bing tracking image
  1. Hitch Fabrication Parts
  2. CURT
  3. Receiver Tube
  4. Fits 1-1/4 Inch Hitch
  5. 6 Inch Long
  6. Raw Finish
Combo Bar 6" with 1-1/4" Trailer Hitch Receiver

Combo Bar 6" with 1-1/4" Trailer Hitch Receiver

Item # E-911
Our Price: $18.42
You Save: 57%
Hitch Fabrication Parts
Shipping Weight: 1.79 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos


Need help with installation?
Locate installers near me
1-800-940-8924 to order CURT hitch fabrication parts part number E-911 or order online at Free expert support on all CURT products. Great prices and Fastest Shipping for Combo Bar 6" with 1-1/4" Trailer Hitch Receiver. Hitch Fabrication Parts reviews from real customers.
  • All Info
  • Reviews (77)
  • Q & A (0)
  • Videos (1)
  • Photos

CURT Hitch Fabrication Parts - E-911

  • Receiver Tube
  • Fits 1-1/4 Inch Hitch
  • 6 Inch Long
  • Raw Finish
  • CURT

  • Accepts any 1-1/4" x 1-1/4" ball mount shank
  • 1/2" Forged collar reinforced for increased strength
  • Raw finish allows for immediate welding
  • Pre-drilled hitch pin hole included
  • Assembled in the USA


49506 Combo Bar 6" with 1-1/4" Trailer Hitch Receiver

Replaces E-911

Video of Combo Bar 6" with 1-1/4" Trailer Hitch Receiver

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Curt Hitch Fabrication Parts - Receiver Tube - E-911 Review

Today we're going to be taking a look at part number E-911. This is the Curt six-inch Combo Bar with an inch and a quarter trailer hitch receiver. This is a hitch fabrication part so it's designed to be welded on to your particular application. It's going to have a nice forged collar design. Steel construction with a nice raw finish so it can easily be welded on to your application. It's going to require less prep work.

That's why they do the raw finish. This right here is going to be your half inch pinhole that goes all the way through. Now if you need a pin and clip that's going to match this receiver you can find that here at our website using part number PC2. I'll take a measurement of the width here at the back. Outside edge to outside edge is going to be one and five-eighths of an inch. We do that up front, measuring from edge-to-edge on that collar that's going to be about two and one-eighth of an inch.

A few other measurements to go over real quick, taking the measurement from the center of the pinhole to the back of the receiver, that's going to give us a measurement of about 4 inches. From the center of the hinge pinhole to the opening of the receiver, that's going to give us a measurement of about two inches. Then the overall length from front-to-back is going to be about six inches. That's going to do it for today's review of part number E-911. This is the Curt six-inch Combo Bar with and inch and a quarter trailer hitch receiver. .

Customer Reviews

Combo Bar 6" with 1-1/4" Trailer Hitch Receiver - E-911

Average Customer Rating:  4.9 out of 5 stars   (77 Customer Reviews)


Nice raw steel item. Made a hidden hitch for my smart car. You can buy them for $400 or more. I have about $50 in mine and it's removable for when you don't need it.



Love it!! ????


High quality part. I ended up making a John Deere Gator hitch out of it. I especially like the Bullnose radiused edge around the opening. Smooth to the touch and easy on the Shinbone! This part is highly recommended.


Worked great! I made a trailer hitch with this for my Honda Acty van and I use it all the time.


Nice part. Made a perfect receiver hitch for our old Model T


The USPS lost the first shipment. I called and etrailer quickly sent out a replacement.


Welded this to a existing hitch on my Mule 610, simple job to allow me to use ball mounts that are laying around the garage and no longer used on vehicles. Nice clean steel to weld, little or no prep work.



Great does what it is supposed to do!


Great for for what I needed. I attached this item to the winch bumper on the front of my Tracker so I can manuver trailers easily. This worked like a charm

Mike K.


Still working great. I welded the product on the winch mount bumper. on the front of my Chevy Tracker to move trailers in tight situations.


I wanted to add a receiver hitch to my compact tractor. It had the usual flat bar sticking out the back and aside from getting in the way of some of my attachments it was of limited use. I didn't really want a two inch receiver, one and a quarter inch would handle everything I wanted to do. But everywhere I went in town they only had two inch receivers in stock. So I went on line and etrailer had what I wanted, the price was certainly right and shipping was fast. I shortened the original bar hitch (no more interference with my scoop) and added the receiver and can now use a variety of receiver hitch attachments.


Awesome just what I needed to attach to a lawn garden tractor. They were honest and correct with their description of the item I ordered. I found nothing even close to this on E*** or on the net. For the money this is awesome.
Thanks for sending so quickly and well packaged.



awesome hitch


The package was delivered a day before the promised date, and the parts were as advertised. The service was fast, and the follow-up was amazing. I will return to etrailer for any parts I need in the future.

