View Cart
FITS 2016 Ford F-150
MaxxTow Truck Bed Ladder Rack w/ Load Stops - Aluminum - 400 lbs

MaxxTow Truck Bed Ladder Rack w/ Load Stops - Aluminum - 400 lbs

Item # MT70423

lowest price pledge

Retail:$292.50

Our Price: $208.95

You Save: $83.55
Ladder Racks
Confirmed to Fit
2016 Ford F-150

5-1/2 Foot Bed

6-1/2 Foot Bed

8 Foot Bed

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 67 lbs

Quantity: 
In Stock
MaxxTow Over the Bed Ladder Racks - MT70423
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • MaxxTow
  • Fixed Rack
  • Truck Bed Ladder Rack
  • Aluminum
  • Over the Bed
  • 2 Bar
  • No-Drill Application
  • Standard Duty
  • Fixed Height
MaxxTow ladder racks for your 2016 Ford F-150 are available from etrailer.com. Installation instructions and reviews for your Ford ladder racks. Expert service, and cheapest ladder racks price guarantee. etrailer.com carries a complete line of MaxxTow products. Order your MaxxTow Truck Bed Ladder Rack w/ Load Stops - Aluminum - 400 lbs part number MT70423 online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (74)
  • Q & A (68)
  • Videos (5)
  • Photos
  • Used (2)
  • Why etrailer?

2016 Ford F-150 - MaxxTow Truck Bed Ladder Rack w/ Load Stops - Aluminum - 400 lbs

This sturdy, lightweight aluminum rack clamps securely onto your truck bed side rails and lets you carry ladders, lumber, supplies, and equipment. Adjustable load stops included.


Features:

  • Economical, lightweight rack lets you carry ladders, lumber, and more with ease
    • Crossbars adjust to fit most truck bed widths
  • Aerodynamic crossbar design reduces drag and noise
    • Elliptical crossbars are streamlined to minimize wind resistance
  • Included load stops keep ladders, lumber, and other cargo in place
    • Slide within slots to adjust for differently sized loads
    • Twist to lock into place
  • Extruded aluminum with internal reinforcement for increased strength and rigidity
  • Durable, rustproof powder coat finish
  • Quick, easy clamp-on installation - no drilling required
    • Padded clamps will not damage your truck's rails


Specs:

  • Capacity: 400 lbs
  • Crossbar dimensions: up to 70" long x 3-3/8" wide x 1-5/8" tall
  • Upright bar height: 26"
  • 90-Day warranty


Crossbar Specs

Notes: This rack cannot be used with tonneau covers. If the truck has an over-the-rail liner or OEM sliding tie-down anchor tracks, modifications will need to be made.


This truck bed ladder rack offers 400 lbs of raised, cargo-hauling capacity. This workhorse ladder rack hauls ladders, lumber, pipe, and rebar, freeing up your truck bed for other equipment.


Telescoping Crossbars for Universal Fit

The telescoping crossbars can be adjusted to fit almost any truck bed width. When you find the width that works for your application, just tighten the set screw on the crossbar.


The aerodynamic design of the crossbars creates less wind drag and helps to promote fuel efficiency. The included load stops can be loosened and changed to the desired position by sliding them along a channel. Then simply retighten them to lock them into position.


Sturdy, Rustproof Construction

The MaxxTow rack system is constructed of durable, lightweight aluminum with a powder coat finish.


Because aluminum is lighter than steel - the material most often used for truck racks - only a small percentage of your truck's cargo capacity is taken up by the rack itself, enabling you to pack on more weight than you could with a steel system.


Simple, Clamp-On Installation

This ladder rack installs quickly and easily on your truck bed side rails. Simply position the bases of the rack where indicated in the included instructions and secure them with the provided clamps. The clamps are padded to protect your truck's side rails from scratches and scuffs.



70423 Maxx Tow Aluminum Truck Bed Ladder Rack





Video of MaxxTow Truck Bed Ladder Rack w/ Load Stops - Aluminum - 400 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for MaxxTow Truck Bed Ladder Rack Review

Today, we'll be taking a look at the Maxxtow truck bed ladder rack, part number MT70423. This sturdy, lightweight, aluminum ladder rack lets you easily carry elongated items such as ladders, lumber, or any other equipment and supplies up over the bed of your pickup. It's going to help free up space in your bed for more gear. The adjustable load stops lets you easily secure loads of varying sizes. The aerodynamic crossbar design reduces drag and wind noise. It has a durable, rust-proof, powder-coat finish, so it's going to stand up to the elements. It's a quick and easy clamp-on installation with no drilling required.

