This shining hitch cover keeps out grime and puts the finishing touch on your Honda's hitch receiver. The Honda logo is presented in brilliant chrome-plated ABS plastic and showcased in 3-D on top of a rustproof, polished stainless steel face.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number AUT-HONP-C. This is the Honda trailer hitch cover for 2 inch hitches from automotive gold hitch covers. The hitch cover is officially licensed, the unit's designed to slide into your hitch and it's going to add a nice, clean, finished look to your hitch, but it's also going to do a good job of keeping out dirt and debris, which is going to prevent rust and corrosion to the hitch. We're going to have the 3D ABS plastic emblem, gives a really nice look, and it's going to have that chrome plating, which adds a classic style. Now, that emblem is going to sit on a polished, stainless steel base, so it's going to give a mirror-like shine. Stainless steel is also very resistant towards rust and corrosion.
This is a one-piece, riveted construction, so you don't have to worry about any assembly, it's ready to be installed on your hitch right out of the box. The only thing you will need to provide that is sold separately is going to be a hitch pin and clip, or a hitch lock. You can find those on our website if you don't already have one. This portion right here is the shank, this is going to be made from stainless steel as well. You can see that it offers three different pinholes, those are going to measure 5/8 of an inch in diameter, but they offer those three different choices, that way you can choose what ever one is going to work best for your particular application. It is designed for 2 inch by 2 inch trailer hitch receivers.
If we take a measurement of the shank, from the back of the face-plate to the end of the shank, we're looking at about 3 and a half inches. To the center of that first pinhole, we're looking at about 1 and 5/8 of an inch. To the center of the middle pinhole, we're looking at about 2 and 1/8 of an inch. To the center of the rear pinhole, we're looking at about 2 and 5/8 of an inch. The face-plate measuring in this direction, it going to give us a measurement of about 3 and 5/8 of an inch, and then going this direction, it's going to measure about 3 and 1/8 of an inch. Very simple installation, slide the shank into your hitch, line up your pinholes, and secure it to the hitch with the hitch pin and clip or hitch pin and lock.
The unit is covered with a lifetime warranty, and it's made right here in the USA. That's going to do it for today's look at part number AUT-HONP-C.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.