/
Au-Tomotive Gold/
Public Service and Military/
Air Force/
Army/
Marines/
Navy/
Coast GuardItem # AUT-POW-C
Retail:$51.45
Our Price: $36.65
You Save: 29%Orders above $99 qualify for Free Shipping
Show your support for our country's imprisoned or missing servicemen and women with this hitch receiver cover. The POW/MIA flag is outlined in chrome-plated ABS plastic and mounted on a rustproof, polished stainless steel base.
Features:
Specs:
Video of POW/MIA Flag Trailer Hitch Cover - 2" Hitches - Stainless Steel - Chrome and Black
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number AUT-POW-C. This is the POW/MIA flag trailer hitch cover for two-inch hitches. The unit's going to slide into your hitch receiver to help keep out dirt and prevent rust. It's also going to add a nice, clean, finished look to your hitch. We're going to have the black and white decal, that's going to be outlined in a chrome plated ABS plastic construction. Then on the internal part right here, we're going to have a nice vinyl coating, so that's going to protect the decal from chipping and fading.
It's going to protect it from water, chemicals, and UV rays. Now, that's going to sit on a polished stainless steel base. It's going to give a nice mirror-like shine. The base and the sleeve are going to be made from stainless steel, so that's going to be highly resistant towards rust and corrosion. We're going to have a nice, one-piece riveted construction, so now assembly required. It's ready to be installed in your hitch right out of the box.
The only thing that you're going to need to provide separately is going to be a hitch pin and clip, or a hitch pin and lock. You can see right here that it has three pin holes. This will receive a standard, five-eighth-inch pin and clip or pin and lock. Again, the unit's designed for two-inch by two-inch trailer hitch receivers. A few measurements we want to go over with your real quick, starting with the shank length. That's going to give us a measurement of three and a half inches.
Measuring to the center of that first pin hole from the back of that face plate, we're looking at one and eleven-sixteenths of an inch; to the center of the middle pin hole, we're looking at two and three-sixteenths of an inch. Into the center of the rear pin hole we're looking at two and eleven-sixteenths of an inch. The face plate is going to give us a diameter of four inches. The product is made in the USA, and it's going to be covered with a lifetime warranty. That's going to do it for today's look at part number AUT-POW-C.
Average Customer Rating: 4.7 out of 5 stars (241 Customer Reviews)
Show your support for our country's imprisoned or missing servicemen and women with this hitch receiver cover. The POW/MIA flag is outlined in chrome-plated ABS plastic and mounted on a rustproof, polished stainless steel base.The trailer left/right tail light assembly and the "POW/MIA" trailer hitch cover - all quality manufactured, arrived at my home 3 days after I completed my on-line order. I appreciate the professional and courteous service eTrailer extends its customers. 173050
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Very nice. 439799
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
This product is exactly what I was looking for, a well built quality product. I installed it on my pickup truck. I get many favorable comments. I was very pleased with my rep. Keep up the good work! 260232
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Everything from ordering the my tow hitch cover to shipment arrival was a very positive experience. And very timely! I will let family and friends know the great service I received. Well done. 529507
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Good quality and fast delivery 545010
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Trailer hitch plug is beautiful, very high quality. It is a birthday gift for my best friend. Being a proud Air Force vet, he is going to absolutely love it. 523080
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Products are in exellent condition and delivered promptly as promised. Has an excellent support team. had to change my order on the fly and adjustments were made quickly and accurately. Will buy again 218961
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Fits nicely. Everyone loves it, including myself. I like how it's well made. It's easy to clean, doesn't spot up like others. Looks great! 570344
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Great product, no issues and will purchase from etrailer again. 568833
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
The hitch cover itself is stunning and definitely an attention getter. It's unlike the ones everyone else runs around with from the local parts store. Shipping was very fast, the cover was professionally packaged to ensure a mar free product, and the customer service is awesome. Not your typical automated emotionless emails. Awesome experience over all, would buy from these guys again. 212992
Just as it should
Rob J - 07/18/2016Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Just got this receiver cover plate and really like the looks. I'm glad I bought the rattle free locking pin assembly as I think this would be a desirable item for sticky finger individuals. Tommy, the sales rep was very nice to deal with also. Thanks to etrailer for a good product and experience. 567740
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Emblem is still bright and clear. Lots of compliments from my Marine Corps brothers. Would recommend it. Semper Fi !! 444001
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
