Titan Trailer Hitch Pin and Clip for 2-1/2" Trailer Hitches

Titan Trailer Hitch Pin and Clip for 2-1/2" Trailer Hitches

Item # 74149

lowest price pledge

Retail:$16.98

Our Price: $14.16

You Save: 17%
Hitch Pins and Clips

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.72 lbs

Quantity: 
In Stock
Reese Hitch Pins and Clips - 74149
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed


  • Fits 2-1/2 Inch Hitch
  • Standard Hitch Pin
  • 5/8 Inch Diameter
  • Reese
Call 800-298-8924 to order Reese hitch pins and clips part number 74149 or order online at etrailer.com. Free expert support on all Reese products. Guaranteed Lowest Price and Fastest Shipping for Titan Trailer Hitch Pin and Clip for 2-1/2" Trailer Hitches. Hitch Pins and Clips reviews from real customers.


  • All Info
  • Reviews (37)
  • Q & A (17)
  • Videos (2)
  • Photos
  • Why etrailer?

Reese Hitch Pins and Clips - 74149


Pin and Clip for 2-1/2" Square Trailer Hitch Receivers

  • Fits trailer hitches with a 2-1/2" x 2-1/2" receiver opening
  • Has 5/8" diameter pin
  • Measures 6" long straight from end to end
  • Zinc finish
  • Limited One-year Warranty


63243 Titan Trailer Hitch Pin and Clip for 2-1/2" Trailer Hitches

Tow Ready 63243, Reese 74149






California residents: click here


Video of Titan Trailer Hitch Pin and Clip for 2-1/2" Trailer Hitches


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Titan Trailer Hitch Pin and Clip Review

Today we're going to be taking a look at the Reese Titan Trailer Hitch Pin and Clip for 2 1/2 inch trailer hitch receivers, part number 74149. This pin and clip fits trailer hitches with 2 1/2 by 2 1/2 inch receiver openings. It has a zinc-plated finish, so it's going to resist rust and corrosion. From end to end it measures 6 inches long, so you have plenty of room to work with. The pin diameter is 5/8 of an inch. Use it to secure all of your 2 1/2 inch trailer hitch accessories.

That's going to complete our look at the Reese Titan Trailer Hitch Pin and Clip for 2 1/2 inch receivers, part number 74149.


Customer Reviews

Titan Trailer Hitch Pin and Clip for 2-1/2" Trailer Hitches - 74149

Average Customer Rating:  4.7 out of 5 stars   (37 Customer Reviews)


- 74149
by:

it look good And work grate I would recommend this 660245



- 74149
by:

I ordered a Class V ball and ball mount with pins. This is for the 2.5 inch heavy duty receiver. I needed a set-up for pulling an emergency services boat that weighs over 18,000 lbs. I was able to get a set-up rated at 20,000 lbs, in stock. Shipping was fast and quality looks good. 412972



- 74149
by:

Great product. . 663591



- 74149
by:

Product was exactly what I ordered and arrived promptly. 658010



- 74149
by:

Great item. Quick delevery 513348



- 74149
by:

Unbelievable Service! Order placed and shipped same day! Thanks 511385



- 74149
by:

good quality hitch pins, order two because one will get misplaced! lol 485920



- 74149
by:

Well built, good price 466059



- 74149
by:

This pin has made such a difference in using my receiving hitch. No more cramped, small space. 453104



- 74149
by:

It's a hitch pin. It works fine on my Silverado's 2.5-inch receiver. 436553



- 74149
by:

good 371497



- 74149
by:

Product is as described, rock solid, fast delivery 372002


Comments

Everything is excellent

Roy C - 04/24/2018

37569

- 74149
by:

Nice hefty feel. Also bought the longer pin needed for our Tacoma thicker walled hitches. 355542



- 74149
by:

Bought this to attach an extension I purchased. Seems to be good quality. 317366



- 74149
by:

Very nice. Excellent quality 312126



- 74149
by:

Product was exactly as advertised. Very fast delivery. 264554


Comments

Product has been fine.

