summer hauling headquarters

Price: $23.95

In Stock

Combo Bar 12" with 2" Trailer Hitch Receiver - Unpainted

Item # E-11

lowest price pledge

Retail:$30.60

Our Price: $23.95

Hitch Fabrication Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 7 lbs

Estimated Delivery: Monday, August 27

Enter a zip code for a more accurate estimate.

Quantity: 

In Stock
curt hitch fabrication parts fits 2 inch combo bar 12 with trailer receiver - unpainted
zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

spin image icon
E-11 - Raw Finish Curt Hitch Fabrication Parts
E-11 - Fits 2 Inch Hitch Curt Hitch Fabrication Parts
E-11 - 12 Inch Long Curt Receiver Tube
Combo Bar 12" with 2" Trailer Hitch Receiver - Unpainted 12 Inch Long E-11
E-11 - Raw Finish Curt Receiver Tube
Curt Hitch Fabrication Parts - E-11

Customer Photos

Videos


  • Receiver Tube
  • Fits 2 Inch Hitch
  • 12 Inch Long
  • Curt
  • Raw Finish
Call 800-298-8924 to order Curt hitch fabrication parts part number E-11 or order online at etrailer.com. Free expert support on all Curt products. Guaranteed Lowest Price and Fastest Shipping for Combo Bar 12" with 2" Trailer Hitch Receiver - Unpainted. Hitch Fabrication Parts reviews from real customers.


  • All Info
  • Reviews (47)
  • Q & A (18)
  • Videos (1)
  • Photos
  • Why etrailer?

Curt Hitch Fabrication Parts - E-11


2" x 2" receiver bar sized and punched to fit all common weight-distributing hitch ball mounts or utility ball mounts.

  • Forged collar
  • 12" long
  • Raw finish



Video of Combo Bar 12" with 2" Trailer Hitch Receiver - Unpainted


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Curt Hitch Accessories E-11 Review

Today we're going to review Part Number E-11. This is Curt 12" long combo bar with the 2" trailer hitch receiver opening in an unpainted finish. This part is designed for use in fabricating under cover receiver hitches, when there's no receiver available. It is made of a cold formed structural tubing. It is sized and punched to fit all common weight distributing hitch ball mounts, or utility ball mounts. Has a forged collar, as you can see right on the opening here.

Again, it's an unpainted, raw finish. The reason that do that; it's ideal for welding, because it will save on your prep time during installation. A few dimensions on this; overall length again from edge-to-edge, going to be right at 12". Again, the opening is going to be 2" x 2". The measurement of the hitch pin hole from the very front to the center of the hitch pin hole is going to be right at 2 1/2". That should do it for the review on part number E-11. The Curt 12" long combo bar with the 2" trailer hitch receiver opening in an unpainted finish.

.


Customer Reviews

Combo Bar 12" with 2" Trailer Hitch Receiver - Unpainted - E-11

Average Customer Rating:  4.9 out of 5 stars   (47 Customer Reviews)


- E-11

by:


I have a Billy Goat Leaf Loader swing away hitch mount but it didn't come with a hitch to pull a trailer I have a 4x8 open trailer (2000 lb max). So I decided to weld a hitch to it. I also used 1/4 inch thick metal to reinforce the hitch and used etrailer's Safety Chain Loop for Hitch Receivers. I used mig welder with 120amps and had to make extra beads, 3 to 4 beads in some spots i primed it and painted it works great! Thank You etrailer!!! 163537


Comments

its holding up and works great! still towing a 4x8 open trailer with it! No rust coming through.. very Solid and Strong

Omar M - 12/08/2015

16106

- E-11

by:


Grade A product. Fast shipping! I bought 2 of these to weld on the back of an off road mini camper i am building. They will be supports for stabilizing jacks. 3' square 2 x 2 will slide up and down in them with a foot pad welded to the bottom. 333878


Comments

I used these as leveler guides a year ago. I dont think i will ever have to replace them as long as the off rd trailer last. They are very heavy duty quality. I would post a picture of them in use on finished product if i could.