It looks nice, the Chrome Trim around the actual Black H Logo looks and feels thin because it is. I would have preferred something a little heavier. The actual metal extension that fits into the Receiver has a lot of play/ wiggle room inside. I wrapped mine with the flat protective padding it was shipped with to help reduce the play/rattle inside the receiver. Possibly a rubberized finish be suitable vs. the metal. Would I recommend it ? Probably, It does look pretty nice in the receiver. 362590
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Quality stainless fixture with metal emblem mounted securely. I am very happy with the unit. 200029
Still looks as good as the day I bought it
Tom M - 06/02/2016Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
I recently purchased a new vehicle & it has a trailer hitch on it. I have no use for the hitch, but it came on the vehicle. I wanted something to hide the presence of the hitch & went to etrailer,com to see what they might offer. I found the cutest smiley face & made my mind up that IS what I wanted. I called the 1 800 number & spoke with the nicest & most helpful person named Nicky. I got the smiley face in about a week & the workmanship & yellow color with black eyes is perfect. I love your website. Could not be more happy with the quality of the product, the efficient time I received my smiley face & the great & so helpful customer service. I will definitely tell friends & family about your site. 164290
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Had to wait a few weeks as my Ford Hitch cover was back ordered, but well worth the wait! etrailer was great to keep me updated through email while I waited. Love the product it looks great on my new Ford F150. I will definitely order again from them . 390917
Great product! Still looks like new. Thanks etrailer.
Adventure G - 06/09/2018Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Looks good on my F150 and Etrailer has great service! 576024
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Good looking hitch cover .... Quality materials ... Extremely satisfied ! 345207
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Overall, a little disappointed in the quality. It was made from thinner materials than I expected. Like others, I found it too loose inside the receiver and had to fabricate a spacer to keep it from rattling. Also be aware that it is more like 4" in diameter rather than the 3" stated in the description. 458870
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Very pleased with the product and follow up question. Very professional and product arrived very fast. Would definitely use etrailer in the future... 187904
Still using the Mazda cover and it is holding up well.Thanks for the follow up,
Mike H - 04/29/2016Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Looks great. Product as described. Fast shipping. Very pleased. 322690
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
In concept this is a great idea. I have a luxury car with the butt end of a trailer hitch sticking off the back. A rubber stopper continues the industrial look while too much bling as the same impact in the opposite direction. After several weeks (3-4?) of waiting for the item, when it arrived, it was what I had expected. When I placed it on the hitch though I was disappointed. It did not fit properly as it was too loose in the slot as the cut outs did not match up with the pin hole in the hitch and the bracket on the back of the emblem did not fit snuggly in the hitch. The end result was that it rattled (even with a tie down and it actually gave the impression of bling that I was trying to avoid. Not upset that I purchased it and I will carry it around in my trunk in case I have a change of heart. 302941
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
see photo 298270
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Very classy hitch receiver cover and great Birthday gift for my hubby, who was thrilled. When you look at back of SUV, it really stands out - not tacky but distinguished. We will see how it holds up with snow & salt, altho I scoured other reviews about corrosion resistance before I ordered, so I think this will hold up to that kind of weather. Also agonized after reading reviews about rattling & whether it would fit with standard 2" receiver and what kind of lock to buy. My concern was that my hitch receiver was a 2" square tube with welds on the very end that flared out on the sides like "wings." I did not understand how the metal prongs of the cover would fit outside and how the whole assembly would fit with a lock. I also did not have the auto available to measure diameter, full width, etc, and just took a chance to order standard 2" stuff. Well, the metal prongs of the cover fit inside (not on the outside -so no interference with the "weld wings" on the end of the receiver) and they fit into the hitch receiver walls snugly. Also my receiver has hard plastic on the end, and there is about 1/8" space between cover & hitch, so no rattles. (The other receiver cover I ordered (OU) came with a rubber spacer which was good to have for my other SUV with only metal receiver.) The 2" stainless steel (flush) 5/8" diameter hitch receiver lock 40107 works great - right dia, and length - as I need to have a little room to get my hands between bumper & recessed opening "cut out" for the trailer hitch. Any longer would have been difficult to handle the keys in the lock. Very little play and only heard rattle once when going over speed bump too fast/landed too hard. (oops - good thing that was in hubby's car!) 224798
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Ordered two hitch covers...one for my wife (her request!!) and one for my son. The covers are made well and frankly look very good on our vehicles. Ordering was easy and delivery was received on time. I will order from eTrailer.com again. 171323
both are in great shape and my wife and son really like the covers. Thanks for asking and also for checking in on your product.