We'll go ahead and show you that now. Both halves install the same. As you can see, I've already got the front one installed on the truck right now. Let's go ahead and set this one in place. The only difference is is that mounts are going to face inward opposite the front ones.

The rack is adjustable for multiple truck bed sizes. I've already used my included tool to adjust it to fit for this truck. When putting your brackets in place, you want to make sure that there's no interference underneath the rail here. If you have a bed liner, you may need to notch 00:01:07 it out. The brackets are going to come like this with a bolt already on. You've got a lock washer and just a regular washer.

We'll go ahead and take that bolt out. You've got a padded end here and a flat end. The padded end is going to go up underneath the rail. We can go ahead and put that in position. Just slide it up underneath. You can use whatever hole you want.

You just want to use whatever works best for your application. I'm going to use my center hole here. Put my bolt through the top and hand tighten it down. I'll put my other one in position as well. Once again, you just want to make sure that the pad goes up underneath the rail of the truck. Now I can grab my 5/8" socket and tighten it down. The other side installs the exact same way, so we can just repeat that same step. Now, with it installed, let's go ahead and load up a ladder. Now we can go ahead and center it up if you'd like. Then we'll bring our adjustable load stops in, turn that clockwise to tighten them up. Now we can go ahead and secure it with our favorite strap. Now, straps aren't included, so you will need to provide your own. We've got plenty here at etrailer.com, so go ahead and pick some up. Now, with it all secure, let's go ahead and take it on our test course and see how it performed. Here, on our test course, let's first go into our slalom. This is going to show side to side action, such as going around corners or evasive maneuvering. Then, onto our alternating speed bumps. This is going to show a twisting action such as going over potholes or uneven pavement. Then, finally, onto our slalom speed bumps. This is going to show an up and down action, such as pulling in and out of a driveway or out of a parking lot. That's going to complete our look at the Maxxtow truck bed ladder rack, part number MT70423.


Customer Reviews

MaxxTow Truck Bed Ladder Rack w/ Load Stops - Aluminum - 400 lbs - MT70423

Average Customer Rating:  4.4 out of 5 stars   (74 Customer Reviews)

This sturdy, lightweight aluminum rack clamps securely onto your truck bed side rails and lets you carry ladders, lumber, supplies, and equipment. Adjustable load stops included.

- MT70423
by:
2014 Dodge Ram Pickup

Fits great on my 2014 Ram 1500 quad cab 6.4 bed very easy to install and comes apart very easy when not in use , It can of hums a little bit when on highway when driving ..Over all I like this ladder rack and for the price it's a great buy . 639002



- MT70423
by:
2015 Ford F-250 Super Duty

Great price and very well built, simple to put together and extremely rugged. we'll buy from this company in the future. Thanks for everything! 641132



- MT70423
by:
1995 Chevrolet Silverado

Received the product in good condition and on time without any missing parts. I glued in the end caps as suggested by another customer and there is no noise at 60+ mph. I'll replace the mounting bolts w/ tamper proof ones as was suggested by others. I had no problem installing it on my 1995 Silverado and have used it to carry my 18'-6" canoe. This is a rugged unit at a great price and I like the fact that I can quickly remove/install it on my truck. 643415



- MT70423
by:

Purchased it to carry kayak's with. It's been a year and would recommend to any of my friends. 463892



- MT70423
by:

The rack looks good on my truck and is good quality but one of the cross rails has a slight bow that I notice every time I look at it (3/16"). Assembly was difficult only because the screws supplied are an 1/8 inch too short, with washer and lock washer they barely reac0h the nut inside the track rail. 472781



- MT70423
by:
2001 Chevrolet Silverado 2500

This is a rack I would like to give 5 stars because it is sturdy and I like the mounts. But, it says the crossbar is 70 inches but the bottom posts only stretch to 67 inches. So if you have a full size truck like my 2001 Dodge 2500 you will have to modify this rack. So after an hour of grinding cutting and drilling so the upright posts would stretch to the edges on the top posts I got it to fit. If the top posts were 73 inches wide the bottom could go to 70 inches. Kind of miss leading but a good product other than that. etrailer also had the best price and always good customer service. 399414