Roy H - 06/25/2017

25431

- 74149
by:

I ordered this as my pin from previous hitch was not long enough on my new 2015 RAM 3500 with 2-1/2" hitch. It was a little unclear if this one would definitely work as my factory hitch also has a good lip around it requiring some more clearance. Works great, even an extra inch or so! The clip is also easy to take on and off so bonus here. I did end up trimming just a little length off the clip as it butted up against the back plate but still went on. 238311



- 74149
by:

Quick delivery. Good product. 234869



- 74149
by:

quality product that works as designed and advertised 206287



- 74149
by:

Long enough to work on the big hitch. Good quality. 189051



- 74149
by:

A pin is a pin. However, purchasing the pin though etrailer.com was very easy and without any issues. The product was delivered in just a couple days, as advertised... Would do it again. 184363



- 74149
by:

I could not find a hitch pin for a 2 1/2" receiver anywhere until I check etrailer. They had two delivered in three days. Very response service. Thanks! 174679



- 74149
by:

Paid extra for speedy delivery. It was worth it. Thanks so much will buy from you again 170682



- 74149
by:

Good product just wish it had a hole to put the hitch pin in. Maybe its me but the hole seems to lock the pin better. 131579


Comments

Hasnt broke yet so I guess its fine

JS - 05/21/2015

11939

- 74149
by:

As advertized 129355



- 74149
by:

Finally a pin that I do not have to fight to get the clip on!!!!! 116853



- 74149
by:

High Quality product. 115773



- 74149
by:

Substantial pin as expected for class V. The retaining hair pin slips on and off very easily. Carry a spare. 109573



- 74149
by:

Good selection to choose from and good prices. 108912



- 74149
by:

Haven't used this product yet. Bought it as a back-up to my locking hitch pin. Looks to be of good quality, and I'm sure it'll do the job when called. 98518



- 74149
by:

Not much you can say about this item.......other than it is not cheaply made, something I have come to expect from Etrailer.....alway's quality merchandise at a competitive price. Delivery is as it should be, a few days, add a couple if over a weekend. Anything I need for rolling stock in the rv field, Etrailer is my first go to place to shop. 71997



- 74149
by:

I prefer the pin with a hole as compared to the slot. Would not have needed this longer pin and reducing sleeve if Ford didn't always think it has a better idea. I was not able to find the longer pin or the sleeve in the local stores. 71605



- 74149
by:

Product was exactly as I wanted and ordered. Super service, fast shipping. Ordered on a Saturday, and it shipped on that same day. Excellent, keep up the good work. Don't have a picture of the product, for it is pretty boring looking, but do have a picture of my shirt I will send you. 62076



- 74149
by:

Works great for my 2.5" receiver. Bought with a new hitch and ball as well. This was my first purchase with etrailer, and I have to say they have earned themselves a repeat customer. Lightning fast shipping and great communications on where my order status was. Thanks! 33937



- 74149
by:

Good quality 27182



- 74149
by:

Great 9768



- 74149
by:

Hitch Pin and Clip Seems like a well made product. 4322


37
37

Ask the Experts about this Reese Hitch Pins and Clips
Do you have a question about this Hitch Pins and Clip?


  • Why Won't etrailer.com Ball Mount Kit for 2-1/2" Hitches Fit Ford Factory 2-1/2 Inch Hitch Receiver
  • The reason the etrailer.com Ball Mount Kit for 2-1/2" Hitches # EBMK25518 will not fit the factory 2-1/2" hitch receiver on your 2018 Ford F-350 is that those receivers have edges which are a bit rounder than standard hitch receivers and this ball mount has square edges. I recommend checking out the Titan Ball Mount for 2-1/2" Receivers # 45123 which has a 5" drop and from the accompanying photo you can see how the shank has more rounded edges. With this ball mount you will want...
    view full answer...

  • Recommended 2-1/2" to 2" Reducer Sleeve for 2019 Ford F-250
  • The hitch reducer sleeve I strongly recommend for the 2-1/2" hitch on your 2019 Ford F-250 is the B&W Hitch Receiver Reducer Sleeve # BWRHXA2182 because it has two sets of pin holes to allow for a more custom fit on your Ford hitch. If your F-250 has a Ford factory hitch or Draw-Tite hitch, insert the reducer sleeve so the pinched ends face the sides; if you have a Curt aftermarket hitch, insert the sleeve so that the ends are positioned on the top and bottom of your receiver. That...
    view full answer...

