American Flag Hitch Cover for 2" Hitches - Interchangeable Faceplate - Red, White, and Blue

Video Transcript for Bright Hitch Hitch Covers - Flags and Political - 338AF100 Review

Speaker 1: Today we're gonna take a look at the American flag hitch cover for two-inch hitches with the interchangeable faceplate. Now hitch covers look cool, but they don't more than just accessorize your vehicle. This American flag hitch cover will help keep dirt out of your receiver and prevent rust so that you can easily install your ball mount and other hitch accessories when you need them.So this hitch cover is a great way to protect your hitch from dirt and debris, while showing love for America with this high-quality plastic hitch cover. This trailer hit cover will display the traditional red, white and blue American flag, and the faceplate is interchangeable. We do sell those separately, so you could swap it out for different looks. And the way you remove it, on each side there's a little slot.

You just push the screwdriver in there, it'll pop the clip on each side. And once you get it popped out, just sort of get it started, and you can see with it started, the faceplate will come right out. And then you can pick other designs and snap it right in place of that.Now this is a weather resistant ABS plastic construction, uses a dome gel graphic so it won't fade, crack or peel. And if you wanna put it back together, all you do is put the faceplate you choose in there, line it up and it'll snap right into place. Now this does require a five-eighths inch diameter hitch pin and clip, or hitch lock, to hold the cover into your receiver.

We do sell those items separately on our website, and they are usually listed on this product page as a related product. This part is made in the U.S.A.Again, the application is two inch by two inch, trailer hitch receivers. Measurement on the faceplate, over width is five inches, overall height is three inches tall. And just to show you, I have an example of a two-inch hitch receiver opening, so you can see this pitch cover has two holes, so you'd line it up with the hole that you need. So you just slide it in, that hole sticks out a little bit, if you slide a little bit further then you can use that hole.

So whichever hole would work for your application is what you would use.But that should do it for the review on the American flag hitch cover for two inch hitches with the interchangeable faceplate.