- MT70423
by:
2001 Toyota Tacoma

Great item and great price. Definitely more bang for your buck! Wish there was more pictures on the instruction manual. Like most people Im excited to use the stuff i buy, and I also had limited time to install it before I really needed it. I'm pretty good at putting stuff together so looking at the main picture I was able to put it together with minimal trial and errors. My only complaint is that I wish the material for the padding was of better quality (I changed mine with industrial padding) and metal holding the bolt of the bracket was stronger (mine started to bend). With this quality issues it still didn't stop me in giving 5 stars. 254944



- MT70423
by:
2014 Ford Edge

Installed rack in bed of 2014 F150 5.5 foot bed. Took about 1.5 - 2 hours to install. Rack seems very sturdy/strong if you tighten every bolt well. Allen/hex wrench provided lost its edge mid way through installation and was useless, luckily I had a good quality Allen/hex wrench to finish the job. I would recommend this rack. 215767



- MT70423
by:
2014 Ram 1500

This rack looks great, was easy to install, and fit perfectly. I haul kayaks on it and it is solid at interstate speeds. The only downside is it makes wind noise at speed, a whistling sound, though with a little experimentation I'm sure this can be cured. All in all a very nice unit. 317863



- MT70423
by:
1997 Ford Ranger

Good product and fast shipping. Problem was a missing bolt that took over 1 month to get. Horrible customer service. Will look elsewhere when I look to buy 419404



- MT70423
by:

The MaxxTow MT70423 truck bed ladder rack is exactly what I needed to carry my 2 kayaks while pulling my Casita trailer. It has worked perfectly with no negative issues. I did use J&B Weld to glue the end caps to prevent them from coming off and causing noise, as some reviews warned. I am extremely satisfied with the workmanship, and especially the price. Comparable racks available cost much more. 443764



- MT70423
by:
1997 Ford F-250 and F-350 Heavy Duty

The rack looks nice but time will tell. The instructions that came with rack is horrible. This is not a heavy duty steel lumber rack but it should work to carry some kayaks. 404195


Comments

After 1 year of use its still holding up great. I use it mainly to carry kayak and small Jon boat on my f250.

John A - 07/11/2018

40817

- MT70423
by:
2001 Ford Ranger

The unit was ALMOST a very good product. The 90 degree crossbar supports weren't manufactured at 90 degrees, thus causing me to use washers as shims to attain the appropriate 90 degree attach point. Also, the material stops on the crossbar are thin-walled aluminum square stock. When tightening them by hand, they twisted. I hope the heavy duty system material supports I've asked for are a better quality. Customer support has been OUTSTANDING! 397691



- MT70423
by:
2015 Nissan Frontier

Have it for a year now and is great. Only the base is starting to get some minor rust, nothing a little of TLC can fix. 529041



- MT70423
by:
2015 Ram 1500

Very happy with this sturdy rack to carry my kayaks while towing a travel trailer. A small park was missing when received, but the folks at etrailer handled the problem and shipped the missing part. Have bought several times from etrailer and will continue to use them. 267789



- MT70423
by:
2016 Chevrolet Colorado

This rack is exactly as described. I chose this one for price and have not compared it to other brands that start at $100 more than this one, I would assume that they are better and lighter, but the cheaper one suites my needs. It's a little heavy, 60lbs, but it's really sturdy mounted to the truck and everything aligned perfectly with my 2016 Colorado. There were no installation instructions, but it was pretty easy to assemble and install. It took about 90 minutes. The only complaints I have is that it whistles at speeds above 40mph. I'm assuming that's because there is no rubber inserts for the T conduit on the top and bottom of the rails. MaxxTow does not have a website, and when I called the number provided by etrailer, it went straight to VM and no one has called me back. 3 stars due to the lack of MaxxTow customer service, not the actual product. I purchased a set of Rola Load Stops #59794 and they did not fit in the T Channel on this rack. etrailer was great about returning them and I have ordered some different tie down loops #59795 that I hope will fit. For the record, etrailer support was and has always been fantastic. Would I buy it again? Based on the cost and my typical use / needs, Yes. If I was going to leave in the truck permanently, probably not. I'd likely spend a little more. 506391



- MT70423
by:
2017 Ram 1500

I got the package on time as stated. The rack was very carefully packaged and it good shape. Once I read the instruction it was fairly easy to install. I do have a bed liner but no mods were needed. When it was all put together it took less than a hour. I took it for test down the free way and there was some slight whistling. I put my 28ft extension ladder and my 6' ft ladder on and there was a lot of howling going on. That may have nothing to do with rack though I need to figure that out. Another thing that I think that needs to be improved is the instructional photos were hard to read since it was B&W and small. Overall it is a good looking rack and would by from this company again! 336232


Comments

Well the ladder track had been doing good I had one issue about 6 months ago 1 of the ladder guides on top broke off while I was driving and my ladder fell off and dented my new truck that was not good, so now every day I have to check to make sure the guides are still in good shape and secure before I leave for the day.