I ordered 2 of the 1-1/4" receivers, and am adding both to the existing hitch on my truck so that I can attach a 3-point frame that extends the "hitch" out past my camper so that I can safely pull my horse trailer with the camper mounted on the truck.


Excellent. I used this to fabricate a couple spare tire mounts on utility trailers. The tires were mounted on square stock that fit into the receiver


A couple of these welded to my trailer bumper should support a utility cargo carrier I'm fabricating nicely. They are raw steel, beefy and will be powder coated with the bumper. I'll probably add another ( 1 1/4" or 2") for a bicycle carrier.


Shipped quickly. I got just what I was looking for. All I needed was a light duty receiver to fabricate a bolt on to my small car (just need it for a bike rack and not to tow.) this is perfect.



Thank you for the quality receiver. Sorry no picture yet. I'm having my local weld shop fabricate a hitch for my Yamaha 950 V Star motorcycle so I can pull my dog behind me on a small trailer to local parks. Having this will speed up the job and get my pup in the wind with me safely.


Product is exactly what I wanted. Plan to use to mount guide bunks on my party barge trailer. Will serve as guide for party barge when loading on steep ramps and a significant portion of the trailer is under water. Remove when traveling down the road.

Etrailer provided great service. Prompt delivery. Product and quantity were what was ordered. Price was good as well.


cudo's to, I was on your web site and I called for help to find what I needed and your customer service was outstanding. I ordered the parts and received them promptly . Turns out I ordered the wrong parts and your return process was again outstanding. I would recommend to anyone who needs trailer products of any kind and I will be calling you back first, the next time I need anything. Great doing business with professionals. I cannot thank you enough.
Richard G.


Very fast delivery and courteous service. I used this product on the front end of my John Deere 6X4 Gator (had it welded to a custom winch mount) and, after shortening it a bit, it works great. Thanks for the great prices e-trailer!


We offer these one our Trip Trike motorcycle kits and our customers love them. We will continue to order in the future as the need arises. Thanks etrailer, you are our go to source for all our trailer needs.


fast delivery
The combo bar is exactly
as described. I plan to build a custom hitch for my motorcycle and it will be perfect.


Nice constructed receiver, smooth interior so hitch slides easily. Does have the same rust as pictured (not a concern for me but don't expect a rust free bare metal product).


I have ordered a couple items from E-Trailer. No complaints.
Shipping was on time.


I got tangled up in ordering online (my problem), but a call got me directly to the rep. He did a great job with the completing it, explaining, and sending email confirmation. In less than 48 hours the goods were at my front door! How does that happen the week before Christmas?! Great job etrailer, you're tending to business just right!




Good quality. Exactly what I wanted. Just need to find the time to weld up a hitch for my 1978 Chevette.


As promised, great product & fantastic delivery! I will recommend and use etrailer again!