Joe G - 02/06/2016Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Product received well packaged and in time expected. Fit and finish remains excellent one year after being mounted on the car. It adds individuality to the car that no one else has, while keeping the hitch cavity clean. I certainly recommend it. 671758
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
We received the trailer hitch cover very promptly and we really love it. It fits perfectly and looks great. It's a great product. Made better because it's made in the USA. 669177
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Love the hitch cover. Thanks!!!! 668526
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Product as advertised 668522
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
All products bought from etrailer.com have been as advertised. All products purchased are excellent. Products purchased are, Blue ox tow receiver, 6 inch drop/rise. A very strong, well made product. Also, a set of LED tow lights, for my scooter carrier. A 'Quiet hitch lock', which ensures no movement in my hitch at all. Lastly, a hitch plug, a little bit of 'whimsy', many thanks to the reps., at etrailer.com, their knowledge and advice has been invaluable. 665941
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Very nice,,,presidential looking!! 654743
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Product as described and fast delivery! 653086
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Nice quality metal/chrome, not plastic.. Make sure you also have or buy a pin to keep it in the hitch. I have bought 3 seperate items from this company and they are fantastic! I was never one to show constant support for this country until I became aware of the deep state. 652405
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Received item as described. Highly recommend etrailer great service as always 650338
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
I like it. Made well. I should have bought chrome, but that's my fault. 649584
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
It's still hanging in there, looking beautiful, and high quality. Would do it again, if needed. 647203
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Liked the look of the product, but when going through a car wash about 10 months after purchasing, the USA name plate got ripped off. Just a white blank piece of metal was left. 639986
It is recommended to remove hitch covers, roof racks, towing mirrors, etc when using automatic car washes.
--
Rachael H - 05/14/2019Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Excellent product. I've had for over a year and it still looks brand new. 625377
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Pretty, well built and suits my car colour! Locked it in place using regular trailer locking pin so nobody steals it LOL very solid. 621684
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
The hitch cover for my Lincoln MKX fit the image of the car. It is high quality in appearance. The pin and clip provides a semi-secure way to keep it in place. Very satisfied with both products. I am a repeat customer and will definitely keep doing business with etrailer.com. Also, it arrived a day earlier than estimated. 616688
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Good quality product 613826
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Very well made. Looks great on my truck. The stainless steel construction is perfect. 612250
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
The hitch cover itself is just fine, sturdier center section than anticipated but some concerns about the trim ring being equally sturdy. etrailer's service, however, was exemplary and without concerns. Initially, this was back-ordered, and I received a prompt update call after placing the order. It arrived more swiftly than first projected, was very well packaged, and is precisely the right product ordered. Thank you and well done. 604537
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
I gave this 4 stars, why not 5? there is nothing but one single rivet keeping it from coming apart. ONE little tiny rivet not even a screw. SO it can break again and then I will have to find a way to hold it together better using a screw with a nut. Other than that , it is quite beautiful and for $44 it should be! I actually went to our local hardware store and bought a lock pin so that no one could steal it. Now I am up to $ 56. Oh well. Sure dresses up my back side of the car. I have a friend at the Y who put in 30 years at the Air Force and I will hear from him what he thinks when he sees it. 602842
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Well made hitch cover! 599882
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Very nice finish on this product and fit well in my 1ΒΌ" hitch 596544
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
The whole transaction and experience went smoothly. Received items pretty quickly. 591679
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
I bought a Jeep logo hitch for my husbands wrangler for Christmas last year. He loves it and has gotten lots of compliments on how nice it looks. I would recommend this company for anyone looking for that special gift for that special man. 590612
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
I appreciate the chance to give you some feedback. We have had the hitch cover on the car for about a year. It's certainly better than the rubber stopper that Acura provided. However, in the spirit of continuous improvement, here are areas where I have been not fully satisfied: The emblem area has started to peel. Since this is the cosmetic area of the hitch cover, the peeling distracts from the aesthetics. The mounting sheet metal (behind the emblem) did not fit snugly in the hitch, which caused the overall assembly to rattle when the car was in motion. I did some sheet metal surgery to the mount so that I could place the hitch cover firmly against the hitch receiver, but I would have rather not have had to do this. 590295
Review from a similar Au-Tomotive Gold Stainless Steel in Hitch Covers
Was just what my Dad wanted!!! Excelle nt!!! 590070
Ask the Experts about this Au-Tomotive Gold Hitch Covers
At etrailer.com we guarantee:
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.