Eric C - 01/28/2018

33865

- MT70423
by:
2012 Chevrolet Colorado

Great product but why don't us have parts for this. The load stops fall off and you don't have replacements. What a joke either make them that they don't come off or supply the parts. 501940


Comments

We cannot obtain replacement load stops from MaxxTow, but the Rola # 59794
Load Stops for Rola Haul-Your-Might Truck Bed Ladder Rack - Aluminum - Qty 4
$39.28
load stops sold in a quantity of 4 would be compatible.

-- Mike L - 04/29/2018

37861

- MT70423
by:
2008 Chevrolet Silverado

The rack looks good and is very easy to install how ever one of the angle brackets broke when installing the mounting hardware. 495686



- MT70423
by:

Ladder rack appears sturdy. It's what I expected. I'm satisfied with this product in spite of the assembly difficulties. It was a little difficult to put together. First find a 6-mm allen wrench since the one included didn't fit very well. Secondly, attaching and adjusting the crossbeam gusset was a pain. The short bolts (8x15) with the flat and lock washers barely allow enough clearance to slide into crossbeam. If the bolt unscrews out of backing plate when adjusting you have to take crossbeam gusset out of crossbeam to reattach. This happened to me when assembling and when adjusting to span my truck bed. So I had to take down the whole bar and pull apart, again. I found that first tightening and loosening the bolt to compress the lock washer helps slightly. A longer bolt would be wonderful. If I recall correctly the assembly part was left out in the review video. Now I understand why. 406648



- MT70423
by:
2011 Nissan Frontier

I received my order within a few days after I ordered it. Much quicker than I expected. It was very well packed with no shipping damage. I couldn't wait to get it installed so I got right to work. Install is fairly intuitive so there wasn't much need to review the directions. However once I figured out I needed to remove my Utili-trac rails to install the rail mounts (which wasn't covered in the directions for a Frontier) the install went quicker. The MaxxTow rack is made of decent quality materials but assembles into a solid unit. I wish it was a little more stylish to compliment the design of my Nissan but for the price-point you're getting all function. 271207



- MT70423
by:
2010 GMC Canyon

I bought this to haul my Kayaks I have a 2010 GMC Canyon and tow a Travel trailer for Camping. Racks for RV's $$$$.$$ insane! This was easy to put together and sturdy! I can take it off and put my trifold cover on when not using it and no drilling = no hole in your truck bed!!! 399242



- MT70423
by:
2018 Ford F-150

Good 400lb light duty rack. Came with broken plastic cross bar end caps. Informed E Trailer and they sent an entire cross bar in 2 days time with shipping label for the return of affected bar. Wow! Great customer service! Please note, cleats do Not come with rack, they were an add on. Will use this rack for kayak and surf fishing poles. 492700



- MT70423
by:

So far it's holding up as expected, my only complaint is the caps on the ends of the cross bar. One bar was missing them when I received it. And within a week one of the other bars must have came out as I went down the road and I removed the last one since it was about to fall out also. There's just no retention on them. Also note that they are not installed it whistles any time I drive over 20mph. 230883



- MT70423
by:
2010 Dodge Ram Pickup

This rack has exceeded my expectations and worked perfectly for my purpose. I bought it for the sole reason of being able to transport kayaks. I'm impressed by the quality of it as it's very sturdy (and it also looks great as it's made from aluminum). The fact that you don't have to drill holes in your truck also makes this a winner! Made our first successful trip yesterday, removed the rack in less than 10 minutes and...no damage to the truck rails. I can now safely haul 5 kayaks in a 5.5' RAM. Love it! 246783


Comments

Still using it and still love it. The only thing I have experienced is theblack caps have fallen out of 3 of the 4 ends of the horizontal tube so itwhistles some when driving. All in all, I am very pleased with it.Thanks for following up.