Show More Reviews

See what our Experts say about this CURT Hitch Fabrication Parts

  • Thickness of the Combo Bar with 1-1/4" Trailer Hitch Receiver Part # E-911
    I spoke to my contact at Curt and they informed me that the thickness of the metal that is used on the Combo Bar with 1-1/4" Trailer Hitch Receiver part # E-911 is 3/16" thick. There are other dimensions of the combo bar on the product page if you need them. I have attached a review video for you as well.
    view full answer...
  • Motorcycle Hitch For 2004 Honda VTX1300R
    We don't carry any motorcycle hitches, but we do have the combo bar to get you started on a custom hitch. I recommend the Curt Combo Bar 6" with 1-1/4" Trailer Hitch Receiver, # E-911, to have a certified professional welder make you something for your bike.
    view full answer...
  • What are the Dimensions of the Combo Bar 6 inch
    The overall width of the Combo Bar 6 inch with 1-1/4 inch Trailer Hitch Receiver, part number E-911, is 1-5/8 inches. Other dimensions of note are 4 inches from center of hitch pin hole to back of the bar, 2 inches from center of the hitch pin hole to the front of the collar and the overall length is 6 inches.
    view full answer...
  • Receiver Tube For Custom Trailer Hitch Receiver on a 2021 Cadillac CT4
    You may be able to have a custom receiver made for your 2021 Cadillac CT4 using a Curt Weld-On 2" Receiver # E17. I do not see that any manufacturers are making a receiver that will fit your CT4 and the AT4 chassis is different so you will not be able to use one from that vehicle. A customization shop may be able to make you a receiver with the part above. We also have a 1-1/4" Receiver Tube # E-911 if you want the smaller tube for better ground clearance.
    view full answer...
  • Attachment of Winch Receiver to 1996 Jeep Cherokee Sport
    The easiest way to install a 2 inch receiver, front or back, on your 1996 Jeep Cherokee Sport is to use a custom fit receiver hitch. I would recommend the Draw-Tite Class III Receiver Hitch, item # 75054, for the rear and the Curt Front Mounted Receiver Hitch, item # 31084, for the front of your vehicle. If you want to use the Combo Bar 6" with 1-1/4" Trailer Hitch Receiver, item # E-911, for your jeep it would require fabrication of a mount and welding to secure it to the Jeep good enough...
    view full answer...
  • What 6 inch Combo Bar Can C49524 Fit Into
    The hitch combo bar part # C49524 could fit into the part # E-9 but not into the # E-911 as they are both the same size.
    view full answer...
  • How To Use a 2 Inch Cargo Carrier on a 1-1/4 Inch Trailer Hitch
    In order to use the 1-1/4" hitch on your 2017 Audi A3 with a Curt cargo carrier that has a 2" shank, you can use the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise part # HT5R which will give you the rise that you need as well for ground clearance. Unfortunately, we don't have all the parts you need to fabricate one of your own. Please note the use of this adapter will reduce your hitch's tongue weight capacity.
    view full answer...
  • Hitch Recommendations for a Scamp Trailer Bumper
    Depending on the dimensions of your trailer's bumper I believe we could have a solution for you that would not require welding. If you have a 4 inch by 4 inch bumper you could use the part # E-100. If you have 2x4 inch bumper you could use the # C19101. These have 2 inch openings though. For a hitch opening that measures 1-1/4 inch that would require welding on you would want the part # E-911. You will need to make sure that the bike racks you plan on using are rated for use on an RV. I...
    view full answer...
  • Recommended Hitch Adapter For 2" Receiver To Carry a 1-1/4" Bike Rack Higher On My Vehicle
    I recommend having a 2" to 1-1/4" hitch riser built for your Yakima Dr. Tray Bike Rack. Having a custom built riser will allow you to move the rack up for better ground clearance and keep it as close the the rear of your vehicle as possible. The Curt Solid Steel 2" Hitch Bar # D31 can be welded to the 6" Combo Bar 1-1/4" Receiver # E-911 with some steel plate or tubing. A local welding shop should be able to provide the additional material necessary to get the receiver tube where you...
    view full answer...
  • Is There a Custom Fit Trailer Hitch Receiver For a 2019 Volvo S60 T5 Inscription?
    It appears you will need to have a custom receiver fabricated for your 2019 Volvo S60 T5 Inscription. We have the 1-1/4" # E-911 or 2" # E-9 receiver tube that you can use to have a receiver fabricated. Currently none of our aftermarket manufacturers are producing a receiver for your Volvo. I was able to verify with Curt that their T-Connector Vehicle Wiring Harness # C56224 will fit your Volvo and give you a 4-way flat connector. This will connect to the tail lights on most small trailers...
    view full answer...
  • Availability of 1-1/4-Inch Combo Bar for Hitch Fabrication on Antique Tractor
    I can offer you a better option for installing a 1-1/4-inch receiver tube on your antique tractor. Curt offers several lengths of their 1-1/4-inch combo bar, which is a raw steel product ready for weld-on installation. Part # E-911 is 6-inches long, part # E-912 is 12-inches long and part # C49524 is 24-inches long. One of these will cost far less than a custom-fit hitch. Also, if you used a custom hitch like the one for a Corvette any modifications would void the item's warranty, so...
    view full answer...
  • Recommendation For a Quick Connect 1-1/4" Receiver To Attach On Tractor Drawbar?
    I think I will have a solution for you as the 1-1/4" Receiver Attachment # 391RR1 is only designed to lock into the block on a Stealth Hitches receiver. There would be no way to secure the end on your tractor. Instead we have the 6" # E-911 or 12" # E-912 receiver tubes. This would allow you to be able to fabricate a type of mount for the receiver or possibly weld it to a Curt Clevis Pin # C45803 which is a 1" diameter. You would need to add some steel to the front or rear which would prevent...
    view full answer...
  • Trailer Hitch Receiver For a 2008 Volvo C30
    Your 2008 Volvo C30 will need to have a custom receiver made as there is not a receiver that is confirmed to fit. The Curt Trailer Hitch Receiver # C11337 that you found is for the 2011-2013 model years. We have the Curt Weld-On 2" Receiver # E17 or Combo Bar 6" with 1-1/4" Trailer Hitch Receiver # E-911 to have a custom receiver made at your nearest customization shop. The Curt Upgraded Circuit Protected Powered Tail Light Converter w Hardwire Kit # C59496 can be used to allow for...
    view full answer...
  • Can 2 Inch Receiver be Welded to Buyers Products 2 Heavy-Duty Channel Tongue Coupler 3370091560
    You could weld on a receiver tube to the top channel part of the Buyers Products coupler # 3370091560 if you wanted to. Keep in mind though that this coupler is zinc plated so any welding should be done by someone with experience welding with zinc plated steel in a well-ventilated area. I am not sure what you will be using the receiver for but there are some products that mount to the front of a trailer and have a 2 inch receiver for accessories like a bike rack. We have the Bike Bunk,...
    view full answer...

Do you have a question about this Hitch Fabrication Part?

Info for this part was:

Employee Robert G
Expert Research:
Robert G
Employee Adam R
Expert Research:
Adam R
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.