bing tracking image
  1. Jump Starters and Jumper Cables
  2. Bulldog Winch
  3. Jumper Cables
  4. Angled Clamps
  5. 2 Gauge Wire
  6. 20 Feet Long
Bulldog Winch Booster Cable Set - Clamp to Clamp - 2 Gauge - 20' Long

Bulldog Winch Booster Cable Set - Clamp to Clamp - 2 Gauge - 20' Long

Item # BDW20233
Our Price: $125.99
You Save: $44.34
Jump Starters and Jumper Cables
Shipping Weight: 11 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Fastest Shipping and Great prices for Bulldog Winch Booster Cable Set - Clamp to Clamp - 2 Gauge - 20' Long. Read our customer reviews of Bulldog Winch jump starters and jumper cables. Call 1-800-940-8924 for expert service or order your jump starters and jumper cables part number BDW20233 by Bulldog Winch online at
  • All Info
  • Reviews (3)
  • Q & A (0)
  • Videos (2)
  • Photos

Bulldog Winch Jump Starters and Jumper Cables - BDW20233

  • Jumper Cables
  • Angled Clamps
  • Bulldog Winch
  • 2 Gauge Wire
  • 20 Feet Long

  • Heavy-duty booster cable set for work trucks
  • Clamp end to clamp end
  • Double-extruded, copper-clad aluminum wire for easy handling
  • 2000-Amp-rated, premium cast brass clamps with 45-degree angled noses
  • TPE jacket rated to 221 degrees Fahrenheit
  • Storage case included
  • 20' Long
  • 2 Gauge wires

20233 Bulldog Winch Booster Cable Set - Clamp to Clamp - 2 Gauge - 20' Long

California residents: click here

Video of Bulldog Winch Booster Cable Set - Clamp to Clamp - 2 Gauge - 20' Long

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Bulldog Winch Booster Cable Set Review

Hi everyone. It's Evangeline here at etrailer. And today we are looking at our Bulldog Winch booster cable set that's clamp to clamp and ideal for work trucks here at etrailer. It happens every now and then, your battery might die and you're caught in a sticky situation where you need a boost or a jump. So with these heavy duty jumper cables, even if you have an extra large work truck or just a normal car, but you want a premium cable that works well and gets you the power you need, you may want to have these in your truck. These cables come in a case, which is great because then you don't have to store them in your spare tire case, or you don't have to worry about them accidentally getting leaked on.

With this, you just open up those clasps and you have your cable set right inside. Inside you have your 20 foot long 600 AMP two gauge cable. You also have your color coded clamps. So you have your black for your negative, and you have your red for your positive. Taking a look at the design of the clamps, notice how it's angled towards the end, which makes it easier to clamp onto your battery.

Also with these clamps, even though I have small hands, I've had no issue at all with opening and closing these clamps, which are awesome. Even though it is easier to open than other clamps, You still have that spring inside, which keeps it shut. You want that spring to be strong because that way, as it's on your battery, you don't want to worry about it accidentally opening and going off of your battery. So as for the construction for the clamps, those are going to be a cast brass for your clamps. And then for your wiring, they're going to be a copper clad aluminum.

So you want to make sure that it's not solid aluminum, cause that's not going to give you as good enough over gauge. So that copper is going to help you out. Get you that power. Whenever I use jumper cables, I usually worry about actually touching that metal. So it's nice to see that this is completely encased with that insulation.

That way I don't have to worry about accidentally getting in contact with that and I can use this clamp safely. So we took a look at those features, but let's see how they actually work and how those design features help out with the actual jumping process with our two work trucks. So as we hook it up to our cable, notice how we have that angled clamp. So that's going to be great because then it makes it easier just to connect that. As you can see our battery's on the other side of where we have our other work truck parked and that's okay because we do have a 20 foot long cable. So even if you are in a awkward position with your vehicle, you have the length to still reach the other battery. Here we are on our live battery and it has a slightly different design from the other battery, but it's still okay. See how well that angled clamp fits right in there. And now we hook up our negative clamp right there. And then we go see the other side to ground it. As you can see, we have two big trucks right here. So it was really nice to have that two gauge cable because you need that lower or technically higher gauge in order to provide enough energy to jump your battery. But once it is charged up, you can then remove your cables in the opposite order that you put them on. My final thoughts about these cables are if you have a work truck, if you have any larger truck or vehicle and you need that extra power in order to boost yourself whenever you find yourself with a dead battery, cables with these specs are what you're going to want inside of your vehicle when that happens. You want to make sure you have enough gauge, you have enough power and you have enough length for your sticky situations. Now, even if you don't have a work truck, or if you have other vehicles other than your work truck, these are still perfectly fine since they do have all the energy that you need. So it's better to have more than too little. And that was a look here at our Bulldog Winch booster cables for your work trucks here at etrailer. My name is Evangeline and I hope you enjoyed the journey..

Customer Reviews

Bulldog Winch Booster Cable Set - Clamp to Clamp - 2 Gauge - 20' Long - BDW20233

Average Customer Rating:  5.0 out of 5 stars   (3 Customer Reviews)


I have a GMC 3500. I had to get these heavier cables as I burned up my cheap sets helping someone. They had bigger issues. They fried the emergency roadside guy's cables as well (I warned him). These carry a higher load and have worked without fail so far. Although a little bulkier to stow, it's worth it knowing that they will be with me for a long while. The 20' length helps with the reach. Good construction. I'd recommend if you are using them often, are people's first call to rescue them, or are a good samaritan.


Nice box that it came in on time what was expected.


Quality products at great prices. Everything arrived extremely fast. Great job!


See what our Experts say about this Bulldog Winch Jump Starters and Jumper Cables

  • Metal Used in the Bulldog Winch Booster Cable Set BDW20233
    I spoke with my contact at Bull Dog Winch and he informed me that the # BDW20233 uses copper clad aluminum wiring and cast brass clamps.
    view full answer...
  • Can a Winch Be Powered From a Truck Battery Using Battery Cables
    Yes, you can wire your winch with clamps to the truck battery. 2 gauge wire should be sufficient for a 5,000 lb. winch. If you wanted to be sure, you can look in the owners manual to verify the wire gauge needed for your particular winch. You can use something like the Bulldog Winch Booster Cable Set # BDW20233. You would just likely need to cut off one end and wire it to your winch.
    view full answer...
  • Heavy Duty Booster Cables for Trailer
    We do have a number of options for heavy-duty booster cables, and you can make the choice about what you need based on the length you need, as well as if you want the 1-gauge wire or 2-gauge wire. Your options are: - 1-Gauge Wire, 30 Feet Long: Bulldog Winch Booster Cable Set # BDW20333 - 1-Gauge Wire, 20 Feet Long: Bulldog Winch Booster Cable Set # BDW20332 - 2-Gauge Wire, 24 Feet Long: Deka 2 Gauge Professional Service Booster Cables # DW00161 - 2-Gauge Wire, 20 Feet Long: Bulldog...
    view full answer...

Do you have a question about this Jump Starters and Jumper Cable?

Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Cole B
Installed by:
Cole B
Employee Evangeline M
Installed by:
Evangeline M
Employee Matthew S
Written by:
Matthew S
Employee John S
Video by:
John S

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.