Rob - 02/10/2018

34478

- MT70423
by:

Fantastic product. I put it together by myself and it took me an hour and it fit great. I will recommend this product to others. 411008


Comments

So far so good. Have had zero problems with the rack. I use it mainly for hauling my grandkids kayaks around. Ive also used it for lumber and drywall and handled both without a problem with either one. I do recommend this product to everyone who need the extra hauling ability. Thx again for a superp product

Ronald B - 07/26/2018

41485

- MT70423
by:
2016 Ford F-150

I buy lumber once every month or two and this rack works well for my purposes since it's easy for one person to take on and off. When I need the full bed or when I use my tonneau cover, I use a power impact driver to take the bolts off in seconds and each of the two racks are pretty light so they're easy to handle. If I need to haul my dirtbike, I only need to take off the rear rack, so half the work. I can carry 12-ft boards no problem on the highway and the forklift at the lumber yard can easily load the boards right onto the rack for quick and easy loading. I live in Santa Cruz where there's a lot of theft crimes and park my truck outside, so for peace of mind I replaced all the hex bolts with M10 x 40mm "tamper proof" torx bolts that I got on eBay (see photo). 398593



- MT70423
by:
2016 Ford F-150

Just installed these on my 2016 F150. They look nice and everything went together without an issue. I was surprised that the bases were not aluminum. Not really a issue! I did go out on the highway for a noise test. 60 mph and no issues, even with the Yakima kayak carriers attached. 277291



- MT70423
by:
2014 Ram 1500

I purchased this for hauling my kayak while utilizing my bed for my mountain bikes and camping gear. The rack looks nice but the hardware is spotty probably will rust over time. Installation is not hard took me about 30mins by myself. It’s gets the job done but my biggest complaint is the WHISTLE. Man is it annoying. Honestly is I payed more than $195 I’d be upset. Should have just went with the Thule one for an extra $150. Drew 561193



- MT70423
by:
1996 Dodge Ram Pickup

I was impressed how quickly and easily the product was to assemble! Would recommend to anyone! 654384



- MT70423
by:

Just what the doctor ordered love it thank you so much and it was a steal 636574



- MT70423
by:

The brackets that are attached to the truck have already started to rust at the welding joints. 608596



- MT70423
by:

Fits great, easy install. 594237



- MT70423
by:
2012 Dodge Ram Pickup

Product arrived within 2 days. Packaged very well. Very easy to follow instructions to put together. I was looking for a rack actually use for our kayaks. All we had to do is add a few pads to the racks to cushion the racks. These racks go on and off very easy for travel and we have now traveled over a thousand miles with our kayaks on the racks. The racks hold up very well and very sturdy. Much more than I expected. And it amazes me that they were priced as well as they were. there is not one word that it could explain how satisfied we are with our purchase. A + A + A + A + extremely high recommendation. 576839



- MT70423
by:
2011 Chevrolet Silverado

The material quality looks great. The main parts of the kit were painted, or aluminum with caps to protect you and the ends from getting cut or damaged. I plan on using the rack for kayak transportation. This allows me to keep my bed-space open for other things and utilizes the length over the cab. It looks rugged enough to keep whatever I place on the rack to keep it from being blown off. My bed did not allow for proper mounting though; I had to cut holes in the existing sheet metal to accommodate the latches on the aft end. By proper I mean; the parts that mount to the truck bed in the back could not be placed far enough back to get the full-length use of the rack. 576782



- MT70423
by:
2016 Chevrolet Silverado 1500

I bought this rack for the purposes of carrying kayaks and SUPs. From box to the back of my truck took about 90 minutes. I think it will do very well as the rack is quite sturdy. The only areas for improvements are the instructions which were blurred so you really couldn't see what bolts went where, and the bolts that connect the crossmember to the support bracket could stand to be a quarter inch longer. The assembly process was pretty intuitive so the blurred instructions were not too much of an issue. I would recommend the rack. 568580



- MT70423
by:

Very well made and solid. Just what I need to carry two kayaks while pulling my trailer. 565842



- MT70423
by:

I use the rack to carry our kayaks on day trips as well as hundreds of miles, we have not had a single issue. I would recommend these racks to anyone, they are great. 528673



- MT70423
by:
2003 Toyota Tacoma

Holding up great! Works well for paddle boards and surfboards. I recommend this product. It was easy to install :) 509114



