well written and easy to follow. Thank you for a great product.

- MT70232

Great product. Great price. Fit the pickup perfectly. Installation took 2 hours with 2 men.

Show More Reviews

Ask the Experts about this MaxxTow Ladder Racks

Do you have a question about this Ladder Rack?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality ladder racks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ladder rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Hayden R
Test Fit:
Hayden R
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Alex H
Updated by:
Alex H
Employee Amanda M
Written by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.