Allen C - 01/19/2018

33402

- E-11

by:


The product is heavy duty. The quality of the weld work is exceptional. Would recommend this product. Packaged well. Bought a curt rubber end cap. Which by the way is another exceptional product (great quality rubber cap) drilled a few holes painted it and works like a champ. Now I can build a carrier for front of my pickup. 137070



- E-11

by:


Didn't notice before I bought it, but the support protection ring at the opening is a cast piece, nicely rounded and smooth for a professional install and less likely to yield scrapes when reaching around to hook up chains. As such it is also a complete loop, no joints, and it's welded top and bottom to receiver so it won't pop off if it were to scrape some concrete here and there. Some that I looked at were welded only on one side. 338864



- E-11

by:


Product was exactly as advertised. Shipping was fast and pricing was good! I would purchase from this seller again without hesitation!!! I will be using this product to create a Spare Tire Carrier for my motorhome. :-)) 71062


Comments

I used this product to build a spare tire rack in preparation for our trip to Alaska. Your product was tough and durable allowing me to weld the two pieces together forming a receiver for the tire rack.

-- comment by: Daniel - 03/19/2014

3182

- E-11

by:


Not only was this the best price I found online, but it was delivered very fast . The item came even better than described ! It was unpainted, as described, Plus it was wrapped in plastic, I assume to prevent any flash rusting. Great idea. Very Professional !!! Highly recommend this Seller !! The product was super also ... 176301



- E-11

by:


Heavy duty, well-made. I bought the unfinished combo bar so that I could weld a coupler to it (I was assembling a device to make it easier for RV dealers to service my travel trailer that features a Hensley Arrow unit). It works like a charm, and was easier to assemble in its raw form. Also easy to paint after assembly. 251246



- E-11

by:


We added this receiver to our bumper for front mounting. Etrailers is our first choice for all trailer accessories. 304342



- E-11

by:


I bought two 2" receivers 12" long to customize my snow plow for support on each side of the frame. I ordered them and got them less than a week along with e-mails up dating me on the status of delivery. I am very happy with the quality of the product and the service I recieved. Thanks etrailer. 175712



- E-11

by:


Turned out awesome, Can Am said they don't make receivers for the OUtlander model so I did! 514501



- E-11

by:


Hitch receivers arrived as promised. The product was much better than I expected. It's just an extra receiver to weld on an existing hitch, but it has a brass collar at the receiving end...very nice, and an extra bonus. I will go to etrailer.com first for any other parts I need. 29152



- E-11

by:


Nice receiver, I welded these to my welding trailer for moving my vise, bench grinder and other accessories around. With small 1.5" welds with 1.5" spaces down each side makes for a solid bond and no warping so hitch still slides smoothly. 258911



- E-11

by:


It has a really nice forged steel collar around the outside unlike the typical doubled up tube that most receivers use. it will make my custom hitch look great. well worth what I thought was a premium price. 163107



- E-11

by:


Bought receiver to fabricate a hitch for my tractor. It's a piece of steel but exactly what I needed. eTrailer has always had competitive prices and great service. Very happy. 314034



- E-11

by:


The product I ordered seem to be good quality and exactly what I needed. I would recommend etrailer.com to anyone looking for these type of products. 171386



- E-11

by:


Very nice product a lot better quality then most I have seen and perfect for those of us who build things ourselves or have unusual applications. 208240



- E-11

by:


Great place to deal with, would recommend to anyone, Stacey really hooked me up with what I was looking for and kept me updated on everything. 514386



- E-11

by:


Quite pleased with etrailer ball hitch accessories which I am using on a spindle wheel motorcycle carrier behind a fifth-wheel trailer..... 420211


Comments

They are all serving their intended function just fine. Thanks

Byron - 08/07/2018

42040

- E-11

by:


Super fast shipping! I got an upgrade on the shipping and this receiver is HEAVY DUTY! Don't let the price fool you, this beast is great! 335845



- E-11

by:


Timely delivery and professional communications. I will use them again. Item appears as advertised. I have not installed it yet. 519812



- E-11

by:


I made a receiver hitch that would bolt onto my camper bumper. I needed this receiver to make the hitch. It worked perfectly. 388488


Comments

Thoroughly pleased with the hitch I made. Works great.