- MT70423
by:
2004 Ford Ranger

Great product, quick delivery! 502350



- MT70423
by:
2018 Ford F-150

Fast Shipping. 2 days for me here in NC. Very well built. Easy to put together and install on 2018 F150. Had to notch out the bed liner but that was stated in the product details . I used a 1in holesaw to make room for the clamps. This rack is going to tote my 12ft yaks around. I can cable lock them to the rack and strapping them will be easy. I like that the Yaks can lay flat side by side. I may put some foam under them I am not sure. Keeping the paddles up on the rack will be nice too as they have always been a pain in my @@@. I think this rack is value for the money and etrailer was great to deal with. Thank you . 485480



- MT70423
by:
1996 Ford F-150

Fit bed on my 1996 Ford F-150 perfectly. Impressed at how level the rig turned out. About 2-3 hours to install, but I am a slow perfectionist. Perfect fit for 3 side-by-side rowing sculls to the FL Keys from Deland, FL. 375 miles of interstate at 65 mph without a shudder or problem. At half the price of the "high-end" competition, a real steal. I have left in place for a year without appreciable rust or problems. Thank you for an excellent product. 484510


Comments

It is a rock. Use it primarily for transporting racing sculls, and it handles 3 side-by-side very well. Impressed at how square all hardware remains after bouncing around for two years. My F-150 and I are happy to have it.

Curt R - 03/13/2019

50497

- MT70423
by:

Seems good quality but too tall for my truck. Was looking for something cab height but this is so high I couldn't get truck into my garage. 468513



- MT70423
by:

Fast shipping, easy install , looks great . Well built . I changed the mounting bolts to Star head for security purposes. 446233


Comments

After owning it a year I had to get rid of it . The locking supports wouldnt stay on and it started bowing in the middle. I only had a 28ft ladder and a 6ft step ladder. But over all I loved it .

Kenneth - 10/26/2018

45111

- MT70423
by:
2017 Ram 2500

easy pizie 444827



- MT70423
by:

Just install my ladder rack I really like the fact that it is a bolt-on application no holes to drill. Ready to haul a ladder or two but I'm going to utilize it to haul my kayaks 409698



- MT70423
by:
2016 Dodge Ram Pickup

The width was to short for my 2016 dodge ram crewcab 2500. Had to drill new holes for the cab end, no biggie but I'm a retired electrician and have all the tools needed. Someone else might not. I love the product, its exactly what I wanted. Dodge has a parallelogram truck bed, not rectangle. 409491



- MT70423
by:

Very sturdy rack yet light and a cinch to install. Used it to haul my canoe to Alaska and back. No worries of it staying secure on the Alcan highway. 404399



- MT70423
by:
2013 Nissan Frontier

Easy install. Good product 404136



- MT70423
by:
1989 GMC C/K Series Pickup

Easy to install, durable, easy to remove 402069


56
80
Show More Reviews

Ask the Experts about this MaxxTow Ladder Racks
Do you have a question about this Ladder Rack?


  • Recommended Ladder Rack Compatible With Deck Rail System On 2017 Toyota Tacoma
  • MaxxTow Truck Bed Ladder Rack w/ Load Stops - Aluminum - 400 lbs # MT70423 will fit ONLY if you don't have the Deck Rail System. There is not an adapter kit available for this product to be used with the Deck Rail System. If you have the Deck Rail System, I recommend the Rola Haul-Your-Might T3 Truck Bed Ladder Rack - Aluminum - 800 lbs # 59799 as well as the Eye Bolt Tie-Down Kit for Rola Haul-Your-Might Truck Bed Ladder Rack - Steel - Qty 4 # 59796 or the Load Stops for Rola Haul-Your-Might...
    view full answer...

  • How to Carry a Kayak and a Canoe with a 2016 Ram 1500
  • We have a couple of different options for you to haul a kayak and canoe with your 2016 Dodge Ram. One way to haul your kayak and canoe is with a truck bed ladder rack. I recommend going with the TracRac TracONE Ladder Rack # TA27000XTB. This is rated for 800 lbs so you can use it for more than just hauling your kayak and canoe. It is made of aluminum so it is strong and rustproof but also lightweight. You will need to use pads, like the Thule Surf Pad # TH804, to load your kayaks on...
    view full answer...

  • Will the MaxxTow Truck Bed Ladder Rack # MT70423 Fit a 2017 Nissan Titan with the Utili-Track System
  • I do have a solution for you, but unfortunately the MaxxTow Truck Bed Ladder Rack # MT70423 is not compatible with a 2017 Nissan Titan that has the Utili-Track System. For a similar ladder rack I recommend going with the Rola Haul-Your-Might T3 # 59799 which is an aluminum ladder rack that has a weight capacity of 800 lbs. This system adjusts just like the MaxxTow system plus it has aero style crossbars with the T slots for the Eye Bolt Kit # 59796 or the Load Stops # 59794 to help secure...
    view full answer...

