Viking Solutions SwiveLift Loading System for 2" Hitches - 300 lbs

Viking Solutions Hunting and Fishing - 310-VSL001

Lift and load your game or gear into your truck bed with the SwiveLift. The winch-powered platform can be raised up above your tailgate and swiveled 360 degrees so that you can easily load your kill or cargo into your truck bed.

Features:

• Loading system helps you lift heavy cargo from the ground and swivel it into your truck bed
  • Load your gear onto the platform and winch it up to your tailgate
  • Rotate the platform to easily push or pull your gear into your truck bed
• Galvanized steel winch securely hoists and holds the platform
  • Solid, 1-piece gears provide maximum durability
  • Pawl engages when you release the handle
  • Galvanized steel cable and hook are strong and durable
  • Handle has a comfortable grip
• 360-Degree rotating mast allows you to swivel your load into your truck bed
• Open-floor platform lets water drain through and prevents grime buildup
• Sturdy and durable steel construction
• Black powder coat finish resists corrosion
• Quick and easy setup with 3 pieces
  • Insert hitch adapter with pivot tube into your hitch receiver
  • Slide platform assembly over the pivot tube
  • Slide upright mast with winch over pivot tube and hook winch cable to platform
• Hitch pin and clip or hitch lock sold separately

Specs:

• Application: 2" x 2" trailer hitch receivers
• Weight capacity: 300 lbs
• Overall dimensions: 55" tall x 58" deep
  • 25" From hitch pin hole to upright mast
  • 45" From bottom of upright mast to top of upright mast
  • 16" From top of receiver tube to top of platform when in the lowest position
• Platform dimensions: 36-1/2" long x 21-1/4" wide
• Travel: 20"
• Cable dimensions: 26' long x 1/8" diameter
• Gear ratio: 3.1:1
• 1-Year warranty

The SwiveLift makes it easy to lift and load heavy cargo into your truck bed on your own. This hitch-mounted elevator features a winch-powered platform for raising your load from the ground to your truck bed. Secure your cargo to the platform with tie-downs and winch it up to your tailgate. Once lifted, swivel the platform over your tailgate and slide your deer or gear into your truck bed.

Setup is quick and easy with just 3 pieces that fit together. Insert the receiver adapter with attached pivoting tube into your hitch receiver. Slide the platform assembly over the pivoting tube. The pivoting tube should be in between the plastic rollers on the platform assembly, which will allow the platform to easily roll up the upright mast. After the winch is secured to the top of the mast, slide the mast over the pivoting tube. Then hook the winch cable to the ring on the platform.

VSL001 Viking Solutions Swivel Lift Lifting System - Hitch Mounted - 300 lbs

Installation Details