Darryl - 06/04/2018

39248

- E-11

by:


Ordering was easy and quick and arrived on time. Mandy was a great help in ordering it and I will be dealing here again. 271958



- E-11

by:


Product was built well. Delivered earlier than expected and it fit my application perfectly. Thank you very much! 506698



- E-11

by:


Product was exactly as described. Shipping was extremely fast. Will purchase another to make a spare tire holder. 127756



- E-11

by:


Have been buying these for quite some time. Always timely deliveries and never any issue with the product. 372463



- E-11

by:


Item was exactly what I needed and as described. Fast shipment. Will order from e trailer again. 190179



- E-11

by:


Product was just what I was looking for. The shipping was fast and the communication was great! 235138


Comments

All good. No problems.

Alan H - 03/12/2017

22735

- E-11

by:


Great prices cheap fast shipping HUGE selection of towing assoryers best I have found. 494299



- E-11

by:


Great customer service! We never have any issues when ordering from E-Trailer! 236226



- E-11

by:


Great seller, fast shipping and good communication and follow up!!! 321711



- E-11

by:


Very well put together product that will hold up for many years 189947



- E-11

by:


Arrived in good condition and on time. Thanks 275944



- E-11

by:


Good product, good fit. Very happy with this 337269



- E-11

by:


Very well made part and works as expect ed 153660



- E-11

by:


Fast service and a quality receiver hit ch 134899



- E-11

by:


great price deliver on time will be back 277126



- E-11

by:


just what i order shipping was fast 424480



- E-11

by:


Great item i wold buy it again 340410



- E-11

by:


Easy ordering, fast delivery. 319103



- E-11

by:


Exactly what I was looking for 78911



- E-11

by:


Great product. Great service. 271859



- E-11

by:


Product was as purported. 207360



- E-11

by:


Great product and design 240187



- E-11

by:


like your promp service 53455



- E-11

by:


Everything is perfect 23072



- E-11

by:


good product 461348



- E-11

by:


As expected. 305163


49
49

Ask the Experts about this Curt Hitch Fabrication Parts
Do you have a question about this Hitch Fabrication Part?


  • Recommended Trailer Hitch for 2012 Toyota Prius V Compatible with Thule 4 Bike Rack
  • The Combo Bar 12" with 2" Trailer Hitch Receiver # E-11 will work with a 4 bike rack for your vehicle if you have proper mounting and welding done. My recommendation is to instead use the EcoHitch Hidden Trailer Hitch Receiver 2" # 306-X7192 which is confirmed to fit. You can then use the Thule Hitching Post # TH934XTR or any of the other Thule 4 bike racks I've linked. If the rack you choose does not come with locks, I recommend the Thule Snug Tite Hitch Lock and Anti-Rattle Device...
    view full answer...

  • Can Bulldog Winch Hitch Mount Storage Bracket # BDW20154 be Used when Operating the Winch
  • The Bulldog Winch Hitch Mount Storage Bracket # BDW20154 is meant to just hold a winch on a hitch mounted winch mount. It isn't meant to be used while using the winch or as an attachment point itself. What you could do though is weld on a combo bar, # E-11, and use that since it is rated for carrying weight.
    view full answer...