  • Kayak Carrier Solution for MaxxTow Truck Bed Ladder Rack MT70423
  • Since the MaxxTow ladder rack has T-slots on the top of it the best solution for a kayak carrier is one that attaches to the bars with those T-slots. For that we have the Inno Surfboard, SUP, Kayak, and Canoe Carrier # INXA445 which will allow you to secure the kayaks directly to them.
    view full answer...

  • Inexpensive Ladder Racks for a 2008 Nissan Frontier with Utili-Track System
  • I do have similar ladder racks for your 2008 Nissan Frontier but the MaxxTow Truck Bed Ladder Rack part # MT70423 will NOT work with the Utili-Track System. Instead, you will want to take a look at the MaxxHaul Truck Bed Ladder Rack part # MT70386 which is compatible with the Utili-Track System. This ladder rack actually has a higher weight capacity of 500 lbs compared to 400 lbs. It does however require drilling. The next most cost effective no-drill option we have for you is the Erickson...
    view full answer...

  • Ladder Rack Needed with Toolbox Mounting Points for a 2017 Toyota Tacoma with the Deck Rail System
  • I do have a solution for your 2017 Toyota Tacoma with the Deck Rail system, but unfortunately the MaxxTow Truck Bed Ladder Rack # MT70423 that you referenced is not confirmed to fit your Tacoma. For a ladder rack that will fit your Tacoma and has mounting points for a crossover-style toolbox you will need to go with the TracRac TracONE Ladder Rack. This is rated for 800 lbs and comes in Silver # TH27000XT-XK4 or Matte # TH27000XTB-XK4B. It features the same type of aero style crossbars...
    view full answer...

  • Recommended Load Stops, Eyelets, And Kayak Carrier For Maxxtow Ladder Rack On 2016 Ford F-150 5.5 Ft
  • The MaxxTow Truck Bed Ladder Rack w/ Load Stops - Aluminum - 400 lbs # MT70423 is a confirmed fit for your 2016 Ford F-150 Super Crew with 5-1/2 foot bed. You can purchase additional load stops like the Load Stops for Thule Ladder Rack and Aeroblade Load Bars - Qty 4 # 753-3761. You can also use T-bar eyelets like # TAPI-11019, but you may also want to consider using a carrier for your kayaks. We have a customer that used the Yakima EvenKeel Flexible Boat Saddles for Roof-Rack Crossbars...
    view full answer...

  • Ladder Rack that Fits 2015 Toyota Tacoma and Install Video
  • We have similar ladder racks that fit your 2015 Toyota Tacoma but the MaxxTow part # MT70423 that you referenced is not listed as a fit so we don't have a way to recommend this as a fit for your truck. Instead you'd want the Rola Haul Your Might # 59799 which is a fit. To see how it installs on a similar Tacoma check out the install video that shows it installed on a similar 2018 Tacoma.
    view full answer...

  • Roof Rack Pads that Will Fit a MaxxTow Ladder Rack to Carry Stand Up Paddleboards
  • Yes we do have some pads that will fit the crossbars on the MaxxTow ladder rack # MT70423. They are from Thule, # TH804. This pads will fit the large bars on Thule ladder racks that are nearly identical to the MaxxTow bars. Each pad is 24 inches long. I also recommend the Thule Express Surf Strap # TH531 to secure the SUPs to the ladder rack. The Express straps come in quantities of 2.
    view full answer...

  • Installation Instructions for the MaxxTow Ladder Rack part # MT70423
  • I pulled up the install instructions and attached the assembly instructions pages from them to this page for you to check out. It looks like step 5 of the attached picture is the step you are looking for.
    view full answer...

  • Will MaxxTow Truck Bed Ladder Rack with Load Stops # MT70423 Fit 2005 Toyota Tacoma
  • Yes, the MaxxTow Truck Bed Ladder Rack with Load Stops, # MT70423, has been confirmed to fit the 2005 Toyota Tacoma. This sturdy, lightweight aluminum rack clamps securely onto your truck bed side rails to allow you to carry up to 400 lbs of additional cargo.
    view full answer...