  • How is the Reese Titan Hitch Box Extension Supported and Does it Require Stabilization Chains
  • The trailer hitch on the truck is what supports the extension. The extension is designed to fit in a 2-1/2 inch receiver (measuring on the inside) and the receiver part of the extension has a 2 inch receiver opening. The only thing you need for the extension is a properly sized hitch pin like # 74149. For lateral, back and forth movement of the extension, it is normal to see some play. Reese does not make any lateral stabilization chains for the Titan extensions. You will need to...
    view full answer...

  • Weight Capacity of Curt Class V 2-1/2 Inch Hitch Receiver, Part # C15810
  • You are correct that the product description for the Curt Class V 2-1/2 Inch Hitch Receiver, Part # C15810, shows the same tongue weight and gross towing weight ratings with and without weight distribution. This is because unlike lower capacity hitches, say a Class III, this Class V hitch is already rated at or near the vehicle structural limits. Strictly speaking, adding a weight distribution setup would give this hitch receiver higher capacity, but it would serve no purpose. Unless...
    view full answer...

  • Class V Trailer Hitch that Will Fit a 2007 Dodge Ram 2500 with a Factory Installed Trailer Hitch
  • You will not be able to remove the factory hitch on your 2007 Dodge Ram because it is welded and integrated into the bumper cross member which it welded to the truck frame. You would need to use a hitch that fits around the factory hitch. For a Class V hitch, you can use Curt # C15809. This hitch will also give you a 2-1/2 inch receiver and a capacity of 2,700 pounds tongue weight and 20,000 pounds gross trailer weight. I have included a link to the installation instructions for you....
    view full answer...

  • Is the Curt 5-Bike Rack Easy to Remove and Install
  • The Curt Premium 5-Bike Rack # C18065 is not difficult to install and remove but it will take more time than other 5-bike racks. The reason for this is it uses a threaded anti-wobble hitch pin to lock inside your hitch that needs to be screwed in and unscrewed to install and remove the rack. If you do want to save some time and effort the better option is the Yakima RidgeBack 5-Bike Rack # Y02459, with the trade-off for the convenience the RidgeBack offers being a larger price tag. The...
    view full answer...

  • Hitch Extender for 2-1/2" Hitch on 2016 Ford F-350 Super Duty
  • It seems like you have a 2-1/2" hitch on your 2016 Ford F-350 and for that you can use Extension # RP45018, which you can secure to your hitch with Pin and Clip # 74149, though be aware it may not work with some OEM Class V hitches that have rounded edges. This extension can be cut to 41" which will give you a towing capacity of 5,000 lbs or 7,500 lbs if you are using a weight distribution system. Keep in mind this extension will reduce the receiver to 2" so if your current ball mount...
    view full answer...

  • CURT Trailer Hitch # C15809 Recommendation for a 2012 Dodge Ram 3500
  • Yes, this CURT Trailer Hitch # C15809 is confirmed to fit on your 2012 Dodge Ram 3500 Megacab. I attached installation instructions for you to check out also. You may also be interested in the following items to complete your towing setup: etrailer.com Ball Mount and Ball # EBMK25318 Draw-Tite Wiring # 119178KIT Pin and Clip # 74149
    view full answer...

  • Recommended Trailer Hitch To Tow 2 Horse Trailer with 2004 Dodge Ram Truck
  • With the trailer load you will be carrying, using the Curt Trailer Hitch Receiver, part # 13333, would put you near or slightly over the tongue weight capacity of the hitch, which is 600 lbs. If you were to use a weight distribution system when carrying your horse trailer you would be ok to use the Curt # 13333 Hitch. Tongue weight is calculated to be about 10 to 15 percent of the Gross Trailer Weight. I would recommend using the Curt Class V Trailer Hitch, part # C15409. This hitch...
    view full answer...

  • Will Convert-A-Ball Cushioned Ball Mount for 2-1/2 Inch Hitches # AMSCV-2 Fit a 2011 Ford Super Duty
  • The Convert-A-Ball Cushioned Ball Mount for 2-1/2 Inch Hitches, part # AMSCV-2, will fit your 2011 Ford Super Duty if it has a 2-1/2 inch receiver. It has a towing weight capacity of 18,000 lbs and a tongue weight capacity of 2,000 lbs. This ball mount has a 2 inch drop and a 3/4 inch rise. To determine the drop or rise you will need for towing you will need to measure the hitch height on your truck. With the vehicle parked on level ground, measure to the top of the 2-1/2 inch receiver...
    view full answer...

