Black Friday Deals are Here!
Show up at The Swamp with this hitch cover and you're sure to make Albert proud. The sparkling crystal and chrome Gators logo is mounted on a rust-resistant, black powder coated base to ensure that your hitch cover will look great for years.
Features:
Specs:
Hitch covers are fun to show off and they look cool, but they do more than just accessorize your vehicle. Your University of Florida hitch cover helps to keep dirt out of the receiver and deters rust, making it easier to install ball mounts and other hitch accessories the next time you need them.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Florida Gators 2 inch hitch cover from AMG. The hitch cover's going to allow you to show your school pride. It also adds a clean finished look to your hitch and it's going to help keep dirt and grim out of the receiver tube of your hitch. The hitch covers are made from a steel construction. It's going to feature a really nice black powered coat finish over the entire unit which is going to do a great job at resisting rust and corrosion. Here at the front, we're going to have the crystal embedded chrome plated emblem. It gives it a really nice look, very strong durable design.
It's got a nice rust proof and fade proof design. The product's made right here in the USA. Here on the back we have a foam gasket that goes around the piece that slides into the receiver tube of your hitch. The foam gasket's going to do a good job at reducing rattle between the hitch and the hitch cover. This is an official licensed product, it does require a hitch pin and clip or a hitch lock to get it fully secured into your hitch, those items are sold separately, so if you're in need of one, you can find them here at e-trailer.com. The pinholes on the hitch cover will accept a standard 5/8 inch diameter pin. We're going to take a look at some measurements real quick, starting here at the hitch cover face. Overall width is going to be around 5 inches.
Overall height is going to be around 3 1/2 inches and then the distance that we have from the back of the foam pad to the center of the hitch pinhole is going to be pretty close to 2 1/2 inches. Now this is designed for a 2 inch by 2 inch hitch. Very simple installation process, just slide it into the receiver tube of your hitch, line up the pin holes and secure it with your hitch pin and clip or hitch lock. That's going to do ti for today's look at the Florida Gators 2 inch hitch cover.
Average Customer Rating: 4.8 out of 5 stars (1491 Customer Reviews)
Show up at The Swamp with this hitch cover and you're sure to make Albert proud. The sparkling crystal and chrome Gators logo is mounted on a rust-resistant, black powder coated base to ensure that your hitch cover will look great for years.This trailer hitch cover is a work of art! When I ordered it was out of stock and the people at ETRAILER were so nice, letting me know my order would be delayed and asking if I wanted to select another product. I opted to wait for my first choice and it was so worth it. I love the gator, just the right amount of Bling!
Jilly C - 06/19/2018
I actually ordered the wrong hitch cover. It was supposed to be for a male, but the hitch had glitter, which I didn't know about. I ended up giving it to my Aunt, who I believe is enjoying it!
Thanks for the follow up.
Love this hitch cover. Looks awesome!
Review from a similar Black Powder Coated in Hitch Covers
Wish I found you guys first...nice quality over my first hitch cover!!
Lloyd D - 10/20/2022Review from a similar Black Powder Coated in Hitch Covers
The hitch cover is perfect in detail,powder coated with U.S.M.C.enblem and fits a 2" trailer hitch.
Review from a similar Black Powder Coated in Hitch Covers
Perfection and quality. My husband is a Marine. We are proud of his service like we are all who serve. I've seen inexpensive (cheap and cheesy) hitch covers, but wanted quality only while respecting the Marine logo. This is it. Thank you.
Shaweety - 07/04/2021Review from a similar Black Powder Coated in Hitch Covers
Love the quality of the workmanship. I feel it’s a great compliment for our vehicle
Randy - 11/16/2022Review from a similar Black Powder Coated in Hitch Covers
It looks even nice in person than online. Easy assembly and quality product. I forwarded this hitch cover to my friend and fellow Marine.
Eric J - 07/26/2022Review from a similar Black Powder Coated in Hitch Covers
This was not checked for quality prior to shipping from the manufactor or the seller. My logo is off center at the bottomand over to the passenager side. Also my logo is crooked tilting up toward the passenager side. Tried calling customer service but the line has not been manned since I recieved this product. Overall a disappointing experience.
Brooke M - 09/14/2021Review from a similar Black Powder Coated in Hitch Covers
My husband Bought this for my father in law. It looks really good he has a new Colorado. I didn’t know it was what my husband bought and commented on how nice it looked just the other day and it’s been a year that he had it! It does look really good!
Review from a similar Black Powder Coated in Hitch Covers
It looks great on my partner’s black truck with his KAPOW vanity plate! It’s great quality. He put a lock on it to keep it safe. Very satisfied. Thanks George!