  • Can MaxxHaul Ladder Rack # MT70386 be Installed with Clamps on a 1997 Ford F-350
  • I took a look at the picture that you referenced (attached) and it looks like the customer used their own hardware since the MaxxHaul Truck Bed Ladder Rack # MT70386 only comes with hardware that you have to drill holes to use. Obviously we can't recommend using different hardware for safety reasons so if you are wanting a different rack that uses clamps then we have the Erickson # EM07706 which is rated for 800 lbs or the MaxxTow # MT70423 which is rated for 400 lbs. Both of these will...
    view full answer...

  • What T-Slot Accessories Will Fit MaxxTow Ladder Rack MT70423
  • The T-slot in the MaxxTow ladder rack # MT70423 will accept accessories from any manufacturer that uses T-slots for mounting. That includes the Thule load stops # 753-3761. If you can tell me what accessories you are interested in I can make specific recommendations.
    view full answer...

  • 2010 Nissan Frontier 5 foot Bed Ladder Rack Recommendation
  • I checked with MaxxTow and the Ladder Rack part # MT70423 that you referenced has been confirmed as a fit for your 2010 Nissan Frontier with a 5 foot bed and utili-track system. I attached a review video for you to check out as well.
    view full answer...

  • Recommended Ladder Rack to Use to Carry Kayaks
  • From what I can tell, you're referring to the photo of the blue Ford F-150 in our review section. The customer used the MaxxTow Truck Bed Ladder Rack # MT70423. The ladder rack connects to the side rails of a truck bed. That particular customer used the Yakima EvenKeel Boat Saddles # Y04052 on the work and it worked great. I can't recommend using the MaxxTow rack on a trailer since this isn't what it was made for and hasn't been tested in such a way by the manufacturer. Especially,...
    view full answer...

  • Fit of MaxxTow # MT70423 Ladder Rack on 2002 Tacoma SR5 w/ Factory Bed Liner On Bed Side Rails
  • The ladder rack clamps to the underside of the bed side rail, (see video), so if the bed liner interferes with that then you'll need to cut some holes to allow the clamp to be installed. If you view the video I've linked for you, you can better see what I'm talking about.
    view full answer...

  • Recommendation for a Light-Duty Lumber Rack On 2008 Toyota Tacoma
  • I can help answer your questions about the MaxxTow Truck Bed Ladder Rack # MT70423. This aluminum rack is in fact a no drill application, so you will not have to do any modifying to your truck for its installation. This rack also has an aerodynamic crossbar design to reduce drag and wind noise. I would recommend this rack for your occasional haul, because of the aerodynamic design this rack will be much quieter than some of its competitors. This ladder rack installs quickly and...
    view full answer...

  • Will MaxxTow Truck Bed Ladder Rack # MT70423 Fit a 2017 Toyota Tundra SV with Bed Liner
  • MaxxTow Truck Bed Ladder Rack # MT70423 is listed as a fit for your 2017 Nissan Titan without the Utilitrack system. The rack has clamps that attach the bases to the truck side rails. If that bed liner you mentioned is a removable type then the ladder rack cannot be safely mounted unless the bed liner was removed. But if it is the factory liner that is basically just a part of the bed it will be fine. Those indentations you mentioned sound like they are covering stake pocket holes in...
    view full answer...

  • Ladder Rack for 2014 Toyota Tacoma With Deck Rail System
  • There are ladder racks which fit your 2014 Toyota Tacoma with the Deck Rail System, though the MaxxTow Truck Bed Ladder Rack # MT70423 is not one of them. Instead, I recommend checking out the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 which does fit your Tacoma with the Deck Rail System and has an 800 lb carrying capacity. The Rola does not come with load stops like the MaxxTow but are available with part # 59794. I've added a photo for you a customer submitted that shows...
    view full answer...


Do you have a question about this Ladder Rack?


Used Items Available
RU-19-M3-00503988

Condition: Surface Scratches

Notes: This part has minor cosmetic damage. Parts were loose in the box which caused the minor damage. This part is in good condition for its application and like new, unused.

Our Price: $194.17

Secure Checkout
RU-19-M3-00406381

Condition: Missing Parts

Notes: Missing end cap on one upright. otherwise in orinal package like new uninstalled

Our Price: $257.24

Secure Checkout


  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality ladder racks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ladder rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Joe V
Expert Research:
Michael L
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Expert Research:
Adam R
Updated by:
Laura H
Video Edited:
Dustin K
Photos by:
Amber A
Photos by:
Sam P
Written by:
Tammy D
Video Edited:
Chris R
Test Fit:
Hayden R
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924