  • Option for Mounting Electric Trailer Winch to Floor of Car Hauler Trailer
  • What a lot of people do to mount a winch like the Superwinch Tiger Shark Series # SW1595200 to the floor of a trailer is use a hitch mount like the part # C31010 and then fabricate a hitch opening to the floor of the trailer like the # E-11. The hitch mount route allows the winch to easily be removed from the trailer if needed as well.
    view full answer...

  • Recommended Combo Bar With 2 Inch Receiver Opening To Weld To Horizontal Crossbar
  • The flanges on part # E17 are spaced 2-3/8 inches apart and designed to be welded to a bar that fits between them. We also have a couple combo bars that may work better for you. The first is part # E-9. This is a 6 inch combo bar that has a 2 inch receiver opening and a collar. The next combo bar we offer is part # E-11. This bar measures 12 inches long and it also has a 2 inch receiver opening and a collar attached. Since you said you are wanting to weld it to a horizontal...
    view full answer...

  • Availability of a Combo Bar with 2 Inch Opening Made of 1/4 Inch Steel Tubing
  • I went out to the warehouse and pulled the Curt combo bar # E-11 and a Hidden Hitch combo bar # 80818. The hidden Hitch bar is 1/4 inch steel tubing and the Curt bar is slightly less, about 0.21 inches. Going with a Hidden Hitch, Draw-Tite, or Reese combo bar should get you closer to what you need. Otherwise a machine shop should be able to fabricate a bar to your specifications. I made a short video showing the measurements for you.
    view full answer...

  • Trailer Hitch Receiver Compatible With 1989 Chevy G30 RV On Cutaway Van Frame
  • For your 1989 Chevy Van Cutaway, I recommend the Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class III - 2" # 41121. If this will not fit with the waste water tank, then I recommend the Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703. If these brackets won't fit, you will need to make a completely custom hitch made by a professional welder. If this is the case, they often like beginning with the Combo Bar 12" with 2" Trailer Hitch Receiver...
    view full answer...

  • Welding a 2 Inch Receiver to a Steel Plate on a 1998 GMC C/K Series Pickup Truck
  • Reducer sleeve # 58102 is made of steel. The same steel used to make trailer hitches. The wall thickness is 1/4 but varies slightly from sleeve to sleeve. This reducer sleeve is not really meant for the purpose you want. I have a better option for you. You could use a hitch fabrication part such as # E-9, # E-11, # 2852, # 80818, or # E17. The ones that are raw steel would be much better for welding and they are designed for applications like you are describing.
    view full answer...

  • What Are the Gross Towing and Tongue Weight Capacities of Curt Combo Bar # E-11
  • The Curt Combo Bar with 2-Inch Trailer Hitch Receiver # E-11 does not carry a specific tongue weight or towing capacity because these ratings are entirely dependent on the specific installation. The surfaces it is welded to and the manner of installation will be the determining factors in its actual capacity. I verified with Curt that this item carries no specific ratings since it is a general-purpose item like their 6-inch # E-9 and the Reese # 11029. These items also are not specifically...
    view full answer...

  • Option for Mounting Winch in Toy Hauler Cargo Area Floor
  • What a lot of people do to mount a winch like the Superwinch Tiger Shark Series # SW1595200 to the floor of a trailer is use a hitch mount like the part # C31010 and then fabricate a hitch opening to the floor of the trailer like the # E-11 welded to the frame or a crossmember of it. You'd have to cut a hole in the floor to accomplish this. The hitch mount route allows the winch to easily be removed from the trailer if needed as well.
    view full answer...

  • 12 inch Long Hitch Tube Recommendation that has a 2 inch Opening
  • The Brophy Hitch Reducer # HR26 has a tongue weight capacity of 500 lbs. I have a better solution for you since this was not designed for welding to a bumper. For a product that is very similar that is designed to be welded and used as a hitch opening check out the Combo Bar 12" with 2" Trailer Hitch Receiver # E-11. This is also 12 inches long. Check out the review video I attached as well. When installed on your bumper it will have the same capacity as the bumper as long as it is welded...
    view full answer...