  • What Size are the Mounting Holes on Draw-Tite Pintle Hook Combo # 63012
  • I walked out to our warehouse and measured the mounting holes of the Draw-Tite Pintle Hook Combo # 63012. The holes measured 1/2 inch in diameter, and the kit includes the necessary 1/2 inch bolts. If you have the Titan Forged Pintle Hook Mounting Plate # RP45294, it will match up to attach to the Draw-Tite Pintle Hook Combo # 63012. You will also need to use a 5/8 inch diameter pin like the Titan Trailer Hitch Pin and Clip, part # 74149.
    view full answer...

  • Length of Hitch Pin from Bend to Groove
  • I went out to our warehouse to measure the Titan Trailer Hitch Pin and Clip # 74149. I found that it measures 4 inches from the bend to the inside of the groove. It measures 4-1/4 inches from the bend to the outside of the groove. It measures 4-3/4 inches from the bend to the end of the pin. I have attached a diagram showing these measurements for you.
    view full answer...

  • Recommended Hitch Pin to Use with 2-1/2" Receiver and Ball Mount on 2016 Dodge Ram Pickup
  • For a hitch pin to use with the 3 inch outer diameter (2-1/2 inch receiver opening) hitch on your 2016 Dodge Ram Pickup, I recommend the Reese Titan Trailer Hitch Pin and Clip # 74149. This Pin and Clip is designed to fit 2-1/2 inch trailer hitches and has a diameter of 5/8 inches, making it compatible with the 5/8 inch hole on your ball mount as well. The pin measures 6 inches long from end to end.
    view full answer...

  • Hitch Pin with Hole in the End for the Clip for a 2015 Ford F-250 with 2-1/2 Inch Trailer Hitch
  • Curt hitch pins # C21500 and # C21510 have holes in them for the clip. Or you might like MaxxTow pin # MT70053 better. It has a handle that makes handling the pin easier and it has a hole for the clip. The useable length is 3-5/8 inches so it is going to clear a 2-1/2 inch hitch better than the other 2 options above.
    view full answer...

  • Will Convert-A-Ball Ball Mount # AMSCV-6 Fit Factory 2-1/2 Inch Hitch on 2019 Ford F-250
  • The Convert-A-Ball Ball Mount # AMSCV-6 referenced in your question will work perfectly with the 2-1/2 inch factory receiver on your 2019 Ford F-250. This sturdy steel ball mount will slide right into the 2-1/2 inch receiver without the need for an additional adapter and its polyurethane interior acts as a shock absorber to reduce bounce and vibration. It is made right here in the USA and features an 18,000 pound towing weight capacity. You will just need to add a standard pin and clip...
    view full answer...

  • Stainless Hitch Locking Pin for 2-1/2 inch Receiver with Keyed Alike Trailer Coupler Lock
  • Yes we do have a stainless hitch locking pin for 2-1/2 inch receiver with keyed alike trailer coupler lock. You will want part # RH5-XL. This part has an inside width of 3-1/16 inches. I have included a link to a video review of this lock for you. When ordering the parts you will just need to choose the keyed alike option that is located just under the price on the product page of that item.
    view full answer...

  • Recommendation for a Class V Trailer Hitch that Will Fit a 2007 Dodge Ram with Factory Trailer Hitch
  • We do have several trailer hitches that are designed to fit beneath the factory trailer hitch on a 2007 Dodge Ram. You can use Curt Trailer Hitch # C15704 if you want a 2-1/2 inch trailer hitch receiver. Hitch # C15409 has a 2 inch receiver. The recommended ball mount for a 2-1/2 inch hitch is # RP45322, and you can use pin and clip # 74149. For a ball you can use # A-90 (2 inch diameter) or # 19286 (2-5/16 inch diameter). For trailer wiring, if your truck has a tow package with a 7-Way...
    view full answer...


Do you have a question about this Hitch Pins and Clip?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality hitch pins and clips for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch pins and clip information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Video Edited:
Jacob T
Installed by:
Brandon M
Updated by:
Laura H
Video by:
Dustin K
Photos by:
Amber A
Installed by:
Hayden R
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.