Chevy Bowtie LED Lighted Trailer Hitch Cover - 1-1/4" and 2" Hitches - Black

Reese Hitch Covers - RP86530

Show your Chevrolet pride with this distinctive hitch cover that lights up when you activate your vehicle's tail lights or brakes. The black metallic coating appears transparent when the red LEDs shine through.

Features:

• Officially licensed, LED-lighted Chevrolet bowtie logo hitch cover adds a stylish touch to your vehicle
• Light-up emblem activates when running lights are on and brightens when the brake pedal is pressed
  • Low illumination while you're using tail lights
  • High illumination when you brake or turn on the hazard lights
• Black metallic coating appears transparent when lights are activated
• Red LEDs are long-lasting and energy efficient
• Hitch cover slides into receiver, keeping out dirt and grime
  • Mounting brackets and hardware included for both 1-1/4" and 2" receiver tubes
• Foam gaskets ensure a snug, rattle-free fit
• Wiring harness plugs into your vehicle's existing 4-pole trailer connector
• Durable plastic is corrosion resistant
• Hitch pin and clip or hitch lock sold separately

Specs:

• Application: 1-1/4" x 1-1/4" and 2" x 2" trailer hitch receivers
• Face dimensions: 6" wide x 3-1/4" tall
• 1-Year limited warranty

Reese has created this light-up hitch cover to look like an ordinary black Chevy bowtie logo in daytime, non-braking situations. When you turn on your vehicle's tail lights or activate the brakes, the cover's unique metallic coating appears transparent and bright red LEDs shine through. The long-lasting LEDs have 2 intensity levels. The red lights remain set at low illumination when your vehicle's tail lights are on. When you activate your brakes or turn on your hazard lights, the LEDs burn brighter to draw attention to your vehicle. The hitch cover will not flash when your turn signals are activated.

Hitch covers are fun to show off and they look cool, but they do more than just accessorize your vehicle. A hitch cover helps to keep dirt out of your receiver and deters rust, so you can easily insert ball mounts and other hitch accessories when you need them. This hitch cover is a great way to protect your receiver and proclaim your loyalty to the renowned Chevy brand, all in one.

Simple Assembly

Mounting brackets for both 1-1/4" and 2" hitch receivers are included. These 2-piece brackets attach to the back of the hitch cover face with the supplied hardware.

The 2" bracket has countersunk bolt holes that allow it to sit flush on the back of the emblem when fully assembled. There is a slot built into this bracket that allows you to pass the wiring through. The 1-1/4" bracket mounts on top of the threaded posts. Instead of passing the wires through a built-in slot, you are required to run the wires between the bracket and the emblem with this setup.

Note that the converter, which is necessary to keep the hitch cover from flashing when your turn signals are activated, can be tucked inside the assembled 2" mounting bracket. However, the module doesn't fit inside of the 1-1/4" bracket, so if you use this hitch cover on your 1-1/4" receiver, the converter will hang on the outside of the mounting bracket.

86530 Reese Towpower Light-Up Chevy Bow Tie Hitch Cover - Black