Review from a similar Black Powder Coated in Hitch Covers
Did a lot of research on this product and it came through with flying colors. I ordered this product and one other from another site. This cover was superior in thickness size and chrome. Also the pin opening is large enough for standard 4" pins. If you are considering this product I suggest you don't wait. As for the company, great service. I was contacted shortly after the purchase, tracked the item and was contact about satisfaction after delivery. Outstanding. Will not return item but with their attention to detail I am sure if there were anything of issue the company would be on top of it. Thank you I will be ordering from you again.
Ron Q - 07/23/2018Review from a similar Black Powder Coated in Hitch Covers
Before I took it out of the box, I could tell that this was a high quality product. The colors are bright and the fit is perfect. The foam seal to keep water out of the hitch was an unexpected nice touch. It looks great on my truck.
Be advised, it does not come with any kind of retaining device, you will need a hitch pin to keep it in place. I purchased a locking pin because something as nice as this would probably get stolen.
Dean - 05/30/2020Review from a similar Black Powder Coated in Hitch Covers
I took about a month shopping before I purchased. The one thing I didn't want was a cheap plastic hitch cover representing my team. I love this hitch cover because it is high quality and really stands out. After having it a year it still looks like it did the day it arrived. Thank you etrailer for outstanding quality. Two thumbs up!!!!!
Joe M - 11/15/2017Review from a similar Black Powder Coated in Hitch Covers
I am very pleased with the new hitch cover I ordered from etrailer.com. It was reasonably priced and is made of outstanding material. It was shipped and received very promptly and has already attracted and drawn numerous compliments. It enables me to continue showing pride and esprit de corps of the 1st Calvary Division in which I served during the Vietnam War. I would not hesitate to order other products from etrailer.com in the future and highly recommend them for anyone considering similar purchases.
JIm J - 07/30/2020Review from a similar Black Powder Coated in Hitch Covers
This hitch cover still looks brand new.
Review from a similar Black Powder Coated in Hitch Covers
Product is very durable, of high quality and still looks brand new with no fading or rust after a year. I live on a island with salt water conditions and high Uv light. I have other metal items that look like it’s tens years old and rusting through approximately the same age I highly recommend the product if your in the market for such a item.
Review from a similar Black Powder Coated in Hitch Covers
1CD, 2STB, happy with the product!
Review from a similar Black Powder Coated in Hitch Covers
High qualityhitch. USMA emblem is 1st class.
I like the lock is very positive and I feel it will be secure.
Good turn around time from supplier.
Review from a similar Black Powder Coated in Hitch Covers
WOW!!! WHAT A BEAUTIFUL RECEIVER COVER! TOP QUALITY. PERFECT WAY TO SHOW MY SERVICE TO MY COUNTRY WHEN I'M NOT TOWING!!! THANKS ETRAILER!!!
sal s - 03/07/2020Review from a similar Black Powder Coated in Hitch Covers
Thanks for your message and following up a year later! I have purchased two of these hitch covers for both of our cars. I'll attach pictures. I believe the first one I bought was 2 years ago and the second was a year ago. The two year old cover has shown a great deal of rust and deterioration over those two years. The other one is in much better shape but I would expect the same to happen over this next year.
I do live in Pittsburgh, a very rainy and humid climate for most of the year. Obviously in winter months, we get a lot of snow and ice with the roadways covered with salt. I'm sure those factors contribute to the rusting of this product.
I'll be happy to log in and make a review post similar to above if you would like me to. I have been a happy customer of yours with a few of these similar products.
Thanks!
Review from a similar Black Powder Coated in Hitch Covers
Terrible. I received it on Fri, drove up to Tahoe on Mon and hit the slopes on Tues. The logo fell off when I hit my hiking boot (light, day hiker type) against the cover to knock off some snow. I wasn't even wearing the boot, it was in my hand. I didn't even hit the logo itself, or bang it hard. The main receiver cover is otherwise well made and fits snugly.
Review from a similar Black Powder Coated in Hitch Covers
For the price I expected better quality. The powder coating seems to be okay. However, there are pits in the chrome plating of the USAF logo. The pits are not noticeable at a distance, so I didn't return it. Now, as an afterthought, I'm hoping it doesn't rust. Apparently there's not a standard distance to the pin hole in 2" receivers. I had to add 1/2 inch of gasket material in addition to the gasket provided to stabilize the cover in my receiver.
Review from a similar Black Powder Coated in Hitch Covers
The Arizona State University hitch cover I purchased through etrailer matches every detail of my Jeep Wrangler and allows me to show off my school pride in style.
Review from a similar Black Powder Coated in Hitch Covers
Proud to display the flag in this receiver cover! Still looks great after a year!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.