  • Options to Add 2-Inch Receiver Tube to Car Lift for Use with Winch Mount
  • We have not before had another customer inquire about your specific application but we do have hitch fabrication parts that might work for you. Please see the linked page. Based on the substantial material of your lift a weld-on part like the 12-inch Curt Combo Bar # E-11 or the 6-inch # E-9 might be the most direct way to add the 2-inch receiver you want for your winch mount. I suggest making a call to the manufacturer of the lift system just to make sure they have no issues with...
    view full answer...

  • Will a Class IV Ball Mount Fit 12 Inch Combo Bar # E-11
  • A Class IV trailer hitch receiver should still have a 2 inch square opening so a Class IV ball mount would work in combo bar # E-11. The combo bar does not have a rating so the entire fabricated hitch would need to be confirmed to have the capacity to match or exceed the ball mount you are using by whomever is fabricating it.
    view full answer...

  • Replacement RV Trailer Hitch Compatible with Workhorse Chassis
  • We don't have a specific V shaped option compatible with your Workhorse Chassis. The only options we have a straight bars like Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide # 5350. For your application, it sounds like you will need to have a shop make something custom for you. I recommend starting with the Combo Bar 12" with 2" Trailer Hitch Receiver - Unpainted # E-11 and having something custom welded for your application. If you were to alter something like the Draw-Tite...
    view full answer...

  • Would Bulldog Winch BDW15019 Mount to Trailer Floor and Work Well to Load 2,500 lb Car
  • The Bulldog Winch part # BDW15019 would easily pull a 2,500 lb race car into an enclosed trailer. It has a 4,400 lb capacity which would make easy work of that weight. Bulldog winches are very reliable too. What a lot of people do to mount a winch to the floor of a trailer is use a hitch mount like the part # C31010 and then fabricate a hitch opening to the floor of the trailer like the # E-11. The hitch mount route allows the winch to easily be removed from the trailer if needed...
    view full answer...

  • Outside Diameter of the Curt Combo Bar # E-11
  • The outer tubing of the Curt part # E-11 is 2-1/2 inches by 2-1/2 inches. This would fit well in a 2-1/2 inch hitch, but this is not the intention of this product so I can't really recommend you use it like that since it never has been tested. Especially considering the capacities you are looking for.
    view full answer...

  • Part Needed to Install Towing Style Hitch Bike Rack
  • It sounds like you may have a towing type bike rack like the Swagman Traveler XCS # S64664. This type of rack does indeed have a box-like attachment point that is intended to slip over the shank of a ball mount like Draw-Tite # 2923 before the ball mount is installed in the 2-inch hitch receiver tube. We do offer extra-long ball mounts like # 80232, which measures 15-3/4-inches from the center of the hitch pin hole to the center of the ball hole. This would give you the 12-inches of room...
    view full answer...

  • Using Agri-Cover SnowSport Utility Plow # A40000HD on 1992 Dodge Dakota
  • Your best bet would be to contact a local metal fabrication shop and have them fabricate one for you. You could use a receiver tube like # E-11. You'd want to have the front mounted hitch constructed so that the bottom of the receiver tube sits no lower than 8 inches off the ground or no higher than 16 inches off the ground.
    view full answer...

  • Can Curt Multipurpose Ball Mount D210 be Used with a Hitch Mount Winch Carrier
  • Curt Multipurpose Ball Mount # D210 was meant for accessories such as bike racks or cargo carriers. The force of a line pull from a winch may be too much for the receiver portion of the D210. What I recommend is to make a mount using a combo bar such as # E-11. Weld this guy in place as much as possible on the trailer. The more contact with the mounting surface the better.
    view full answer...


Do you have a question about this Hitch Fabrication Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality hitch fabrication parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch fabrication part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Photos by:
Jim W
Expert Research:
Jeffrey L
Photos by:
Zach O

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.